For the development of anisotropic thermal interface materials (TIMs), a rod-shaped reactive monomer PNP-6MA is newly designed and successfully synthesized. PNP-6MA reveals a smectic A (SmA) mesophase between crystalline (K) and isotropic (I) phases. PNP-6MA can be oriented under a magnetic field ( B = 2 T), and its macroscopic orientation can be robustly stabilized by in situ polymerization. Even without macroscopic orientations, the fabricated thermal conducting liquid crystal (TCLC) films show the outstanding thermal conductivity of 1.21 W/m K, which is higher than conventional organic materials. The thermal conductivity of uniaxially and macroscopically oriented TCLC films can be 2.5 W/m K along the long axis of mesogenic core. The newly developed TCLC film can be used as a TIM between a high-power light-emitting diode and a heat sink.
A triphenylene-based reactive mesogenic molecule (abbreviated as HABET) was newly designed and synthesized as a programmed building block to construct the striped walls by the photopolymerization in the anisotropic liquid crystal (LC) solvents. On the basis of thermal, scattering and microscopic analyses, it was found that HABET formed three ordered structures: a columnar hexagonal LC phase (Φ H ), a tilted columnar hexagonal LC phase (Φ T ) and a highly ordered columnar oblique crystal phase (Φ OK ). The microscopic molecular orientations in the hierarchical superstructures were controlled in the anisotropic LC solvents with the help of surface anchoring forces, while the dimensions of the striped wall morphologies were determined by the patterned photomasks. The long axis of self-assembled columns in the striped walls was perpendicular to the surface alignment direction regardless of the photomask direction. Additionally, it was realized that the shapes of water drops as well as the surface water contact angles can be tuned by the hierarchical superstructures and morphologies of the polymerized HABET networks. The anisotropic hierarchical superstructures and morphologies concurrently fabricated during the polymerization in the anisotropic LC medium can offer a potential pathway for liquid transportation in the microfluidic devices.
For the development of advanced heat transfer organic materials (HTOMs) with excellent thermal conductivities, triphenylene-based reactive discogens, 2,3,6,7,10,11-hexakis(but-3-enyloxy)triphenylene (HABET) and 4,4',4″,4‴,4'''',4'''''-(triphenylene-2,3,6,7,10,11-hexaylhexakis(oxy))hexakis(butane-1-thiol) (THBT), were synthesized as discotic liquid crystal (DLC) monomers and cross-linkers, respectively. A temperature-composition phase diagram of HABET-THBT mixtures was first established based on their thermal and microscopic analyses. From the experimental results, it was realized that the thermal conductivity of DLC HTOM was strongly affected by the molecular organizations on a macroscopic length scale. Macroscopic orientation of self-assembled columns in DLC HTOMs was effectively achieved under the rotating magnetic fields and successfully stabilized by the photopolymerization. The DLC HTOM polymer-stabilized at the LC phase exhibited the remarkable thermal conductivity above 1 W/mK. When the DLC HTOM was macroscopically oriented, the thermal conductivity was estimated to be 3 W/mK along the in-plane direction of DLC molecule. The outstanding thermal conductivity of DLC HTOM should be originated not only from the high content of two-dimensional aromatic discogens but also from the macroscopically oriented and self-assembled DLC. The newly developed DLC HTOM with an outstanding thermal conductivity as well as with an excellent mechanical sustainability can be applied as directional heat dissipating materials in electronic and display devices.
To develop an advanced heat transfer composite, a deeper understanding of the interfacial correlation between matrix and filler is of paramount importance. To verify the effect of interfacial correlations on the thermal conductivity, the conductive fillers such as expanded graphite (EG) and boron nitride (BN) are introduced in the discotic liquid crystal (DLC)-based polymeric matrix. The DLC matrix exhibits better interfacial affinity with EG compared to BN because of the strong π-π interactions between EG and DLC. Thanks to its excellent interfacial affinity, the EG-DLC composites show a synergistic increment in thermal conducting performance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.