Although the progress of short wavelength VCSEL-based parallel optical links has been published by several groups [l][2], the use of highly reliable long wavelength LEDs has recently been investigated as a viable option for applications requiring 622 Mb/s or less. This paper presents an LED based parallel optical link using a unique method for optical modeling to improve coupling efficiency between light sources and waveguides. Figure 1 shows the schematic of the LED based parallel optical link. There are five transmitter channels (LED array) and five receiver channels (PIN array). Polyguide" optical waveguides[3] with 45" mirrors are used to couple light between the arrays and the ribbon fiber through an MT style ferrule connector. An optical model utilizing graphical ray path representation, power tracking of each ray, and accurate modeling of the LED emission has been developed to investigate and improve the coupling efficiency [4]. Figure 2 shows three-dimensional and cross-sectional views of coupled rays determined by this model. The integral micro-lens of the LED used in this experiment was characterized using a noncontact profilometer to provide accurate verification of the model. The software generates 160,000 rays emanating from the LED heterojunction active area disk with a Lambertian distribution. Ray/surface intersection points and direction cosines are calculated for each surface. Refracted or reflected angle, Fresnel reflection, and linear absorption are then calculated along each ray at each surface progressively. The coupling efficiency is calculated as the ratio of the power sum of the guided rays to the total number of rays emitted from the LED. The entire calculation is repeated for each off axis position of the LED to obtain longitudinal and lateral coupling curves . Figures 3, 4, and 5 compare the simulated and actual LED to Polyguide coupling versus offset in z, x, and y axes respectively. The average difference between experimental and theoretical values is 2.2%. Figure 6 shows the relative coupled power measured as a function of x and y axes offsets. A preliminary study shows that the total power coupled into 62.5 pm fiber is approximately -18.5 dBm including Polyguide and connector losses. Combined with typical receiver performance, the link is suitable for transmission lengths on the order of several hundred meters. This work is based on LEDs which have a measured activation energy of 0.9 eV and a qualified -1.5 dB MTTF of 1.2 x lo1' hours (A= .08 FITS) at 25 "C. These devices were operated at 155 Mb/s but are capable of 270 Mb/s operation.Additionally, LEDs operating at 622 Mb/s have been demonstrated[5] and will be used in future versions of this link.In summary, a prototype parallel optical data link based on LEDs and planar waveguide technology has been developed, modeled, and characterized. Close agreement between the theoretical values calculated from the model and the measured values has been achieved. This approach provides a practical alternative for many fiber communication a...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.