We report the vibrational and optical properties of the 'defect' perovskites Cs 2 SnX 6 (X = Cl, Br, I) as well as their use as hole-transporting materials (HTMs) in solar cells. All three air-stable compounds were characterized using powder X-ray diffraction and Rietveld refinement. Far-IR reflectance, Raman, and UV−vis spectroscopy as well as electronic band structure calculations show that the compounds are direct band gap semiconductors with a pronounced effect of the halogen atom on the size of the energy gap and the vibrational frequencies. Scanning electron microscopy and atomic force microscopy confirmed that the morphology of the perovskite films deposited from N,N-dimethylformamide solutions on TiO 2 substrates also strongly depends on the chemical composition of the materials. The Cs 2 SnX 6 perovskites were introduced as hole-transporting materials in dye-sensitized solar cells, based on mesoporous titania electrodes sensitized with various organic and metal−organic dyes. The solar cells based on Cs 2 SnI 6 HTM and the Z907 dye performed best with a maximum power conversion efficiency of 4.23% at 1 sun illumination. The higher performance of Cs 2 SnI 6 is attributed to efficient charge transport in the bulk material and hole extraction at the perovskite-Pt interface, as evidenced by electrochemical impedance spectroscopy.

Solution-processed organic-inorganic halide perovskites are currently established as the hottest area of interest in the world of photovoltaics, ensuring low manufacturing cost and high conversion efficiencies. Even though various fabrication/deposition approaches and device architectures have been tested, researchers quickly realized that the key for the excellent solar cell operation was the quality of the crystallization of the perovskite film, employed to assure efficient photogeneration of carriers, charge separation and transport of the separated carriers at the contacts. One of the most typical methods in chemistry to crystallize a material is anti-solvent precipitation. Indeed, this classical precipitation method worked really well for the growth of single crystals of perovskite. Fortunately, the method was also effective for the preparation of perovskite films by adopting an anti-solvent dripping technique during spin-coating the perovskite precursor solution on the substrate. With this, polycrystalline perovskite films with pure and stable crystal phases accompanied with excellent surface coverage were prepared, leading to highly reproducible efficiencies close to 22%. In this review, we discuss recent results on highly efficient solar cells, obtained by the anti-solvent dripping method, always in the presence of Lewis base adducts of lead(II) iodide. We present all the anti-solvents that can be used and what is the impact of them on device efficiencies. Finally, we analyze the critical challenges that currently limit the efficacy/reproducibility of this crystallization method and propose prospects for future directions.

No abstract

No abstract

In this work, the dye-sensitization approach was used to optimize the compact layer/perovskite interface in planar perovskite solar cells (PSCs). The chemisorption of the triphenylamine-based metal-free organic (E)-3-(5-(4-(bis(2′,4′-dibutoxy-[1,1′-biphenyl]-4yl)amino)phenyl)thiophen-2-yl)-2-cyanoacrylic acid (D35) sensitizer via a bidentate anchor group on the titania surface resulted in both enhanced electron transfer and controlled growth of the top MAPbI 3 perovskite layer. This modification led to planar PSC devices presenting significantly improved performance and increased stability. Using the Spiro-OMeTAD molecular hole conductor, stabilized output power conversion efficiencies (PCEs) of 13% were obtained for cells with titania sensitization, clearly outperforming those of cells without D35. This investigation gives new insights into how the molecular engineering via dye sensitization of the functional interfaces affects the performance in PSCs.

No abstract

No abstract

No abstract