No abstract

No abstract

Eight samples of ca. 3000 year old oak wood from the Biskupin site and a piece of sound oak (Quercus sp.) wood were analysed. The degradation state of archaeological oak wood was investigated using two analytical approaches: classical wet chemical analysis and analytical pyrolysis coupled with gas chromatography and mass spectrometry (Py-GC/MS) with in situ silylation. The results were compared with those obtained for sound oak wood. Chemical analysis provided information on the amount of wood components. Their alteration at a molecular level was investigated by Py-GC/MS, highlighting how degradation can affect the formation of primary and secondary wood pyrolysis products. The results showed that the chemical changes in the wood material in the eight samples examined had different entities and extents with comparison to sound oak wood. Samples taken from the external parts of the fragments had undergone a significant loss in polysaccharide components, whereas the internal parts were in a relatively good state of preservation. Evaluation of the relative amounts of pyrolysis products deriving from holocellulose and lignin highlighted that specific categories of compounds, such as lignin monomers and anhydrosugars, can be taken as an index for good preservation of wood components. These results will be used to evaluate the effectiveness of the in situ conservation strategy by repeating the analyses on these samples after some years and comparing the results

The Oseberg collection includes the most complete ensemble of wooden remains from the Viking Age. However, since many of the wooden objects were treated with alum in the early 1900s, they now suffer from dramatic conservation issues. A multi-analytical approach was adopted to investigate both the organic and the inorganic components of some selected wood fragments, with the aim of fully characterising the materials and their decomposition products. A particular focus was taken on the differences between the surface and the core of the fragments analysed, and on the correlations between the results obtained by the different techniques, in order to disclose possible interactions between the materials during degradation. In addition to differences in alum concentration and wood alteration between the surface and the core, some decomposition/transformation products of alum, such as mercallite (KHSO4), were identified by FTIR and XRD. Contextual interpretation of the results obtained by ICP-OES elemental analysis of inorganic components and Py(HMDS)-GC/MS characterisation of degraded lignocellulosic materials supported some previous observations about potential relationships between specific metals (Al, Fe, Ca) and wood degradation and enabled new correlations to be highlighted. Although similar degradation patterns were revealed in the investigated objects–depletion of holocellulose, oxidation of lignin and some transformation of alum - a notable variability at the molecular level was highlighted. This is an important factor to be taken into account for the planning of re-treatment strategies of these extremely precious artefacts

No abstract