Ormanlaştırma çalışmaları uzun vadeli ve maliyetli yatırımlardır. Ekolojik koşulların uygunluğundan sonra, bu yatırımların başarısı büyük ölçüde dikilen fidanın kalitesine bağlıdır. Fidan kalite standartlarına uygun olmayan fidanların ağaçlandırma alanlarına dikilmesi, fidan kayıplarının, dolayısıyla tamamlama giderlerinin artmasına neden olmaktadır. Fidanlıklarda kaliteli fidan üretimini etkileyen en önemli faktörler besin, su ve ışık ilişkileridir. Yetersiz veya fazla beslenen fidanlar standart dışı olduğundan tutma başarıları düşmektedir. Bu nedenle, özellikle kurak ve yarı kurak alan ağaçlandırmalarında kullanılacak fidanların, kök/sak oranı dengeli, kök sisteminin çok iyi gelişmiş, suyu ve besini kolayca alabilen yapıda olması istenmektedir. Fidan kalitesini artırmak için orman fidanlıklarında toprak analizi yapıldıktan sonra besin maddesi açığına göre, kimyasal ve organik gübre takviyesi yapılmaktadır. Gübrelerin yarayışlı forma dönüştürülmeleri ve kolay alınabilmelerinde, toprak mikroorganizmalarının fonksiyonu büyüktür. Son yıllarda mineral gübrelemeler yerine, toprak mikroorganizmalarını artırarak besinlerin alınmasını sağlayan biyolojik gübreler (biyogübre, bio-inokulant) kullanılmaya başlanmıştır. Özellikle tarımsal ürünlerde verim artışı, hastalıklara karşı direnç, besin maddelerinden daha iyi faydalanma gibi hususlarda başarılı sonuçlar alınmıştır. Biyogübrelerin orman fidanlıklarında kullanımı yeni bir uygulama olup, fidan karakteristiklerine etkileri konusunda Türkiye'de yapılmış bir çalışmaya rastlanılmamıştır. Bu çalışma ile Türkiye'de ormanlaştırılan alanlarda en fazla kullanılan türlerden biri olan karaçamda ekim yastıklarına biyogübre uygulaması yapılarak, bazı fidan morfolojik karakterlerine etkisinin belirlenmesi hedeflenmiştir. Eskişehir Orman Fidanlığında gerçekleştirilen çalışma sonunda, 2+0 yaşlı karaçam fidanlarına uygulanan biyogübrenin, istatistiki bakımdan anlamlı bir fark oluşturmadığı (P>0,05) ortaya konulmuştur.
Bu çalışmanın amacı, fidanlık koşullarında yetiştirme sıklığının 2+0 yaşlı Toros sediri (Cedrus libani) fidanlarının bazı morfolojik özellikleri ile beslenme durumu üzerine etkisini araştırmaktır. Araştırmada, Isparta-Kapıdağ orijinli tohumlar kullanılmıştır. Eskişehir Orman Fidanlığı'nda 1,2 m genişliğindeki yüksek yastıklara, 15 cm aralıklarla oluşturulan 7 ekim çizgisinde, kontrol ( ̴ 1,5); 2,5; 5,0; 7,5; 10,0 cm mesafe ile yetiştirilen fidanların bazı morfolojik özellikleri ile ibre, gövde ve kök besin elementi içerikleri belirlenmiştir. Denemede rastlantı parselleri deneme deseni kullanılmıştır. Veriler varyans analizi, Duncan testi ve korelasyon analizi ile değerlendirilmiştir. Yetiştirme sıklığı fidan boyu (FB), kök boğazı çapı (KBÇ), FB/KBÇ oranı, sak taze ağırlığı, kök taze ağırlığı, fidan taze ağırlığı, sak kuru ağırlığı (SKA), kök kuru ağırlığı (KKA), fidan kuru ağırlığı (FKA), SKA/KKA oranı ve kök yüzdesini (KKA/ FKA oranı) önemli derecede etkilemiştir. İncelenen fidan morfolojik özellikleri arasında önemli ilişkiler belirlenmiştir. Fidanların sahip olduğu toplam N, P, K, Ca, Mg, Na, Fe, Zn, Cu ve Mn içeriği bakımından yetiştirme sıklıkları arasındaki farklılıklar önemli (P<0,001) bulunmuştur. Yetiştirme sıklığı azaldıkça fidanların toplam besin elementi içeriği artmıştır. Farklı sıklık derecelerinde yetiştirilen fidanların topraktan kaldırdığı besin stokları arasında anlamlı farklılıklar belirlenmiş, sıklığının azalması ile fidanların birim alandan kaldırdığı besin stokları azalmıştır. Bütün bulgular birlikte değerlendirildiğinde, kurak-yarı kurak alan ağaçlandırmalarında fidanlıkta 2,5 cm mesafeyle (232 fidan/m 2 ); yarı nemli-nemli alan ağaçlandırmalarında ise 7,5 cm mesafeyle (77 fidan/m 2 ) fidan yetiştirmenin uygun olacağı düşünülmektedir.
