BackgroundWe report a case of using 3D printing to create a bespoke eye cover for an 18-year-old man with left maxillary alveolar rhabdomyosarcoma. Further, the patient had proptosis causing chemosis and subsequent conjunctival abrasions. This had been managed by taping a large dressing around the eye for a number of weeks previously.MethodsA 3D scanner was used to capture the surface topography of the patients face. The data were imported into a CAD package and used as a guide to create a bespoke eye cover. The final design was 3D printed in a biocompatible material for use by the patient.ResultsThe scan, modelling, and printing of the bespoke cover was completed successfully in less than 72 hours.Conclusion3D printing offers a method to create bespoke solutions for patients in palliative care to meet rare and difficult clinical challenges.
BackgroundThree-dimensional printing (3DP) enables the production of highly customised, cost-efficient devices in a relatively short time, which can be particularly valuable to clinicians treating patients with palliative care intent who are in need of timely and effective solutions in the management of their patients’ specific needs, including the relief of distressing symptoms.MethodFour online databases were searched for articles published by December 2020 that described studies using 3DP in palliative care. The fields of application, and the relevant clinical and technological data were extracted and analysed.ResultsThirty studies were reviewed, describing 36 medical devices, including anatomical models, endoluminal stents, navigation guides, obturators, epitheses, endoprostheses and others. Two-thirds of the studies were published after the year 2017. The main reason for using 3DP was the difficulty of producing customised devices with traditional methods. Eleven papers described proof-of-concept studies that did not involve human testing. For those devices that were tested on patients, favourable clinical outcomes were reported in general, and treatment with the use of 3DP was deemed superior to conventional clinical approaches. The most commonly employed 3DP technologies were fused filament fabrication with acrylonitrile butadiene styrene and stereolithography or material jetting with various types of photopolymer resin.ConclusionRecently, there has been a considerable increase in the application of 3DP to produce medical devices and bespoke solutions in the delivery of treatments with palliative care intent. 3DP was found successful in overcoming difficulties with conventional approaches and in treating medical conditions requiring highly customised solutions.
these interventions has been demonstrated. These audits will continue on a regular basis to ensure maintenance of these standards, and improvement where necessary. A further audit of response to PCOC assessments will be conducted.
Due to the heterogenous nature of the palliative medicine patient population, assessment of benefit, and thus choice of appropriate patient for consideration of transfusion, can be challenging. This can be confounded by the use of both liberal and restrictive transfusion thresholds. The multifactorial nature of many symptoms of anaemia, particularly in patients with advanced malignancy, can further complicate. As such, there is a paucity of data supporting the subjective, objective and clinical benefit of red cell transfusion in the palliative medicine setting. This narrative review summarises the research and evidence surrounding the benefits of red cell transfusion, with a particular emphasis on the oncological, haematological and palliative medicine population. There is a lack of a validated, reproducible patient-reported outcome measures (PROM) to assess response to red cell transfusions in the palliative medicine population with outcome measures varying from objective improvement in haemoglobin level post-transfusion, to subjective response in primary symptom(s). Further investigation is required regarding the development of effective PROMs assessing response to red cell transfusion in the palliative medicine population, to ensure judicious use of this scarce and valuable resource.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.