Ecofriendly, ecoefficient and sustainable civil engineering work has been research with emphasis on adapting the byproducts of solid waste recycling and reuse to achieving infrastructural activities with low or zero carbon emission. The direction combustion model, the solid waste incinerator caustic soda oxides of carbon entrapment model (SWI-NaOH-OCEM) developed by this research has achieved a zero carbon release. This research adopted the literature search method to put together research results of previous works relevant to the aim of this present work. It has been shown that CO and CO2 emissions can be contained during the derivation of alternative or supplementary cementing materials used in the replacement of ordinary Portland cement in civil engineering works. In the overall assessment of the present review work has left the environment free of the hazards of CO and CO2 emissions. It was shown that these supplementary cementing materials derived from solid wastes improve the engineering properties of treated soft clay and expansive soils, concrete, and asphalt. Bio-peels, another form solid waste has been established as a good detoxificant used in treating wastewater. It has been shown that solid waste recycling and reuse is a hub to achieving ecofriendly, ecoefficient and sustainable infrastructural development on the global scale.

No abstract

No abstract

No abstract

No abstract

Extreme vertex design (EVD) has been adapted to be used in the modeling of the behavior of mixture experiments in civil engineering. This method has been in use since the 1970s and has be prevalent in the field of medical science. Various other methods of design of experiments have been used in engineering but neither has EVD being used particularly in civil engineering. This review is presented to serve as a hub or guide for subsequent exercise where concrete production, asphalt production or modification, soils stabilization and concrete improvement or water treatment would be studied with the help EVD. Its ability to fix design points and centroids has been reviewed in this work. EVD operates with various algorithms and depends on the order or condition of problems to be solved. The XVERT algorithm working on Minitab and Design Expert platform was adopted in this review work because of its efficiency in handling quadratic model problems like the four cases reviewed in the present work. From the four special cases, it can be asserted that there is a confidence in the use of EVD to develop the constraints, design the experimental factor space, design the mix proportions, and validate the models resulting from these procedures after experimental specimens are tested to determine the responses.

No abstract

No abstract