The quality of science and mathematics in Madrasah is considered a chronic disease. In order to find a solution, the main mission and function of the Religious Center of Research and Development in the years 2007 – 2010 was to implement a test upgrade concerning the quality of science and mathematics through developing the source of study in 48 Madrasah Ibtidaiyah in 12 Cities/Regions and in 6 provinces. Through program evaluation using the CIPP method (context, input, process, product) the results were obtained showing a significant increase in learning in science and mathematics (through the comparison of the pre- and post-test results and the control Madrasah ibtidaiyah students). This proves that the science and mathematics study development resources appear to be effective in increasing the quality of study. Mutu pembelajaran mata pelajaran IPA dan Matematika di madrasah bagaikan penyakit kronis yang susah disembuhkan. Untuk mencari solusi dari permasalahan tersebut maka sesuai tugas pokok dan fungsi Puslitbang Pendididkan Agama dan Keagamaan pada tahun 2007 - 2010 telah dilaksanakan ujicoba Peningkatan Mutu Pembelajaran IPA dan Matematika di Madrasah Melalui Pengembangan Sumber Belajar pada 48 MI di 12 Kab/Kota di 6 Propinsi. Melalui Evaluasi Program dengan menggunakan metode CIPP (context, input, process, product) diperoleh hasil menunjukkan terjadinya peningkatan yang signifikan nilai hasil belajar IPA dan Matematika siswa MI ujicoba (melalui perbandingan hasil Pre –Post test dan uji banding dengan siswa MI control). Ini membuktikan bahwa ujicoba pengembangan sumber belajar IPA dan Matematika efektif meningkatakan mutu pembelajaran.
Dalam kegiatan penambangan sering terjadi adanya ketidak sesuaian antara rencana dengan kondisi aktual di lapangan. Tujuan dari penelitian ini adalah mengetahui faktor penyebab terjadinya perubahan kadar Ni antara mine plan dan realisasi penambangan. Pada penelitian ini menggunakan data plan model cadangan dari hasil inpit drill, data Pit design, data pengukuran kemajuan tambang dan data realisasi penambangan. Dari hasil penelitian mine plan yang paling mendekati dengan realisasi adalah plan dengan selisih kadar Ni pada minggu pertama adalah 0,15% dengan persentase sebesar 6,75%, pada minggu kedua selisih kadar Ni sebesar 0,33% dengan persentase sebesar 13,80%, pada minggu ketiga selisih kadar Ni sebesar 0,24% dengan persentase sebesar 9,44% dan pada minggu keempat selisih kadar Ni sebesar 0,19% dengan persentase sebesar 7,66%. Hal tersebut dipengaruhi oleh adanya penyebaran bijih yang bersifat heterogen, posis waste terhadap bijih dan cuaca dan keterampilan operator.
Kawasan industri yang dibangun oleh PT Indonesia Morowali Industrial Park (IMIP) merupakan kawasan industri terpadu berbasis pada pengelolaan nikel yang juga berisi industri turunannya yang lain yaitu stainless steel. Beton merupakan bahan bangunan yang banyak digunakan dalam membangun struktur kerja di Indonesia karena banyaknya manfaat yang diberikan seperti bahan penyusunnya mudah didapat, mudah dipasang, mampu membawa beban berat, tahan terhadap suhu tinggi, dan biaya pemeliharaan. Berbagai upaya telah dilakukan untuk membuat semen. Upaya tersebut dilakukan terhadap persyaratan pemanfaatan slag dari PT Indonesia Morowali Industrial Park. Kemudian dilanjutkan dengan mengetahui perbandingan kuat tekan pada pengolahan limbah terak (slag) dengan mensubstitusi pada semen dan pasir, pada substitusi ke semen kuat tekan tertinggi berada pada substitusi terak 15% yaitu mencapai kuat tekan 24,295 MPa atau 25,34% lebih tinggi dibanding beton normal dan akan menurun kuat tekannya ketika mendapatkan substitusi lebih dari 15% sedangkan pada substitusi ke pasir akan mendapatkan kuat tekan kuat tekan tertinggi pada substitusi ke 30%, yaitu mencapai 28,956 MPa atau 49,385 lebih tinggi dibandingkan beton normal. Pada penggunaan substitusi slag ke pasir akan bertambah kuat tekannya apabila substitusi yang digunakan lebih tinggi. Jadi penggunaan slag sebagai substitusi semen dan pasir pada beton k-225 sebaiknya digunakan pada substitusi ke pasir sehingga penggunaan limbah slag lebih banyak dan memperoleh kuat tekan yang tinggi.
