Acid gases (e.g., NO x and SO x ), commonly found in complex chemical and petrochemical streams, require material development for their selective adsorption and removal. Here, we report the NO x adsorption properties in a family of rare earth (RE) metal–organic frameworks (MOFs) materials. Fundamental understanding of the structure–property relationship of NO x adsorption in the RE-DOBDC materials platform was sought via a combined experimental and molecular modeling study. No structural change was noted following humid NO x exposure. Density functional theory (DFT) simulations indicated that H2O has a stronger affinity to bind with the metal center than NO2, while NO2 preferentially binds with the DOBDC ligands. Further modeling results indicate no change in binding energy across the RE elements investigated. Also, stabilization of the NO2 and H2O molecules following adsorption was noted, predicted to be due to hydrogen bonding between the framework ligands and the molecules and nanoconfinement within the MOF structure. This interaction also caused distinct changes in emission spectra, identified experimentally. Calculations indicated that this is due to the adsorption of NO2 molecules onto the DOBDC ligand altering the electronic transitions and the resulting photoluminescent properties, a feature that has potential applications in future sensing technologies.
Herein, we describe a novel multifunctional metal-organic framework (MOF) materials platform that displays both porosity and tunable emission properties as a function of the metal identity (Eu, Nd, and tuned compositions of Nd/Yb). Their emission collectively spans the deep red to near-infrared (NIR) spectral region (∼614-1350 nm), which is highly relevant for in vivo bioimaging. These new materials meet important prerequisites as relevant to biological processes: they are minimally toxic to living cells and retain structural integrity in water and phosphate-buffered saline. To assess their viability as optical bioimaging agents, we successfully synthesized the nanoscale Eu analog as a proof-of-concept system in this series. In vitro studies show that it is cell-permeable in individual RAW 264.7 mouse macrophage and HeLa human cervical cancer tissue culture cells. The efficient discrimination between the Eu emission and cell autofluorescence was achieved with hyperspectral confocal fluorescence microscopy, used here for the first time to characterize MOF materials. Importantly, this is the first report that documents the long-term conservation of the intrinsic emission in live cells of a fluorophore-based MOF to date (up to 48 h). This finding, in conjunction with the materials' very low toxicity, validates the biocompatibility in these systems and qualifies them as promising for use in long-term tracking and biodistribution studies.
Computational screening of metal−organic framework (MOF) materials for selective oxygen adsorption from air is used to identify new sorbents for oxyfuel combustion process feedstock streams. A comprehensive study on the effect of MOF metal chemistry on gas binding energies in two common but structurally disparate MOFs has been undertaken. Dispersioncorrected density functional theory (DFT) methods were used to calculate the oxygen and nitrogen binding energies with each of 14 metals, respectively, substituted into two MOF series, M 2 (dobdc) and M 3 (btc) 2 . The accuracy of DFT methods was validated by comparing trends in binding energy with experimental gas sorption measurements. A periodic trend in oxygen binding energies was found, with greater oxygen binding energies for early transitionmetal-substituted MOFs compared to late transition metal MOFs; this was independent of MOF structural type. The larger binding energies were associated with oxygen binding in a side-on configuration to the metal, with concomitant lengthening of the O−O bond. In contrast, nitrogen binding energies were similar across the transition metal series, regardless of both MOF structural type and metal identity. Taken together, these findings suggest that early transition metal MOFs are best suited to separating oxygen from nitrogen and that the MOF structural type is less important than the metal identity.
Long-term antimicrobial therapies are necessary to treat infections caused by virulent intracellular pathogens, including biothreat agents. Current treatment plans include injectable therapeutics given multiple times daily over a period for up to 8 weeks. Here, we present a metal−organic framework (MOF), zeolitic imidazolate framework-8 (ZIF-8), as a robust platform to support the sustained release of ceftazidime, an important antimicrobial agent for many critical bacterial infections. Detailed material characterization confirms the successful encapsulation of ceftazidime within the ZIF-8 matrix, indicating sustained drug release for up to a week. The antibacterial properties of ceftazidime@ZIF-8 particles were confirmed against Escherichia coli, chosen here as a representative of Gram-negative bacteria infection model in a proof-of-concept study. Further, we showed that this material system is compatible with macrophage and lung epithelial cell lines, relevant targets for antibacterial therapy for pulmonary and intracellular infections. A promising methodology to enhance the treatment of intracellular infections is to deliver the antibiotic cargo intracellularly. Importantly, this is the first study to unequivocally demonstrate direct MOF particle internalization using confocal microscopy via 3D reconstructions of z-stacks, taking advantage of the intrinsic emission properties of ZIF-8. This is an important development as it circumvents the need to use any staining dyes and addresses current methodology limitations concerning false impression of cargo uptake in the event of the carrier particle breakdown within biological media.