ÖzBu çalışma, karaçam ağaçlandırma alanlarındaki besin stoklarını belirlemek amacıyla yapılmıştır. Örneklemeler verim sınıfı, gelişim çağı ve kapalılık bakımından farklılık gösteren toplam 46 alanda yapılmıştır. Laboratuvarda, araziden alınan toprak, ölü örtü, diri örtü ve ağaç bileşenlerine ait örneklerde N, P, K, Ca, Mg, S, Na, Fe, Zn, Mn ve Cu analizleri yapılmıştır. Ekosistemin farklı bileşenlerine ait besin yoğunluklarının (%, ppm) ve besin stoklarının (kg/ha) meşcere tiplerine göre değişimi varyans analizi ile değerlendirilmiştir. Ağaç bileşenlerine ait besin yoğunlukları, genel olarak meşcere yaşına bağlı olarak azalmıştır. N, P, K, Mg, S, Zn ve Mn yoğunluğu ibrelerde, Na ve Fe yoğunluğu kuru dalda, Ca yoğunluğu ise kuru dal ve kabukta en yüksek düzeyde bulunmuştur. Makro besin elementleri ağaçlarda en fazla ibre ve kabukta depolanmaktadır. Karaçam ağaçlandırma alanlarında, S ve Fe dışındaki besin stoklarının en önemli kısmını toprak oluşturmaktadır. Kükürt stoğu c meşcerelerinde (d 1,3m =20,0-35,9 cm) ağaçlarda (58,9 kg/ha), Fe stoğu ise b (d 1,3m =8,0-19,9 cm) ve c meşcerelerinde ölü örtüde en yüksek düzeyde bulunmuştur. Fe stoğunun önemli bileşeni olması sebebiyle ölü örtünün korunmasına önem verilmelidir. Besin kaybını en az düzeye indirmek amacıyla ekonomik değeri olmayan ibre, kuru dal, kabuk ve kökün ormanda bırakılmasına azami özen gösterilmelidir. AbstractThis study was carried out to determine nutrient stocks in black pine plantations. Samplings were done in 46 plots differing in yield class, development stages and canopy closure. N, P, K, Ca, Mg, S, Na, Fe, Zn, Mn and Cu analyses were performed in soil, forest floor, ground cover and tree component samples. Changes in nutrient concentrations (%, ppm) and stocks (kg/ha) data belonging to various ecosystem compartments were evaluated by using analysis of variance. Nutrient concentration in tree components decreased with stand age. The highest N, P, K, Mg, S, Zn and Mn concentrations were found in needle. The highest Na and Fe concentrations were measaured in dead branch while dead wood and bark included the highest Ca concentration. It was concluded that macro nutrients were notably stored in needle and bark. Whereas a substantial part of total nutrient stock were found in soil, except for S and Fe. S stock were found the highest in trees in development stage c (dbh=20.0-35.9 cm, 58,9 kg/ha) while Fe stock in forest floor in development stage b (dbh=8.0-19.9 cm) and c. Forest floor should be retained in the forest because of the fact that it is a notable resourse of Fe stock. Special care should be paid to leave the needles, dead branches, barks and roots following the logging to prevent loss of nutrients as much as possible.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.