Pada saat proses preparasi sampel bijih nikel perbandingan antara massa sampel dan massa lot serta sifat keheterogenan material dapat mempengaruhi hasil analisis kadar Ni dan Fe. Tujuan dari penelitian ini adalah untuk menentukan pengaruh fundamental sampling error kadar Ni dan Fe terhadap relative different kadar Ni dan Fe. Metode yang dilakukan yaitu metode statistik deskriptif dan inferensial. Hasil yang diperoleh adalah quality assurance yaitu untuk kadar Ni dengan standar deviasi 0,065 dan kadar Fe dengan standar deviasi 0,40, untuk quality control kadar Ni dengan relative different yaitu 15% dan kadar Fe dengan relative different 17% dan persentase fundamental sampling error kadar Ni yaitu ± 1,55% dan kadar Fe yaitu ± 1,77%. Berdasarkan dari hasil penelitian disimpulkan bahwa pengaruh fundamental sampling error terhadap relative different kadar Ni sebesar ± 1,55% dan kadar Fe ± 1,77%. Pengaruh fundamental sampling error terhadap relative different kecil karena <5%.
Penelitian ini bertujuan untuk (1) Mengetahui kualitas batuan daerah penelitian berdasarkan klasifikasi Rock Mass Rating dari data yang ada di lapangan dan hasil pengujian laboratorium; (2) Menentukan jenis dan arah longsoran pada lereng berdasarkan proyeksi stereografis dari data scanline yang dilakukan di lokasi penelitian; (3) Menganalisis kondisi lereng berdasarkan klasifikasi Slope Mass Rating dari data Rock Mass Rating serta arah dan jenis longsoran; (4) Menentukan stabilitas lereng batupasir. Adapun manfaat dari penelitian ini yaitu dapat memberikan pengetahuan tambahan kepada pembaca tentang kualitas batuan berdasarkan klasifikasi Rock Mass Rating, penentuan arah dan jenis longsoran berdasarkan proyeksi stereografis, analisis Slope Mass Rating, serta serta penetuan stabilitas lereng batupasir. Penelitian ini pula dapat memberikan kontribusi referensi dalam bidang geoteknik serta hasil dari penelitian ini dapat digunakan sebagai masukan dan pertimbangan bagi penelitian sejenis untuk selanjutnya. Metode pengambilan data yang digunakan dalam penelitian ini adalah profiling yaitu mengukur geometri lereng; scan-line yaitu mengukur orientasi bidang diskontinuitas pada permukaan yang dianggap mewakili orientasi bidang bidang diskontinu secara keseluruhan; dan preparasi sampel batuan yang didapatkan dari lapangan akan dipotong sesuai dengan ukuran pengujian. Menentukan pembobotan Slope Mass Rating dibutuhkan klasifikasi batuan dengan menggunakan Rock Mass Rating, penentuan stabilitas lereng menggunakan software slide V6.0. Hasil penelitian menujukkan bahwa bobot total massa batuan pasir yang didapatkan menggunakaan pembobotan Rock Mass Rating adalah 46, berada pada kelas III dengan deskripsi batuan sedang. Terdapat dua potensi tipe longsoran berdasarkan hasil analisis proyeksi stereografis yaitu potensi longsoran baji dengan arah longsoran yaitu N30 o E dan longsoran guling dengan arah longsoran N48 o E. Bobot total massa yang didapatkan menggunakan pembobotan Slope Mass Rating untuk potensi longsoran baji yaitu 37 yang berada pada kelas II dan pada potensi longsoran guling yaitu 56,8 yang berada pada kelas III. Untuk stabilitas lereng memiliki nilai faktor keamanan 0,647 yang menunjukkan bahwa lereng tersebut tidak stabil.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.