No abstract

No abstract

The work presents the assessment of a low emissions premixer/swirl burner configuration utilizing lean stratified fuel preparation. An axisymmetric, single-or double-cavity premixer, formed along one, two, or three concentric disks promotes propane-air premixing and supplies the combustion zone at the afterbody disk recirculation with a radial equivalence ratio gradient. The burner assemblies are operated with a swirl co-flow to study the interaction of the recirculating stratified flame with the surrounding swirl. A number of lean and ultra-lean flames operated either with a plane disk stabilizer or with one or two premixing cavity arrangements were evaluated over a range of inlet mixture conditions. The influence of the variation of the imposed swirl was studied for constant fuel injections. Measurements of turbulent velocities, temperatures, OH * chemiluminescence and gas analysis provided information on the performance of each burner set up. Comparisons with Large Eddy Simulations, performed with an 11-step global chemistry, illustrated the flame front interaction with the vortex formation region under the influence of the variable inlet mixture stratifications. The combined effort contributed to the identification of optimum configurations in terms of fuel consumption and pollutants emissions and to the delineation of important controlling parameters and limiting fuel-air mixing conditions.

The work presents comparisons of the flame stabilization characteristics of axisymmetric disk and 2D slender bluff-body burner configurations, operating with inlet mixture stratification, under ultralean conditions. A double cavity propane air premixer formed along three concentric disks, supplied with a radial equivalence ratio gradient the afterbody disk recirculation, where the first flame configuration is stabilized. Planar fuel injection along the center plane of theleading faceof a slender square cylinder against the approach cross-flow results in a stratified flame configuration stabilized alongside the wake formation region in the second setup. Measurements of velocities, temperatures,OH∗andCH∗chemiluminescence, local extinction criteria, and large-eddy simulations are employed to examine a range of ultralean and close to extinction flame conditions. The variations of the reacting front disposition within these diverse reacting wake topologies, the effect of the successive suppression of heat release on the near flame region characteristics, and the reemergence of large-scale vortical activity on approach to lean blowoff (LBO) are investigated. The cross-correlation of the performance of these two popular flame holders that are at the opposite ends of current applications might offer helpful insights into more effective control measures for expanding the operational margin of a wider range of stabilization configurations.

The importance of forest environment in the perspective of the biodiversity as well as from the economic resources which forests enclose, is more than evident. Any threat posed to this critical component of the environment should be identified and attacked through the use of the most efficient available technological means. Early warning and immediate response to a fire event are critical in avoiding great environmental damages. Fire risk assessment, reliable detection and localization of fire as well as motion planning, constitute the most vital ingredients of a fire protection system. In this chapter, we review the evolution of the forest fire protection systems and emphasize on open issues and the improvements that can be achieved using artificial intelligence technology. We start our tour from the pillars which were for a long time period, the only possible method to oversee the forest fires. Then, we will proceed to the exploration of early AI systems and will end-up with nowadays systems that might receive multimodal data from satellites, optical and thermal sensors, smart phones and UAVs and use techniques that cover the spectrum from early signal processing algorithms to latest deep learning-based ones to achieving the ultimate goal.

No abstract

No abstract

No abstract