The output enhancement of a green InGaN/GaN quantum-well (QW) light-emitting diode (LED) through the coupling of a QW with localized surface plasmons (LSPs), which are generated on Ag nanostructures on the top of the device, is demonstrated. The suitable Ag nanostructures for generating LSPs of resonance energies around the LED wavelength are formed by controlling the Ag deposition thickness and the post-thermal-annealing condition. With a 20 mA current injected onto the LED, enhancements of up to 150% in electroluminescence peak intensity and of 120% in integrated intensity are observed. By comparing this with a similar result for a blue LED previously published, it is confirmed that surface plasmon coupling for emission enhancement can be more effective for an InGaN/GaN QW of lower crystal quality, which normally corresponds to the emission of a longer wavelength.

The authors demonstrate the coupling effects between the quantum well ͑QW͒ and surface plasmon ͑SP͒ generated nearby on the p-type side in an InGaN / GaN single-QW light-emitting diode ͑LED͒. The QW-SP coupling leads to the enhancement of the electroluminescence ͑EL͒ intensity in the LED sample designed for QW-SP coupling and reduced SP energy leakage, when compared to a LED sample of weak QW-SP coupling or significant SP energy loss. In the LED samples of significant QW-SP coupling, the blueshifts of the photoluminescence and EL emission spectra are observed, indicating one of the important features of such a coupling process. The device performance can be improved by using the n-type side for SP generation such that the device resistance can be reduced and the QW-SP coupling effect can be enhanced ͑by further decreasing the distance between the QW and metal͒ because of the higher carrier concentration in the n-type layer.

The experimental demonstrations of light-emitting diode (LED) fabrication with surface plasmon (SP) coupling with the radiating dipoles in its quantum wells are first reviewed. The SP coupling with a radiating dipole can create an alternative emission channel through SP radiation for enhancing the effective internal quantum efficiency when the intrinsic non-radiative recombination rate is high, reducing the external quantum efficiency droop effect at high current injection levels, and producing partially polarized LED output by inducing polarization-sensitive SP for coupling. Then, we report the theoretical and numerical study results of SP-dipole coupling based on a simple coupling model between a radiating dipole and the SP induced on a nearby Ag nanoparticle (NP). To include the dipole strength variation effect caused by the field distribution built in the coupling system (the feedback effect), the radiating dipole is represented by a saturable two-level system. The spectral and dipole-NP distance dependencies of dipole strength variation and total radiated power enhancement of the coupling system are demonstrated and interpreted. The results show that the dipole-SP coupling can enhance the total radiated power. The enhancement is particularly effective when the feedback effect is included and hence the dipole strength is increased.

The authors demonstrate the temperature-dependent behavior of the surface plasmon ͑SP͒ coupling with two InGaN / GaN quantum-well ͑QW͒ structures of different internal quantum efficiencies. The SP modes are generated at the interface between the QW structures and Ag thin films coated on their tops. It is observed that the SP-QW coupling rate increases with temperature. Such a trend may rely on several factors, including the availability of carriers with sufficient momenta for transferring the energy and momentum into the SP modes and possibly the variation of the SP density of state with temperature. Although the required momentum matching condition only needs the thermal energy corresponding to a few tens of Kelvins, the carrier delocalization process results in a significantly higher probability of SP-carrier momentum matching and hence SP-QW coupling.

We demonstrate the variations of the photoluminescence (PL) spectral peak position and intensity through the surface plasmon (SP) coupling with an InGaN/GaN quantum well (QW) by forming Ag nanostructures of different scale sizes on the QW structure with thermal annealing. By transferring an Ag thin film into a nanoisland structure, we can not only enhance the PL intensity, but also adjust the SP dispersion relation and hence red-shift the effective QW emission wavelength. Such an emission spectrum control can be realized by initially coating Ag films of different thicknesses. Although the screening process of the quantum-confined Stark effect, which can result in PL spectrum blue-shift and intensity enhancement, also contributes to the variations of the emission behaviour, it is found that the SP-QW coupling process dominates in the observed phenomena.