No abstract

No abstract

Distinction between neuropathic pain and nociceptive pain helps facilitate appropriate management of pain; however, diagnosis of neuropathic pain remains a challenge. The aim of this study was to develop a Korean version of the Leeds Assessment of Neuropathic Symptoms and Signs (LANSS) pain scale and assess its reliability and validity. The translation and cross-cultural adaptation of the original LANSS pain scale into Korean was established according to the published guidelines. The Korean version of the LANSS pain scale was applied to a total of 213 patients who were expertly diagnosed with neuropathic (n = 113) or nociceptive pain (n = 100). The Korean version of the scale had good reliability (Cronbach's α coefficient = 0.815, Guttman split-half coefficient = 0.800). The area under the receiver operating characteristic curve was 0.928 with a 95% confidence interval of 0.885-0.959 (P < 0.001), suggesting good discriminate value. With a cut-off score ≥ 12, sensitivity was 72.6%, specificity was 98.0%, and the positive and negative predictive values were 98% and 76%, respectively. The Korean version of the LANSS pain scale is a useful, reliable, and valid instrument for screening neuropathic pain from nociceptive pain.

In this work, high-performance pore-filled anion-exchange membranes (PFAEMs) with double cross-linking structures have been successfully developed for application to promising electrochemical energy conversion systems, such as alkaline direct liquid fuel cells (ADLFCs) and vanadium redox flow batteries (VRFBs). Specifically, two kinds of porous polytetrafluoroethylene (PTFE) substrates, with different hydrophilicities, were utilized for the membrane fabrication. The PTFE-based PFAEMs revealed, both excellent electrochemical characteristics, and chemical stability in harsh environments. It was proven that the use of a hydrophilic porous substrate is more desirable for the efficient power generation of ADLFCs, mainly owing to the facilitated transport of hydroxyl ions through the membrane, showing an excellent maximum power density of around 400 mW cm−2 at 60 °C. In the case of VRFB, however, the battery cell employing the hydrophobic PTFE-based PFAEM exhibited the highest energy efficiency (87%, cf. AMX = 82%) among the tested membranes, because the crossover rate of vanadium redox species through the membrane most significantly affects the VRFB efficiency. The results imply that the properties of a porous substrate for preparing the membranes should match the operating environment, for successful applications to electrochemical energy conversion processes.