This study aimed to conduct systematic research on the design of high-density zircon (ZrO2) grinding media (0.2-1 mm) in a laboratory-scale media mill (750 ml) for wet grinding of calcite (CaCO3, d50= 5.4 µm). Sub-micron grinding experiments were carried out by using different amounts of finer grinding media (25%, 50% and 75%) and different size ratio of finer-coarser media (0.2 and 0.5). Besides, the surface areas (Sbw, m 2 /kg) of grinding media on grinding performance were investigated. If the best experimental results are compared (M1 and M4), it is found that the Sbw of the bimodal media (M4) is 75% larger compared to that of monosized media (M1). The experimental results were analyzed based on product size (d50, d80), cumulative undersize curves and specific surface area (SW, m 2 /g). The findings showed that only the finer grinding media was not very effective at 600 rpm.
Geliş/Received: 29.04.2021; Kabul/Accepted in Revised Form: 30.12.2021) ÖZ: Bu çalışma ile öğütme yardımcılarının tür ve dozajının öğütme verimi üzerine etkileri incelenmiş olup aynı zamanda atıkların çevre üzerindeki olumsuz etkilerinin verimli kullanım yoluyla azaltılması planlanmıştır. Yapılan kuru öğütme deneylerinde üç farklı gruptan altı tane öğütme yardımcısının, beş farklı dozajının (ağırlıkça, %0, %0,25, %0,5, %1 ve %2) ürün üzerindeki etkisi araştırılmıştır. Yapılan bu çalışma ile farklı gruplarda yer alan öğütme yardımcısı cins ve miktarının ürün boyutu (d80), boyut dağılımı ve sıcaklık (C°) üzerine etkisi araştırılmıştır. Bu çalışma, doğal kaynakların tükenmesini önlemek, atıkların değerli ve kullanılabilir ürüne dönüştürülmesi konusuna umut verici nitelikte bir çalışma olup aynı zamanda kullanılan öğütme yardımcıları ile öğütme performansı üzerinde önemli iyileşmelerin sağlandığı görülmüştür. Uygun dozajlarda öğütme yardımcısı kullanılarak yapılan deneylerde, öğütme yardımcısız yapılan deneylere nazaran ürün boyutu, sıcaklık ve boyut dağılımı açısından daha iyi sonuçlar elde edilmiştir.
Glycerin represents the primary by-product of biodiesel generation when vegetable oil is transesterified with ethanol or methanol. Nowadays, the need to turn to alternative materials is increasing due to the competition arising from developing technology and industry and the rapid consumption of Earth’s resources. It is essential to study how to prevent the depletion of natural resources and transform wastes into usable and valuable products. The use of waste glycerin (WG) as a grinding aid can constitute an alternative solution in terms of utilizing the excess glycerin resulting from biodiesel production. This paper investigated the usability of WG as a grinding aid in terms of grinding efficiency while planning to decrease the adverse impacts of waste on the environment via its efficient utilization. The dry grinding experiments conducted within the study’s scope researched the impacts of five biodiesel dosages (0%, 0.25%, 0.5%, 1%, and 2% by weight) on the product. The current research is promising in terms of preventing the depletion of natural resources and transforming waste into usable and valuable products. Furthermore, considerable enhancements were obtained in the grinding performance with the grinding aid utilized.
Bu makale, talkın karıştırmalı bilyalı değirmen ile kuru öğütülmesinde öğütme parametrelerinin etkilerini değerlendirmektedir. Karıştırma hızı, katı oranı, bilya doluluk oranı ve bilya boyut dağılımı da dâhil olmak üzere dört bağımsız faktörün etkilerini incelemek amacıyla üç seviyeli bir Box-Behnken deney tasarımı kullanılmıştır. Öğütme parametreleri ve yanıtlar arasında ampirik bir korelasyon oluşturmak amacıyla bir dizi deney yapılmıştır. Varyans analizi, kırılma oranı için oldukça iyi bir değer göstermiştir (R 2 =0,952). Yazılım çözümlerine göre, kırılma oranını maksimize etmek için en uygun koşullar, karıştırıcı hızı için 599 d/dk, katı oranı için 0,07, bilya doluluk oranı için % 65,58 ve maksimum bilya boyut dağılımında elde edilmiştir. Öğütmede ki iyileşmeyi doğrulamak amacıyla, yukarıda belirtilen optimum koşullar kullanılarak iki kez doğrulama testleri yapılmış olup ortalama kırılma oranı 3,29 elde edilmiştir. Bu elde edilen ortalama kırılma oranı 29 testte elde edilen değerlerden daha büyüktür. Öğütmenin talk tanelerinin yapısal özellikleri üzerinde etki XRD analizi ile karakterize edilmiştir. XRD ölçümleri hiçbir işlem görmemiş talk numunesine kıyasla, öğütülmüş talk numunelerinin pik alanlarında herhangi bir değişiklik gözlemlenmediğini göstermiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.