In this work, the effect of flame spraying parameters on physical, structural and microstructural characteristics of Al 2 O 3-13 wt.% TiO 2 (AT-13) coatings were studied. NiCrAl and AT-13 feedstock powders were used for spraying a bond coat (BC) and a top coat (TC), respectively, onto a 7075 aluminum alloy substrate. The effect of acetylene-to-oxygen ratio and the spraying distance on surface roughness, crystalline phases, porosity and thickness of top coat were analyzed. The results showed that for the evaluated spraying conditions, the volumetric oxy-fuel ratio had significant effects on roughness, porosity and crystalline phases of the coating. On the other hand, the spraying distance affected the thickness of the coating and did not influence the formation of Al 2 TiO 5 phase; no significant effect of spraying distance on roughness was observed. The results showed that an acetylene: oxygen volumetric ratio of 1:2.5 is preferable to obtain higher melting of the ceramic powders and therefore a denser coating with major content of γ-Al 2 O 3 crystalline phase.
Se seleccionaron, caracterizaron, procesaron y depositaron sobre ladrillos refractarios, dos residuos industriales provenientes de procesos de la industria petroquímica y termoeléctrica, así como un mineral de cromita. La composición química y las fases cristalográficas de cada uno de estos polvos fueron determinadas mediante Fluorescencia y Difracción de Rayos X, mientras que la morfología y tamaño de partícula fueron analizados mediante Microscopía Electrónica de Barrido. Estos polvos fueron depositados mediante proyección térmica oxiacetilénica sobre ladrillos refractarios silico-aluminosos y concretos de alta alúmina de bajo cemento, cuyas referencias comerciales de la empresa Erecos S.A.S. son ER-40 y CBC-50 respectivamente. Los parámetros utilizados para la elaboración de los recubrimientos fueron optimizados a partir de recubrimientos elaborados previamente y de los resultados de simulaciones realizadas con el software Jets&poudres. De los recubrimientos obtenidos el que presentó mayor homogeneidad en su estructura fue el elaborado con el mineral de cromita, los demás evidenciaron gran cantidad de partículas sin fundir y mayor porosidad. Sin embargo, por la composición química, su buena adherencia y las fases presentes en los recubrimientos todos son potenciales candidatos para ser usados como medio protector contra el deterioro de refractarios expuestos a altas temperaturas.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.