Composite materials have emerged as promising materials in applications where low weight and high strengths are desired. Aerospace industry has been using composite materials for past several decades exploiting their characteristics of high strength to weight ratio over conventional homogenous materials. To provide a wider selection of materials for design optimization, and to develop lighter and stronger vehicles, automobile industries have been exploring the use of composites for a variety of components, assemblies, and structures. Composite materials offer an attractive alternate to traditional metals as designers have greater flexibility to optimize material and structural shapes according to functional requirements. However, any automotive structure or part constructed from composite materials must meet or exceed crashworthiness standards such as Federal Motor Vehicle Safety Standard (FMVSS) 208. Therefore, for a composite structure designed to support the integrity of the automotive structure and provide impact protection, it is imperative to understand the energy absorption characteristics of the candidate composite structures. In the present study, a detailed finite element analysis is presented to evaluate the energy absorbing characteristics of a carbon fiber reinforced polymer composite lower rail, a critical impact mitigation component in automotive chassis. For purposes of comparison, the analysis is repeated with equivalent aluminum and steel lower rails. The study was conducted using ABAQUS CZone module, finite element analysis software. The rail had a cross-sectional dimension of 62 mm (for each side), length of 457.2 mm, and a wall thickness of 3.016 mm. These values were extracted from automobile chassis manufacturer’s catalog. The rail was impacted by a rigid plate of mass 1 tonne (to mimic a vehicle of 1000 Kg gross weight) with an impact velocity of 35 mph (15646.4 mm/s), which is 5 mph over the FMVSS 208 standard, along its axis. The simulation results show that the composite rail crushes in a continuous manner under impact load (in contrast to a folding collapse deformation mode in aluminum and steel rails) which generates force-displacement curve with invariable crushing reactive force for the most part of the crushing stroke. The energy curves obtained from reactive force-displacement graphs show that the composite rail absorbs 240% and 231% more energy per unit mass as compared to aluminum and steel rails. This shows a significant performance enhancement over equivalent traditional metal (aluminum and steel) structures and suggests that composite materials in conjunction with cellular materials/configurations have a tremendous potential to improve crashworthiness of automobiles while offering opportunities of substantial weight reductions.
This article presents a new and detailed study on the characterization of material properties of AA 6063 T6 and T7 tempers and their effects on crushing response and energy absorption in a novel tubular structural member for design for crashworthiness purposes. These properties were characterized into three regions: the elastic, the uniform plastic, and the ductile damage regions. Standard tensile tests were used to ascertain the elastic and plastic properties up until uniaxial instability. To characterize the ductile damage, a phenomenological model was employed using a decaying exponential fit of triaxial stresses versus equivalent plastic strain data obtained from finite element and experimental models of flat notched specimens. A new theoretical model for predicting the crushing behavior of the novel cross tube was developed. A numerical, experimental, and theoretical comparison of the mean crushing force for novel extruded crossshaped specimens of both tempers was also presented. The results of this study provide valuable insights into the applications of T6 and T7 tempers of aluminum as energy-absorbing materials for novel cross-shaped structural members for improved crashworthiness.
Axial members are commonly used in automotive structures and are responsible for absorbing significant portion of impact energy in the event of an accident. This study was conducted to investigate the effects of inclusion of functionally graded cellular structures in thin walled members under compressive axial loading. A compact functionally graded cellular structure was introduced inside a 352 mm long square tube with side length and wall thickness of 74 mm and 3.048 mm, respectively. The tube wall material was aluminum. The cellular structure’s geometry was observed in the cross-section of a banana peel that has a specific graded cellular packing in a confined space. This packing enables the peel to protect the internal soft core from external impacts. The same cellular pattern was used to construct the structure in present study. The study was conducted using non-linear finite element analysis in ABAQUS. The hybrid structure (tube and graded cellular structure) was fixed on one side and on the other (free end) side, was struck by a rigid mass of 300 Kg travelling at a velocity of 35 mph (15.64 m/s) along the axis of the square tube and perpendicular to the in-plane direction of the graded cellular structure. The tube and cell walls were discretized using reduced integration, hourglass control, 4 nodes, and hexahedral shell elements. The impact plate was modeled with 4 node rigid shell elements. General contact conditions were applied to define surface interaction among graded structure, square tube, and rigid plate. The parameters governing the energy absorbing characteristics such as deformation or collapsing modes, crushing/ reactive force, and energy curves, were evaluated. The results showed that the inclusion of graded cellular structure increased the energy absorption capacity of the square tube by 41.06%. The graded structure underwent progressive stepwise, layer by layer, crushing mode and provided lateral stability to the square tube thus delaying local tube wall collapse and promoting outward convex localized folds on the tube’s periphery as compared to highly localized and compact deformation modes that are typically observed in an empty square tube under axial compressive loading. The variation in deformation mode, large contact areas, presence of graded cellular structure resulted in enhanced stiffness of the hybrid structure, and therefore, high energy absorption by the structure. The results of this preliminary study show a potential of functionally graded cellular materials to significantly improve the energy absorbing capacities of thin walled members under axial loading by altering member’s crushing deformation modes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.