Plastic pollution is a pervasive and growing problem. To estimate the effectiveness of interventions to reduce plastic pollution, we modeled stocks and flows of municipal solid waste and four sources of microplastics through the global plastic system for five scenarios between 2016 and 2040. Implementing all feasible interventions reduced plastic pollution by 40% from 2016 rates and 78% relative to ‘business as usual’ in 2040. Even with immediate and concerted action, 710 million metric tons of plastic waste cumulatively entered aquatic and terrestrial ecosystems. To avoid a massive build-up of plastic in the environment, coordinated global action is urgently needed to reduce plastic consumption, increase rates of reuse, waste collection and recycling, expand safe disposal systems and accelerate innovation in the plastic value chain.

Large quantities of mismanaged plastic waste threaten the health and wellbeing of billions worldwide, particularly in low-and middleincome countries where waste management capacity is being outstripped by increasing levels of consumption and plastic waste generation. One of the main self-management strategies adopted by 2 billion people who have no waste collection service, is to burn their discarded plastic in open, uncontrolled fires. While this strategy provides many benefits, including mass and volume reduction, it is a form of plastic pollution that results in the release of chemical substances and particles that may pose serious risks to public health and the environment. We followed adapted PRISMA guidelines to select and review 20 publications that provide evidence on potential harm to human health from open burning plastic waste, arranging evidence into eight groups of substance emissions: brominated flame retardants; phthalates; potentially toxic elements; dioxins and related compounds; bisphenol A; particulate matter; and polycyclic aromatic hydrocarbons. We semiquantitatively assessed 18 hazard−pathway−receptor combination scenarios to provide an indication of the relative harm of these emissions so that they could be ranked, compared and considered in future research agenda. This assessment overwhelmingly indicated a high risk of harm to waste pickers, a large group of 11 million informal entrepreneurs who work closely with waste, delivering a circular economy but often without protective equipment or a structured, safe system of work. Though the risk to human health from open burning emissions is high, this remains a substantially under-researched topic.

Increasing aspirations to develop a circular economy for waste plastics will result in an expansion of the global plastics reprocessing sector over the coming decades. Here we focus on two critical challenges within the value chain that as a result of such increased circularity may exacerbate existing issues for occupational and public health (1): Legacy contamination in secondary plastics, addressing the risk of materials and substances being inherited from the previous use and carried through into new products when the material enters its subsequent use phase; and challenge (2): Extrusion of secondary plastics in reprocessing, an end process of conventional mechanical recycling of plastics, involving heating secondary plastics under pressure until they melt and can be formed into new products. Via a systematic review (PRISMA guidelines, adapted), we considered over 4,000 sources of information, refined and consolidated into 20 relevant sources, which were critically assessed. We also derive prevalent risk scenarios of hazard-pathway-receptor combinations, subsequently being ranked. Our critical analysis highlights that despite stringent regulation, industrial diligence and enforcement, occasionally small amounts of potentially hazardous substances are able to pass through these safeguards and re-enter in the new product cycle. Although many are present at concentrations unlikely to pose a serious and imminent threat, their existence may be an indication of a wider or possibly increasing challenge of pollution dispersion, as the plastics reprocessing sector proliferates. But, in the Global South context, such controls may not be in place. Several studies showed emission control by passive ventilation, through open doors and windows followed by dilution and dispersion in the atmosphere, resulting in increased occupational exposure. It is recommended that further investigations are undertaken to establish the scale and magnitude of such phenomena, especially given the limited evidence base, with results informing improved future risk management protocols of a circular economy for plastics.

Over the coming decades, a large additional mass of plastic waste will become available for recycling, as efforts increase to reduce plastic pollution and facilitate a circular economy. New infrastructure will need to be developed, yet the processes and systems chosen should not result in adverse effects on human health and the environment. Here, we present a rapid review and critical semi-quantitative assessment of the potential risks posed by eight approaches to recovering value during the resource recovery phase from post-consumer plastic packaging waste collected and separated with the purported intention of recycling. The focus is on the Global South, where there are more chances that high risk processes could be run below standards of safe operation. Results indicate that under non-idealised operational conditions, mechanical reprocessing is the least impactful on the environment and therefore most appropriate for implementation in developing countries. Processes known as ‘chemical recycling’ are hard to assess due to lack of real-world process data. Given their lack of maturity and potential for risk to human health and the environment (handling of potentially hazardous substances under pressure and heat), it is unlikely they will make a useful addition to the circular economy in the Global South in the near future. Inevitably, increasing circular economy activity will require expansion towards targeting flexible, multi-material and multilayer products, for which mechanical recycling has well-established limitations. Our comparative risk overview indicates major barriers to changing resource recovery mode from the already dominant mechanical recycling mode towards other nascent or energetic recovery approaches.

No abstract

No abstract

Despite the relatively benign characteristics of construction and demolition waste, its mismanagement can result in considerable harm to human health for 200 million workers and those who live and work in proximity to construction and demolition activities. The high number of workers classified as informal, results in a large unregulated and vulnerable workforce at a high risk of exposure to hazards. We focused a systematic scoping review (PRISMA-ScR) on evidence associating construction and demolition waste with hazards and risks in low- and middle-income countries. We reviewed more than 3,000 publications, narrowed to 49 key sources. Hazard-pathway-receptor scenarios/combinations were formulated, enabling indicative ranking and comparison of the relative harm caused to different groups. Though the evidential basis is sparse, there is a strong indication that the combustible fraction of construction and demolition waste is disposed of by open burning in many low- and middle-income countries, including increasing quantities of high chloride-content PVC; risking exposure to dioxins and related compounds. A long-standing and well-known hazard, asbestos, continues to represent a health threat throughout the world, claiming 250,000 lives per annum despite being banned in most countries. In the coming decades, it is anticipated that more than half of all deaths from asbestos will take place in India, where it is still sold. Comparatively, the highest risks from construction and demolition waste exist in low- and middle-income countries where attention to risk mitigation and control is needed.

No abstract