Conducting polymer hydrogels represent a unique class of materials that synergizes the advantageous features of hydrogels and organic conductors and have been used in many applications such as bioelectronics and energy storage devices. They are often synthesized by polymerizing conductive polymer monomer within a nonconducting hydrogel matrix, resulting in deterioration of their electrical properties. Here, we report a scalable and versatile synthesis of multifunctional polyaniline (PAni) hydrogel with excellent electronic conductivity and electrochemical properties. With high surface area and three-dimensional porous nanostructures, the PAni hydrogels demonstrated potential as high-performance supercapacitor electrodes with high specific capacitance (∼480 F·g −1 ), unprecedented rate capability, and cycling stability (∼83% capacitance retention after 10,000 cycles). The PAni hydrogels can also function as the active component of glucose oxidase sensors with fast response time (∼0.3 s) and superior sensitivity (∼16.7 μA·mM −1 ). The scalable synthesis and excellent electrode performance of the PAni hydrogel make it an attractive candidate for bioelectronics and future-generation energy storage electrodes.conductive polymer hydrogel | supercapacitors | biosensors H ydrogels are polymeric networks that have a high level of hydration and three-dimensional (3D) microstructures bearing similarities to natural tissues (1, 2). Hydrogels based on conducting polymers [e.g., polythiophene, polyaniline (PAni), and polypyrrole] combine the unique properties of hydrogels with the electrical and optical properties of metals or semiconductors (3-6) thus offering an array of features such as intrinsic 3D microstructured conducting frameworks that promote the transport of charges, ions, and molecules (7). Conducting polymer hydrogels provide an excellent interface between the electronictransporting phase (electrode) and the ionic-transporting phase (electrolyte), between biological and synthetic systems, as well as between soft and hard materials (8). As a result, conducting polymer hydrogels have demonstrated great potential for a broad range of applications from energy storage devices such as biofuel cells and supercapacitors, to molecular and bioelectronics (9) and medical electrodes (8).To date, the synthetic routes toward conducting polymer hydrogels include synthesizing a conducting polymer monomer within a nonconducting hydrogel matrix (8, 9) using multivalent metal ions (Fe 3þ or Mg 2þ ) to crosslink poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) (10, 11) and using nonconducting poly(ethylene glycol) diglycidyl ether, or poly(styrenesulfonate) to crosslink PAni (12, 13); however, nonconducting hydrogel matrix and polymers result in the deterioration of the electrical properties, whereas excessive metal ions may reduce the biocompatibility of hydrogels. Moreover, there have yet been any reports in regard to conductive hydrogels that can be facilely micropatterned, which is important for fabricating hy...

Glucose enzyme biosensors have been shown useful for a range of applications from medical diagnosis, bioprocess monitoring, to beverage industry and environmental monitoring. We present here a highly sensitive glucose enzyme sensor based on Pt nanoparticles (PtNPs)-polyaniline (PAni) hydrogel heterostructures. High-density PtNPs were homogeneously loaded onto the three-dimensional (3D) nanostructured matrix of the PAni hydrogel. The PtNP/PAni hydrogel heterostructure-based glucose sensor synergizes the advantages of both the conducting hydrogel and the nanoparticle catalyst. The porous structure of the PAni hydrogel favored the high density immobilization of the enzyme and the penetration of water-soluble molecules, which helped efficiently catalyze the oxidation of glucose. In addition, the PtNPs catalyzed the decomposition of hydrogen peroxide that was generated during the enzymatic reaction. The transferred charges from these electrochemical processes were efficiently collected by the highly conducting PtNP/PAni hydrogel heterostructures. The glucose enzyme sensor based on this heterostructure exhibited unprecedented sensitivity, as high as 96.1 μA·mM(-1)·cm(-2), with a response time as fast as 3 s, a linear range of 0.01 to 8 mM, and a low detection limit of 0.7 μM.

ZnO-nanorods/graphene heterostructure was synthesized by hydrothermal growth of ZnO nanorods on chemically reduced graphene (CRG) film. The hybrid structure was demonstrated as a biosensor, where direct electron transfer between glucose oxidase (GOD) and electrode was observed. The charge transfer was attributed to the ZnO nanorod wiring between the redox center of GOD and electrode, and the ZnO/graphene heterostructure facilitated the transport of electrons on the hybride electrode. The glucose sensor based on the GOD-ZnO/CRG/Pt electrode had a high sensitivity of 17.64 μA mM−1, which is higher than most of the previously reported values for direct electron transfer based glucose biosensors. Moreover, this biosensor is linearly proportional to the concentration of glucose in the range of 0.2–1.6 mM. The study revealed that the band structure of electrode could affect the detection of direct electron transfer of GOD, which would be helpful for the design of the biosensor electrodes in the future.

Conductance method and capacitance-voltage (C-V) measurements are used to detect and analyze the characteristics of traps in thermally oxidized and NO-annealed SiO2/4 H-SiC-based metal-oxide-semiconductor (MOS) structures, which have energy levels near the conduction band edge (EC) of 4 H-SiC. The near-interface traps (NITs) located within SiO2 near the SiO2/4 H-SiC interface, which have a strong effect on the mobility and reliability of the MOS devices, are separated from the interface traps. According to the bias state of the MOS capacitors, two types of electron exchange mechanisms between the energy level of NITs and EC of 4 H-SiC are proposed. The influence of NITs on the (C-V) and conductance characteristics of the MOS capacitors is studied. The possible effect of NITs on the performance of electronic devices containing a MOS capacitor is predicted.

No abstract

No abstract

Self-assembly was used to synthesize high-density Pt nanoparticles on chemically reduced graphene sheets (CRGSs). By employing 1-pyrenemethylamine (Py-CH2NH2) as the interlinker to form a self-assembled layer on the surface of graphene nanosheets via π–π stacking, high-density Pt nanoparticles on CRGSs were obtained. The uniform and high-density Pt nanoparticle/CRGS composite may have potential in the fields of catalysis, surface-enhanced Raman spectra, and fuel cells.

No abstract