Here, we describe the homogeneous substitution of Mn, Fe, and Co at various levels into a prototypical metal−organic framework (MOF), namely Cu-BTC (HKUST-1), and the effect of that substitution on preferential gas sorption. Using a combination of density functional theory (DFT) calculations, postsynthetic metal substitutions, materials characterization, and gas sorption testing, we demonstrate that the identity of the metal ion has a quantifiable effect on their oxygen and nitrogen sorption properties at cryogenic temperatures. An excellent correlation is found between O 2 /N 2 selectivities determined experimentally at 77 K and the difference in O 2 and N 2 binding energies calculated from DFT modeling data: Mn > Fe ≈ Co ≫ Cu. Room temperature gas sorption studies were also performed and correlated with metal substitution. The Fe-exchanged sample shows a significantly higher nitrogen isosteric heat of adsorption at temperatures close to ambient conditions (273−298 K) as compared to all other metals studied, indicative of favorable interactions between N 2 and coordinatively unsaturated Fe metal centers. Interestingly, differences in gas adsorption results at cryogenic and room temperatures are evident; they are explained by comparing experimental results with DFT binding energies (0 K) and room temperature Grand Canonical Monte Carlo simulations.
Nanoporous materials such as metal–organic frameworks (MOFs) have attractive properties for selective capture of chemical warfare agents (CWAs). For obvious reasons, most research on adsorption of CWAs is performed with simulant molecules rather than real agents. This paper examines how effectively common CWA simulants mimic the adsorption properties of sarin and soman. To this end, we perform molecular simulations in the dilute adsorption limit for four simulants [dimethyl methylphosphonate (DMMP), diethyl chlorophosphate (DCP), diisopropyl fluorophosphate, and dimethyl p-nitrophenyl phosphate (DMNP)] and sarin and soman in a set of 2969 MOFs with experimentally known crystal structures. To establish the robustness of the conclusions with respect to the force field used in these simulations, each system was examined with two independent force fields, a “generic” force field and a density functional theory (DFT)-derived force field we established based on extensive dispersion-corrected DFT calculations of adsorption in the well-known MOF UiO-66. Our results show that when judging the performance of adsorbents using the heat of adsorption, DCP and DMMP are the best simulants for the adsorption of sarin, while DMNP is the best simulant for soman. The adsorption properties of DCP or DMMP show a strong correlation with sarin over a range of MOFs, but the correlation between DMNP and soman is considerably weaker. Comparisons of results with both force fields indicate that our main conclusions are robust with respect to the force field used to define adsorbate–MOF interactions.
Here, we introduce a family of metal–organic frameworks (MOFs) whose photoluminescence is tunable through metal and organic ligand substitutions. The compounds in this family are composed of In, In–Eu, or Eu metal centers and organic ligand chromophores. Systematic variations in the metal and organic components resulted in materials with emissions ranging from white to red. The single-component white-light emitter material is made of In, 4,4′,4″-s-triazine-2,4,6-triyl-tribenzoic acid (TTB) and oxalic acid. Red-emitting MOFs composed of Eu metal centers and TTB ligands have a room temperature quantum yield (QY) of 50% and a 48% QY at 150 °C due to reversible thermal quenching. This is the highest quantum yield measured at elevated temperatures reported for this class of materials. The materials are thermally stable, retaining their high QY after heating at 150 °C for several hours. These thermal quenching/stability studies show the potential use of MOFs in devices that operate at elevated temperatures, such as white-light-emitting diodes for solid-state lighting. This is a unique study that correlates the QY, thermal quenching, and thermal stability of MOFs with structural properties.
The adsorption of chemical warfare agents and their simulants by Zr (UiO-66) and rare-earth (Y, UiO-66-DOBDC analog)-based metal−organic frameworks (MOFs) is explored here using density functional theory. In particular, we investigate the role of linker functional group (OH, H) and metal atom identity on the binding energies of organophosphorous compounds. Commonly used cluster approximations for MOF secondary building units and various optimization constraints are compared with three-dimensional periodic results. An in-depth scan of potential binding sites and orientations reveals little effect due to metal identity, whereas the effect of linker functionalization depends on the substrate. This finding strongly suggests that full linkers and functional groups should be included in cluster models. Importantly, defect sites show considerably improved binding of organophosphorous compounds as compared to ideal clusters. Favorable binding is also demonstrated at two additional adsorption sites, ZrOH and μ 3 -OH, that likely play a role in the initial adsorption process. The results presented here portray the importance of including full threedimensional pore structures in the adsorption process of organophosphorous compounds in MOFs; a critical first step in the degradation of these harmful chemicals.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.