Causes of MV after surgery are heterogeneous, vary with time, and have variable impact on the duration of MV.

To date, few data on how the COVID-19 pandemic and restrictions affected children's physical activity in Europe have been published. This study examined the prevalence and correlates of physical activity and screen time from a large sample of European children during the COVID-19 pandemic to inform strategies and provide adequate mitigation measures. An online survey was conducted using convenience sampling from 15 May to 22 June, 2020. Parents were eligible if they resided in one of the survey countries and their children aged 6-18 years. 8,395 children were included (median age [IQR], 13 [10-15] years; 47% boys; 57.6% urban residents; 15.5% in self-isolation). Approximately two-thirds followed structured routines (66.4% [95%CI, 65.4-67.4]), and more than half were active during online P.E. (56.6% [95%CI, 55.5-57.6]). 19.0% (95%CI, 18.2-19.9) met the WHO Global physical activity recommendation. Total screen time in excess of 2 hours/day was highly prevalent (weekdays: 69.5% [95%CI, 68.5-70.5]; weekend: 63.8% [95%CI, 62.7-64.8]). Playing outdoors more than 2 hours/day, following a daily routine and being active in online P.E. increased the odds of healthy levels of physical activity and screen time, particularly in mildly affected countries. In severely affected countries, online P.E. contributed most to meet screen time recommendation, whereas outdoor play was most important for adequate physical activity. Promoting safe and responsible outdoor activities, safeguarding P.E. lessons during distance learning and setting pre-planned, consistent daily routines are important in helping children maintain healthy active lifestyle in pandemic situation. These factors should be prioritised by policymakers, schools and parents.

Gene expression analysis of colon biopsies using high-density oligonucleotide microarrays can contribute to the understanding of local pathophysiological alterations and to functional classification of adenoma (15 samples), colorectal carcinomas (CRC) (15) and inflammatory bowel diseases (IBD) (14). Total RNA was extracted, amplified and biotinylated from frozen colonic biopsies. Genome-wide gene expression profile was evaluated by HGU133plus2 microarrays and verified by RT-PCR. We applied two independent methods for data normalization and used PAM for feature selection. Leave one-out stepwise discriminant analysis was performed. Top validated genes included collagenIVα1, lipocalin-2, calumenin, aquaporin-8 genes in CRC; CD44, met proto-oncogene, chemokine ligand-12, ADAM-like decysin-1 and ATP-binding casette-A8 genes in adenoma; and lipocalin-2, ubiquitin D and IFITM2 genes in IBD. Best differentiating markers between Ulcerative colitis and Crohn's disease were cyclin-G2; tripartite motif-containing-31; TNFR shedding aminopeptidase regulator-1 and AMICA. The discriminant analysis was able to classify the samples in overall 96.2% using 7 discriminatory genes (indoleamine-pyrrole-2,3-dioxygenase, ectodermal-neural cortex, TIMP3, fucosyltransferase-8, collectin sub-family member 12, carboxypeptidase D, and transglutaminase-2). Using routine biopsy samples we successfully performed whole genomic microarray analysis to identify discriminative signatures. Our results provide further insight into the pathophysiological background of colonic diseases. The results set up data warehouse which can be mined further.

No abstract

Background: The purpose of this research was to investigate the effects of disinfection and three different sterilization methods on the dimensional changes and mechanical properties of three-dimensional (3D) printed surgical guide for implant therapy. The objective was to assess the effects of sterilization procedures in 3D printed drill guide templates with destructive and non-destructive material testing. Methods: Fifteen identical drill guide templates were produced using a 3D printer. The surgical guides were classified into five groups: three controls, three disinfected (4% Gigasept®, 60 min), three plasma sterilized, three autoclave sterilized (+ 1 bar, 121°C, 20 min), and three autoclave sterilized (+ 2 bar, 134°C, 10 min). The templates were digitalized with a Steinbichler SCAN ST 3D scanner. Length was measured under an SZX16 stereomicroscope. A scanning electron microscope was used to study the surface morphology of the drill templates. The hardness, and flexural and compressive strength were measured to assess any changes in the physical characteristics of the material caused by sterilization. The drill guide templates were also examined with a Dage XiDAT 6600 X-ray. During the X-ray examinations, the following parameters were used: 100 kV voltage, 128 AVG averaging, 0.8 W power. One-way analysis of variance (ANOVA) was used to detect the difference between groups. Results: Evaluation of the hardness measurements of the various specimens shows that the hardness of the material was not changed by the plasma sterilization (p = 0.0680), steam sterilization on 121°C (p = 0.6033) or disinfection process (p = 0.1399). The statistical analysis revealed significant difference in hardness strength of the autoclave sterilized (134°C) specimens (p = 0.0002). There was no significant difference between the goups regarding the scanning electron microscopic and stereomicroscopic examinations. There was no significant difference regarding the X-ray visibility of the templates to the effect of the disinfection (p = 0.7844), plasma sterilization (p = 0.4091) and steam sterilization on 121°C (p = 0.9277) and steam sterilization on 131°C (p = 0.093). The effect of the sterilization was the same in case of both flexural and compressive strength of the material. Conclusions: Our findings indicate that plasma sterilization and steam sterilization at 121°C were both suitable for sterilizing the tested 3D printed surgical guides.