The northern clingfish, Gobiesox maeandricus, is able to adhere to slippery, fouled and irregular surfaces in the marine intertidal environment. We have found that the fish can adhere equally well to surfaces with a broad range of surface roughness, from the finest sandpaper (R a ¼ 15 mm) to textures suitable for removing finish from flooring (R a ¼ 269 mm). The fishes outperform manmade suction cups, which only adhere to the smoothest surfaces. The adhesive forces of clingfish correspond to pressures 0.2-0.5 atm below ambient and are 80-230 times the body weight of the fish. The tenacity appears related to hierarchically structured microvilli around the edges of the adhesive disc that are similar in size and aspect ratio to the setae found on the feet of geckoes, spiders and insects. This points to a possible biomimetic solution to the problem of reversibly adhering to irregular, submerged surfaces.

Remoras of the ray-finned fish family Echeneidae have the remarkable ability to attach to diverse marine animals using a highly modified dorsal fin that forms an adhesive disc, which enables hitchhiking on fast-swimming hosts despite high magnitudes of fluid shear. We present the design of a biologically analogous, multimaterial biomimetic remora disc based on detailed morphological and kinematic investigations of the slender sharksucker (Echeneis naucrates). We used multimaterial three-dimensional printing techniques to fabricate the main disc structure whose stiffness spans three orders of magnitude. To incorporate structures that mimic the functionality of the remora lamellae, we fabricated carbon fiber spinules (270 m base diameter) using laser machining techniques and attached them to soft actuator-controlled lamellae. Our biomimetic prototype can attach to different surfaces and generate considerable pull-off force-up to 340 times the weight of the disc prototype. The rigid spinules and soft material overlaying the lamellae engage with the surface when rotated, just like the discs of live remoras. The biomimetic kinematics result in significantly enhanced frictional forces across the disc on substrates of different roughness. Using our prototype, we have designed an underwater robot capable of strong adhesion and hitchhiking on a variety of surfaces (including smooth, rough, and compliant surfaces, as well as shark skin). Our results demonstrate that there is promise for the development of high-performance bioinspired robotic systems that may be used in a number of applications based on an understanding of the adhesive mechanisms used by remoras.

Tuna and related scombrid fishes are high-performance swimmers that often operate at high frequencies, especially during behaviors such as escaping from predators or catching prey. This contrasts with most fish-like robotic systems that typically operate at low frequencies (< 2 hertz). To explore the high-frequency fish swimming performance space, we designed and tested a new platform based on yellowfin tuna (Thunnus albacares) and Atlantic mackerel (Scomber scombrus). Body kinematics, speed, and power were measured at increasing tail beat frequencies to quantify swimming performance and to study flow fields generated by the tail. Experimental analyses of freely swimming tuna and mackerel allow comparison with the tuna-like robotic system. The Tunabot (255 millimeters long) can achieve a maximum tail beat frequency of 15 hertz, which corresponds to a swimming speed of 4.0 body lengths per second. Comparison of midline kinematics between scombrid fish and the Tunabot shows good agreement over a wide range of frequencies, with the biggest discrepancy occurring at the caudal fin, primarily due to the rigid propulsor used in the robotic model. As frequency increases, cost of transport (COT) follows a fish-like U-shaped response with a minimum at ~1.6 body lengths per second. The Tunabot has a range of ~9.1 kilometers if it swims at 0.4 meter per second or ~4.2 kilometers at 1.0 meter per second, assuming a 10–watt-hour battery pack. These results highlight the capabilities of high-frequency biological swimming and lay the foundation to explore a fish-like performance space for bio-inspired underwater vehicles.

Northern clingfish use a ventral suction disc to stick to rough substrates in the intertidal zone. Bacteria, algae and invertebrates grow on these surfaces (fouling) and change the surface properties of the primary substrate, and therefore the attachment conditions for benthic organisms. In this study, we investigate the influence of fouling and surface roughness on the adhesive strength of northern clingfish, Gobiesox maeandricus. We measured clingfish tenacity on unfouled and fouled substrates over four surface roughnesses. We exposed surfaces for 6 weeks in the Pacific Ocean, until they were covered with periphyton. Clingfish tenacity is equivalent on both fouled and unfouled smooth substrates; however, tenacity on fouled rough surfaces is less compared with tenacity on unfouled ones. We hypothesize that parts of biofilm may act as a lubricant and decrease friction of the disc margin, thereby making disc margins slip inwards and fail at lower tenacities. Nevertheless, even on fouled surfaces the adhesive forces are approximately 150 times the body weight of the fish. To identify the upper threshold of surface roughness the fish can cling to, we tested seven unfouled substrates of increasing surface roughness. The threshold roughness at which northern clingfish failed increased with specimen size. We hypothesize that because of the elastic properties of the disc margin, a larger disc can adapt to larger surface irregularities. The largest specimens (length 10-12 cm) were able to cling to surfaces with 2-4 mm grain size. The fish can attach to surfaces with roughness between 2 and 9% of the suction disc width.