Background: The to date evidence for a dose-response relationship between physical workload and the development of lumbar disc diseases is limited. We therefore investigated the possible etiologic relevance of cumulative occupational lumbar load to lumbar disc diseases in a multi-center case-control study.
BackgroundIn Germany, about 86.7 % of the dentists have stated to suffer from pain in the neck and shoulder region. These findings are predominantly based on surveys. Therefore the objective of this study is to conduct a kinematic analysis of occupational posture in dentistry.MethodsTwenty one dentists (11 f/10 m; age: 40.1 ± 10.4 years) have participated in this examination. The CUELA-System was used to collect kinematic data of the activities on an average dental workday. A detailed, computer-based task analysis took place parallel to the kinematic examination. Through the synchronization of data collected from both measurements, patterns of posture were arranged chronologically and in conjunction with the tasks performed: (I) “treatment” (II) “office” and (III) “other activities”. For the data analysis, characteristic data of joint angular distributions (percentiles P05, P25, P50, P75 and P95) of head, neck and torso at pre-defined tasks were examined and assessed corresponding to ergonomic standards.ResultsForty one percent of tasks executed on an average dental workday can be categorized as the treatment of patients. These tasked are most frequently performed in “straight back” positions (78.7 %), whereas 20.1 % were carried out in a “twisted or inclined” torso posture, 1.1 % “bowed” and only 0.1 % “bowed and twisted/inclined to the side” upper body position. In particular, it can be observed that in the area of the cervical and thoracic spine the 75th and 95th percentile show worse angular values during treatment than during non-dental tasks. For the period of treatment (at a standardized dental chair construction), a seated position with a strong inclination of the thoracic spine to the right while the lumbar spine is inclined towards the left is adopted.ConclusionThe kinematic analysis of dentists illustrates typical patterns of postures during tasks that are essential to the dental treatment of patients. The postures in the area of the cervical and thoracic spine have higher angular values during treatment compared to other dental tasks. Consistently, appropriate ergonomic design measures to optimize the dental chair and equipment as well as integrated training in ergonomics as part of the study of dentistry to prevent musculoskeletal are recommended.Electronic supplementary materialThe online version of this article (doi:10.1186/s12891-016-1288-0) contains supplementary material, which is available to authorized users.
BackgroundHow a dentist works, such as the patterns of movements performed daily, is also largely affected by the workstation Dental tasks are often executed in awkward body positions, thereby causing a very high degree of strain on the corresponding muscles. The objective of this study is to detect those dental tasks, during which awkward postures occur most frequently. The isolated analysis of static postures will examine the duration for which these postures are maintained during the corresponding dental, respectively non-dental, activities.Methods: 21 (11f/10 m) dentists (age: 40.1 ± 10.4 years) participated in this study. An average dental workday was collected for every subject. To collect kinematic data of all activities, the CUELA system was used. Parallel to the kinematic examination, a detailed computer-based task analysis was conducted. Afterwards, both data sets were synchronized based on the chronological order of the postures assumed in the trunk and the head region. All tasks performed were assigned to the categories “treatment” (I), “office” (II) and “other activities” (III). The angle values of each body region (evaluation parameter) were examined and assessed corresponding to ergonomic standards. Moreover, this study placed a particular focus on static positions, which are held statically for 4 s and longer.ResultsFor “treatment” (I), the entire head and trunk area is anteriorly tilted while the back is twisted to the right, in (II) and (III) the back is anteriorly tilted and twisted to the right (non-neutral position). Static positions in (I) last for 4–10s, static postures (approx. 60%) can be observed while in (II) and (III) in the back area static positions for more than 30 s are most common. Moreover, in (II) the back is twisted to the right for more than 60 s in 26.8%.ConclusionAwkward positions are a major part of a dentists’ work. This mainly pertains to static positions of the trunk and head in contrast to “office work.” These insights facilitate the quantitative description of the dentist profession with regard to the related physical load along with the health hazards to the musculoskeletal system. Moreover, the results allow for a selective extraction of the most unfavorable static body positions that dentists assume for each of the activities performed.
BackgroundMedical doctors are essential for the German public and occupational health system. They ensure the productivity of German society by enabling people to regain and recover their health. That is why the physicians’ health and hence their productivity require special attention. Musculoskeletal disorders have a high prevalence in this work area. As a consequence, movement sequences, range of motions, and body postures of physicians in the course of the working day are in focus of this research project.MethodsFor this investigation 21 male or female junior physicians of various conservative medical disciplines will be covered. Data will be collected over one working day (approx. 9 hours). The CUELA system attached to the test person’s body detects body posture and/or movements. This biomechanical measurement system ensures a locomotor and posture analysis that includes movement sequences, movement intensity, and range of motions to qualify the work tasks. For data analysis intra- and inter-professional comparisons are chosen.ConclusionsWorking movement sequence analysis of physicians by means of the CUELA system is exclusive and novel in its focus. Up to now, knowledge of the working tasks of medical doctors has only been acquired by real-time observation approaches to work activity. In addition to this method of analysis, the CUELA system is able to record quantified biomechanical data about musculoskeletal loads of ordinary working tasks. Workloads and activities of physicians can be improved by ergonomic work design to reduce musculoskeletal disorders by utilizing the data collected. The healthcare system in Germany will thus be optimized by improving medical doctors’ health. Consequently, MAGRO-MSA will also be used for other healthcare professions such as nurses and physicians assistants.
Background: Work-related musculoskeletal disorders at the elbow are a common health problem, which highly impacts workers’ well-being and performance. Besides existing qualitative information, there is a clear lack of quantitative information of physical risk factors associated with specific disorders at the elbow (SDEs). Objective: To provide evidence-based quantitative measures of physical risk factors associated with SDEs. Methods: Studies were searched from 2007 to 2017 in Medline, EMBASE, and Cochrane Work. The identified risk factors were grouped in main- and sub-categories of exposure using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) framework for rating evidence. Results: 133 different risk-factor specifications were identified in 10/524 articles and were grouped into 5 main- and 16 sub-categories of exposure. The risk factors were significantly associated with lateral epicondylitis, medial epicondylitis, or ulnar neuropathy. Significant risk factors such as wrist angular velocity (5°/s, with increasing prevalence ratio of 0.10%/(°/s), or forearm supination (≥45° and ≥5% of time combined with forceful lifting) were found. Conclusions: This review delivers a categorization of work-related physical risk-factor specifications for SDEs with a special focus on quantitative measures, ranked for evidence. These results may build the base for developing risk assessment methods and prospective preventive measures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.