Selective hydrogenation of α,ß-unsaturated aldehydes to unsaturated alcohols is a challenging class of reactions, yielding valuable intermediates for the production of pharmaceuticals, perfumes, and flavorings. On monometallic heterogeneous catalysts, the formation of the unsaturated alcohols is thermodynamically disfavored over the saturated aldehydes. Hence, new catalysts are required to achieve the desired selectivity. Herein, the literature of three major research areas in catalysis is integrated as a step toward establishing the guidelines for enhancing the selectivity: reactor studies of complex catalyst materials at operating temperature and pressure; surface science studies of crystalline surfaces in ultrahigh vacuum; and first-principles modeling using density functional theory calculations. Aggregate analysis shows that bimetallic and dilute alloy catalysts significantly enhance the selectivity to the unsaturated alcohols compared to monometallic catalysts. This comprehensive review focuses primarily on the role of different metal surfaces as well as the factors that promote the adsorption of the unsaturated aldehyde via its C=O bond, most notably by electronic modification of the surface and formation of the electrophilic sites. Furthermore, challenges, gaps, and opportunities are identified to advance the rational design of efficient catalysts for this class of reactions, including the need for systematic studies of catalytic processes, theoretical modeling of complex materials, and model studies under ambient pressure and temperature.

The migration of species across interfaces can crucially affect the performance of heterogeneous catalysts. A key concept in using bimetallic catalysts for hydrogenation is that the active metal supplies hydrogen atoms to the host metal, where selective hydrogenation can then occur. Herein, we demonstrate that, following dihydrogen dissociation on palladium islands, hydrogen atoms migrate from palladium to silver, to which they are generally less strongly bound. This migration is driven by the population of weakly bound states on the palladium at high hydrogen atom coverages which are nearly isoenergetic with binding sites on the silver. The rate of hydrogen atom migration depends on the palladium−silver interface length, with smaller palladium islands more efficiently supplying hydrogen atoms to the silver. This study demonstrates that hydrogen atoms can migrate from a more strongly binding metal to a more weakly binding surface under special conditions, such as high dihydrogen pressure.

This is the author manuscript accepted for publication and has undergone full peer review but has not been through the copyediting, typesetting, pagination and proofreading process, which may lead to differences between this version and the Version of Record.

Ni is one of the most extensively utilized metals in industrial catalysis. For example, Ni is the catalyst of choice for the steam reforming of hydrocarbons. However, pure Ni also detrimentally catalyzes the formation of graphitic carbon, which in turn leads to coking and deactivation of the catalyst. It has been shown that alloying small amounts of a less reactive metal like Au into Ni can alleviate this issue by breaking up the larger Ni ensembles that promote coke formation. We are taking the opposite of this approach by alloying very small amounts of Ni into Cu, a catalytically less active host metal, to create single Ni atom sites. In this way our single-atom alloy approach has the potential to greatly enhance catalytic selectivity and reduce poisoning, analogous to other single-atom alloys such as PtCu and PdCu. Herein we report the atomic-scale surface structure and local geometry of low coverages of Ni deposited on a Cu(111) single crystal as determined by scanning tunneling microscopy. At 433 K, low concentrations of Ni alloy in the Cu host as a single-atom alloy in Ni-rich brims along ascending step edges. To support our STM assignments of the single-atom dispersion of Ni, reflection absorption infrared spectroscopy of CO on NiCu was performed. To access the binding strength of CO to isolated Ni sites, we used temperature-programmed desorption studies, which revealed that CO binds more weakly to single Ni atoms in Cu compared with Ni(111), indicating that NiCu single-atom alloys are promising for catalytic applications in which CO poisoning is an issue. Together, these results provide a guide for the preparation of NiCu single-atom alloy model catalysts that are predicted by theory to be promising for a number of reactions.

Understanding cellular electrical communications in both health and disease necessitates precise subcellular electrophysiological modulation. Nanomaterial-assisted photothermal stimulation was demonstrated to modulate cellular activity with high spatiotemporal resolution. Ideal candidates for such an application are expected to have high absorbance at the near-infrared window, high photothermal conversion efficiency, and straightforward scale-up of production to allow future translation. Here, we demonstrate two-dimensional Ti 3 C 2 T x (MXene) as an outstanding candidate for remote, nongenetic, optical modulation of neuronal electrical activity with high spatiotemporal resolution. Ti 3 C 2 T x 's photothermal response measured at the single-flake level resulted in local temperature rises of 2.31 ± 0.03 and 3.30 ± 0.02 K for 635 and 808 nm laser pulses (1 ms, 10 mW), respectively. Dorsal root ganglion (DRG) neurons incubated with Ti 3 C 2 T x film (25 μg/cm 2 ) or Ti 3 C 2 T x flake dispersion (100 μg/mL) for 6 days did not show a detectable influence on cellular viability, indicating that Ti 3 C 2 T x is noncytotoxic. DRG neurons were photothermally stimulated using Ti 3 C 2 T x films and flakes with as low as tens of microjoules per pulse incident energy (635 nm, 2 μJ for film, 18 μJ for flake) with subcellular targeting resolution. Ti 3 C 2 T x 's straightforward and large-scale synthesis allows translation of the reported photothermal stimulation approach in multiple scales, thus presenting a powerful tool for modulating electrophysiology from single-cell to additive manufacturing of engineered tissues.