Purpose The purpose of this paper is to present a method for assisting micro and small companies of the industrial sector with the adoption of Lean practices. Design/methodology/approach The paper outlines the method construction steps, which used a design science research approach. Findings This research led to the structuring of a method for implementing Lean Manufacturing tools in micro and small companies of the industrial sector. The developed method contributed to the knowledge in Lean Manufacturing by systematizing its tools in a heuristic approach that can be applied to an operation using overall equipment effectiveness (OEE) as a guiding indicator. Practical implications This method can be used to guide the implementation of Lean tools in SMEs industries. Originality/value The originality of this paper lies in the adoption of an operation-focused approach only (rather than an approach that begins with the mapping of an entire process) and the use of OEE as the basis for prioritization of improvements to be performed and operational control.

Purpose The purpose of this paper is to identify the key critical factors that affect the success of Business Process Management (BPM) implementations, considering the literature and experts practical experience. Design/methodology/approach A systematic literature review (SLR) was conducted, and 25 articles from 12 different countries were selected and analyzed. In addition, through a survey, 113 BPM experts were consulted in order to assist in the evaluation of critical success factors (CSFs) initially identified in the bibliography. Findings All CSFs identified in the literature were accepted as real critical factors according to the tacit knowledge of the experts. Thus, the factors identified in the literature and approved to a large extent by the experts can serve as a basis for organizations and professionals who want to implement BPM to know of their existence, to relate to them, to control them and thus to potentiate the success of the implementation. Originality/value The construction of the theoretical framework based on SLR on BPM is a contribution to the bibliographic database. Another contribution is the identification and synthesis of the CSFs most cited by different authors from 12 different countries and its analysis by professionals on BPM.

Purpose – The purpose of this paper is to present a case of integration between the processes modeling by using the Value Stream Mapping (VSM) and the Thinking Process of the Theory of Constraints (TP-TOC) through the analysis of productive processes of an organization, indicating the complementary aspects between them and their benefits to the organization. Design/methodology/approach – The paper uses a company of the Brazilian automotive industry as the administering site. The research began by identifying the organization's processes and choice of a family of products to model according to the VSM approach. The integrated view between the losses in the process (VSM) and the unwanted effects of the adding value process were analyzed by using the Current Reality Tree. After the analysis, different improvement procedures are proposed based on the lean principles. Finally, a work plan is presented based on the previous steps aiming to achieve the proposed future state. Findings – The analysis of this case helps to understand and identify the causes of the current problems in the processes studied, providing an integrated view between the losses in the process and the prioritization of steps for the elimination of such losses. The approach in its initial administration was robust and the solution steps were promising. By integrating these approaches, it was possible to verify improvement opportunities by identifying the losses and the basic causes that sustain the unwanted effects in the processes at the same time. Originality/value – The study proposes an approach that enables a systematic and systemic analysis of the processes at organizations through the combined use of process modeling through the VSM and TP-TOC. Simultaneously, the losses in the processes and the unwanted effects are identified. Thus, through the construction of an effect-cause-effect robust logic, both losses in particular and the unwanted effects in general can be prioritized in order to maximize the improvement efforts in the processes.

Purpose Research in business processes has been developed around a disciplinary approach toward the production of traditional knowledge, known as Mode 1. The problems studied with this approach are solved in a context in which academic knowledge prevails, with no major concerns regarding its practical applicability. Thus, the purpose of this paper is to propose a structure for knowledge production based on Mode 2 for business process researches. Design/methodology/approach A bibliometric research was conducted to define and conceptualize the classes of disciplinary problems, by assessing the years 2007-2012 of the Business Process Management Journal publications. Findings A framework for the Mode 2 knowledge production was proposed in the development of research in business process and conceptualized classes of problems related to this issue. Research limitations/implications This work was carried out with specific focus on research in business process, so the defined classes of problems cannot be generalized. Originality/value The studies identified by this research are in the form of a disciplinary approach toward the production of traditional knowledge, known as Mode 1. This paper aims to fill the gap of a transdisciplinary production of knowledge and practical application, known as Mode 2 in the context of business process.

A necessidade de eliminar desperdícios em áreas administrativas amplifica-se à medida que aumenta a competitividade nos setores, pressionando assim a redução de custos e despesas fixas. Neste contexto, além de mostrarem-se relevantes para as operações diretas, os conceitos e ferramentas Lean também ganham importância no escritório e em áreas de apoio. Apesar disto, os métodos disponíveis para a utilização do Lean em áreas administrativas carecem de integração com técnicas consolidadas pela literatura em Gerenciamento de Processos de Negócio. Frente a necessidade das organizações em eliminar desperdícios, e às lacunas identificadas na literatura existente sobre Lean Office, o presente artigo apresenta a proposição de um método para a implantação do Lean em áreas administrativas, incorporando o uso de técnicas de Gerenciamento de Processos. Além disto, este trabalho apresenta a aplicação do método no Sindicato das Indústrias Metalúrgica, Mecânica e de Material Elétrico e Eletrônico de São Leopoldo - SINDIMETAL. Para este objetivo, o trabalho revisa os conceitos Lean e de Gerenciamento de Processos de Negócio, utilizando como método de pesquisa a Design Science Research. Por fim são discutidas implicações a partir destas proposições bem como perspectivas para o desenvolvimento do Lean como alternativa para melhoria em operações administrativas.