No abstract

No abstract

No abstract

This study evaluated the efficacy of sodium thiosulphate (ST) as an intermediate irrigant between sodium hypochlorite (NaOCl) and chlorhexidine (CHX) to avoid the formation of the brown-coloured precipitate. The in vitro experiment used microtubes to test the mixture of 2.5% NaOCl, 2% CHX and 5% ST solutions, varying their order and time of addition. In the ex vivo experiment, 10 bovine teeth were divided into two groups according to the intermediate irrigant used: distilled water (control) and 5% ST (experimental). Colour change occurred in all microtubes after interaction between solutions. While the precipitate was not observed in the experimental group, it was seen in all specimens of the control group. The 5% ST was able to prevent the formation of the brown-coloured precipitate in the ex vivo experiment, whereas it only prevented its in vitro formation when the waiting time for adding CHX was 10, 15 and 20 min.

The aim of the present study was to evaluate the cyclic fatigue, torsional resistance and surface roughness of Reciproc R25 instruments in four different situations, namely as new instruments and as instruments tested after clinical preparation of one, two or three maxillary molars with four root canals. The total time required to perform each root canal preparation was recorded. Cyclic fatigue resistance was determined by the time to fracture using a customized testing device (n = 10 per group). The torsional test evaluated the torque and angle of rotation to failure according to ISO 3630-1 (n = 10 per group). The roughness of the working parts of new and used instruments was evaluated with a profilometer (n = 5 per group). Statistical analysis was performed using one-way ANOVA and Tukey's test. The level of significance was set at 5%. No fractures or deformations were observed after clinical use. Higher preparation time was needed during the third use of the instruments for all root canals (p < 0.05). There were no significant differences among the groups in regard to either cyclic fatigue or torsional resistance (p > 0.05). Regarding the roughness measurements, groove depth was higher on new and one-versus two-or three-maxillary-molar-prepared instruments (p < 0.05). It can be concluded that the clinical use of Reciproc instruments increased preparation time and decreased surface roughness. However, clinical use did not affect the cyclic fatigue or torsional resistance of the Reciproc instruments.