Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with HaPs, especially tetragonal methylammonium lead triiodide (MAPbI 3 ). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to the spatial separation of electrons and holes, a possibility if MAPbI 3 is a semiconducting ferroelectric, which, however, requires clear experimental evidence. As a first step, we show that, in operando, MAPbI 3 (unlike MAPbBr 3 ) is pyroelectric, which implies it can be ferroelectric. The next step, proving it is (not) ferroelectric, is challenging, because of the material's relatively high electrical conductance (a consequence of an optical band gap suitable for PV conversion) and low stability under high applied bias voltage. This excludes normal measurements of a ferroelectric hysteresis loop, to prove ferroelectricity's hallmark switchable polarization. By adopting an approach suitable for electrically leaky materials as MAPbI 3 , we show here ferroelectric hysteresis from well-characterized single crystals at low temperature (still within the tetragonal phase, which is stable at room temperature). By chemical etching, we also can image the structural fingerprint for ferroelectricity, polar domains, periodically stacked along the polar axis of the crystal, which, as predicted by theory, scale with the overall crystal size. We also succeeded in detecting clear second harmonic generation, direct evidence for the material's noncentrosymmetry. We note that the material's ferroelectric nature, can, but need not be important in a PV cell at room temperature.halide perovskites | photovoltaics | semiconductors | ferroelectricity | pyroelectricity N ew optoelectronic materials are of interest for producing solar cells with higher power and voltage efficiencies, lower costs, and improved long-term reliability. A very recent entry is the family of halide perovskites (HaPs), in particular those based on methylammonium (MA) lead iodide (MAPbI 3 ), MAPbBr 3 , and its inorganic analog CsPbBr 3 . Devices based on these perform remarkably well as solar cells (1, 2), as well as in other optoelectronic applications, such as LEDs and electromagnetic radiation detectors (3-5). Understanding possible unique characteristics of HaPs may show the way to other materials with similar key features.The ABX 3 (X = I, Br, Cl) HaP semiconductors (SCs), that is, with perovskite or perovskite-like structures, reach, via a steep absorption edge, a high optical absorption coefficient (∼10 5 cm −1 ) (6, 7), long charge carrier lifetimes (∼0.1-1 μs) (8), and reasonable carrier mobilities (less than or equal to ∼100 cm 2 ·V −1 ·s −1 ) (9), and have a low exciton binding energy (10). With these characteristics, the thickness of the optical absorber layer can be ≤0.5 μm, which allows the charge carriers (separated electrons and holes) to diffuse/d...

Young's moduli of selected amino acid molecular crystals were studied both experimentally and computationally using nanoindentation and dispersion-corrected density functional theory. The Young modulus is found to be strongly facet-dependent, with some facets exhibiting exceptionally high values (as large as 44 GPa). The magnitude of Young's modulus is strongly correlated with the relative orientation between the underlying hydrogen-bonding network and the measured facet. Furthermore, we show computationally that the Young modulus can be as large as 70-90 GPa if facets perpendicular to the primary direction of the hydrogen-bonding network can be stabilized. This value is remarkably high for a molecular solid and suggests the design of hydrogen-bond networks as a route for rational design of ultra-stiff molecular solids.

No abstract

Doping is a primary tool for the modification of the properties of materials. Occlusion of guest molecules in crystals generally reduces their symmetry by the creation of polar domains, which engender polarization and pyroelectricity in the doped crystals. Here we describe a molecular-level determination of the structure of such polar domains, as created by low dopant concentrations (<0.5%). The approach comprises crystal engineering and pyroelectric measurements, together with dispersion-corrected density functional theory and classical molecular dynamics calculations of the doped crystals, using neutron diffraction data of the host at different temperatures. This approach is illustrated using centrosymmetric α-glycine crystals doped with minute amounts of different L-amino acids. The experimentally determined pyroelectric coefficients are explained by the structure and polarization calculations, thus providing strong support for the local and global understanding of how different dopants influence the properties of molecular crystals.

