The paper presents a constructing methodology for a modern approach to tools selection and solving the problem of assigning optimal cutting parameters for specific production conditions. The mathematical formulation determining the extreme values of the technological process optimality criteria is obtained. A system of technical and economic quality indicators for cutting tools is proposed. This system allows principles’ implementation of decentralization and interoperability “Industry 4.0” via finite element modeling of the cutting process based on solving the problem of orthogonal free cutting modeling. The proposed methodology further usage is possible by creating a standardized database on the parameters of the tool: the adhesive component of the friction cutting coefficient for processing of a specific pair of cutting and tool materials (or tool coating material) and the impacts of the cutting-edge radius on cutting efficiency of a particular material.
The technical and economic efficiency of new PCMs depends on the ability to predict their performance. The problem of predicting the properties of PCMs can be solved by computer simulation by the finite element method. In this work, an experimental determination of the physical and mechanical properties of PTFE PCMs depending on the concentration of fibrous and dispersed filler was carried out. A finite element model in ANSYS APDL was built to simulate the strength and load-bearing capacity of the material with the analysis of damage accumulation. Verification of the developed computer model to predict the mechanical properties of composite materials was performed by comparing the results obtained during field and model experiments. It was found that the finite element model predicts the strength of chaotically reinforced spherical inclusions of composite materials. This is due to the smoothness of the filler surfaces and the lack of filler dissection in the model. Instead, the prediction of the strength of a finite element model of chaotically reinforced cylindrical inclusions of composite materials requires additional analysis. The matrix and the fibrous filler obviously have stress concentrators and are both subject to the difficulties of creating a reliable structural model.
In order to study the strength of the proposed rope threaded joint for machine parts made of reinforced composite materials, a modeling of a stress-strain state was conducted using the software of finite-element analysis LS-DYNA. Stress-strain state modeling was conducted for a rope threaded joint, affecting on the main performance parameters considered to be p – thread pitch (p = 4 mm), and t – thread depth (t = 1 mm). The main thread parameters taken for the model were up to the metric thread М6 (ISO 724:1993) parameters.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.