The first reported use of a carbon paste electrochemical detector for microchip capillary electrophoresis (CE) is described. Poly(dimethylsiloxane) (PDMS)-based microchip CE devices were constructed by reversibly sealing a PDMS layer containing separation and injection channels to a separate PDMS layer that contained carbon paste working electrodes. End-channel amperometric detection with a single electrode was used to detect amino acids derivatized with naphthalene dicarboxaldehyde. Two electrodes were placed in series for dual electrode detection. This approach was demonstrated for the detection of copper(II) peptide complexes. A major advantage of carbon paste is that catalysts can be easily incorporated into the electrode. Carbon paste that was chemically modified with cobalt phthalocyanine was used for the detection of thiols following a CE separation. These devices illustrate the potential for an easily constructed microchip CE system with a carbon-based detector that exhibits adjustable selectivity.
Pt based mono/bi/tri-metallic nanocomposites on different carbon based supports (activated carbon (AC), carbon nanotubes (CNTs) and carbon nanofibers (CNFs)) were synthesised and Pt surface enrichment achieved. The overall theoretical metallic content (Pt + Au + Sn) was 20% (w/w) in all mono/bi/tri-metallic nanocomposites and was found to be uniformly distributed in the supporting matrix (80%). The surface morphology and composition of the synthesised materials was characterised using scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDX), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analysis (TGA), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), while cyclic voltammetry was employed in order to confirm their typical metallic electrochemical characteristics. Electrochemical measurements indicated that Pt(2)Au(1)Sn(1) trimetallic catalysts demonstrated a significantly higher electrochemically active surface area relative to activated carbon supported PtAu based bimetallic counterparts. The results show that the CNT based trimetallic catalyst (Pt(2)Au(1)Sn(1)/CNT) showed greatest electroactive surface area (49.3 m(2)/g) and current density for methanol oxidation in acidic (490 mA mg(-1) Pt) as well as basic (1700 mA mg(-1) Pt) conditions. Results demonstrated that in comparison to Au/C and Sn/C (no/negligible response), the presence of a small amount of Pt in the Au and Sn based nanocomposites, significantly modified the catalytic properties. The activated carbon supported bimetallic (Pt(1)Au(3)/C) catalyst showed reasonably good response (260 mA mg(-1) Pt) among all bimetallic nanomaterials examined. The current response achieved for Pt(2)Au(1)Sn(1)/CNT was 1.9 times (in acidic media) and 2.1 times (in basic media) that for synthesised Pt/C in terms of per mg Pt activity. Overall the methanol oxidation studies demonstrated that the presence of Au and Sn in Pt based catalysts strongly indicated their capacity to reduce the precious Pt content required for this application, demonstrating the role of Au in improving current/potential response and signifying the importance of supporting matrices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.