To experimentally (dis)prove ferroelectric effects on the properties of lead-halide perovskites and of solar cells, based on them, we used second-harmonic-generation spectroscopy and the periodic temperature change (Chynoweth) technique to detect the polar nature of methylammonium lead bromide (MAPbBr3). We find that MAPbBr3 is probably centrosymmetric and definitely non-polar; thus, it cannot be ferroelectric. Whenever pyroelectric-like signals were detected, they could be shown to be due to trapped charges, likely at the interface between the metal electrode and the MAPbBr3 semiconductor. These results indicate that the ferroelectric effects do not affect steady-state performance of MAPbBr3 solar cells.

material gives rise to a range of interesting properties such as superconductivity, [1] high electron mobility, [2,3] ferromagnetism [4,5] and 2D electron gases. [6] In the multitude of the properties exhibited by SrTiO 3 , pyroelectricity, ferroelectricity, and piezoelectricity are markedly absent as these properties are symmetry prohibited in centrosymmetric crystal lattices. The polar phase required for exhibiting these properties can, however, be induced artificially by modification of the lattice. Large biaxial strain, [7] light pulses, [8,9] and elemental substitutions [10] can convert SrTiO 3 into a ferroelectric material, whereas strain gradients can induce a polarization via the flexoelectric effect [11,12] or oxygen vacancies migration. [13] Electron diffraction measurements furthermore show that the top TiO 2 surface layer of SrTiO 3 undergoes surface relaxation and oxygen ions move outward from the surface relative to the titanium ions, leading to a polarization of this layer. [14][15][16] This is supported by shell model and density functional theory calculations. However, the calculations also predict that the SrO layers underneath display a polarization opposite to that of the TiO 2 surface layer, [17][18][19] leaving the question of the predicted net polarization and a possible pyroelectricity at the surface wide open.Symmetry-imposed restrictions on the number of available pyroelectric and piezoelectric materials remain a major limitation as 22 out of 32 crystallographic material classes exhibit neither pyroelectricity nor piezoelectricity. Yet, by breaking the lattice symmetry it is possible to circumvent this limitation. Here, using a unique technique for measuring transient currents upon rapid heating, direct experimental evidence is provided that despite the fact that bulk SrTiO 3 is not pyroelectric, the (100) surface of TiO 2 -terminated SrTiO 3 is intrinsically pyroelectric at room temperature. The pyroelectric layer is found to be ≈1 nm thick and, surprisingly, its polarization is comparable with that of strongly polar materials such as BaTiO 3 . The pyroelectric effect can be tuned ON/OFF by the formation or removal of a nanometric SiO 2 layer. Using density functional theory, the pyroelectricity is found to be a result of polar surface relaxation, which can be suppressed by varying the lattice symmetry breaking using a SiO 2 capping layer. The observation of pyroelectricity emerging at the SrTiO 3 surface also implies that it is intrinsically piezoelectric. These findings may pave the way for observing and tailoring piezo-and pyroelectricity in any material through appropriate breaking of symmetry at surfaces and artificial nanostructures such as heterointerfaces and superlattices. PyroelectricitySrTiO 3 has been the object of immense attention for over half a century owing to its multifunctional nature and popularity as a template for epitaxial growth of artificial nanostructures such as heterostructures, superlattices, and vertically aligned nanostructures. It is a classic example whe...

Molecular one-dimensional topological insulators (1D TIs), which conduct through energetically low-lying topological edge states, can be extremely highly conducting and exhibit a reversed conductance decay, affording them great potential as building blocks for nanoelectronic devices. However, these properties can only be observed at the short length limit. To extend the length at which these anomalous effects can be observed, we design topological oligo[n]emeraldine wires using short 1D TIs as building blocks. As the wire length increases, the number of topological states increases, enabling an increased electronic transmission along the wire; specifically, we show that we can drive over a microampere current through a single ∼5 nm molecular wire, appreciably more than what has been observed in other long wires reported to date. Calculations and experiments show that the longest oligo[7]emeraldine with doped topological states has over 106 enhancements in the transmission compared to its pristine form. The discovery of these highly conductive, long organic wires helps overcome a fundamental hurdle to implementing molecules in complex, nanoscale circuitry: their structures become too insulating at lengths that are useful in designing nanoscale circuits.

Young’s moduli of selected amino acid molecular crystals were studied both experimentally and computationally using nanoindentation and dispersion‐corrected density functional theory. The Young modulus is found to be strongly facet‐dependent, with some facets exhibiting exceptionally high values (as large as 44 GPa). The magnitude of Young’s modulus is strongly correlated with the relative orientation between the underlying hydrogen‐bonding network and the measured facet. Furthermore, we show computationally that the Young modulus can be as large as 70–90 GPa if facets perpendicular to the primary direction of the hydrogen‐bonding network can be stabilized. This value is remarkably high for a molecular solid and suggests the design of hydrogen‐bond networks as a route for rational design of ultra‐stiff molecular solids.