:Common inlet design for compound-channel flumes does not ensure a proper upstream discharge distribution. As the total head in the upstream tank is the same for both main-channel and floodplain subsections, the velocity in the upstream section is also the same in both subsections. The floodplain discharge is therefore too large and a mass transfer towards the main channel occurs along the flume. This note investigates how long a compound-channel flume must be to ensure that equilibrium between subsection discharges is achieved. The required length is found to be significant compared to the actual length of experimental flumes reported in the literature.
[1] This paper investigates 1-D modeling of nonuniform flows in compound channels. The issue is how to accurately predict both flow depth and mean velocity in the floodplain. A new model, called ''Independent Subsections Method'' (ISM), is presented here. Unlike classical 1-D models that solve a dynamic equation on the total cross section, the ISM estimates the water surface profile within each subsection. This enables the water level and the subsection mean velocities to be simultaneously calculated, without priority to any variable. In opposition to the Divided Channel Method (DCM), corrected DCM or the Exchange Discharge Model, the ISM assumes independent evolution of the discharge in each subsection of the compound channel. Indeed, this method does not assume equal head loss gradients in all subsections, and it does not impose the downstream discharge distribution. The ISM consists in a set of three coupled 1-D momentum equations (written within main channel, left-hand, and right-hand floodplains) and a mass conservation equation on the total cross section. Mass and momentum exchanges at the interfaces between subsections are explicitly accounted for. This method is validated against experimental data for developing flows in straight compound channel, flows in skewed compound channel, flows in a symmetric converging or diverging compound channel, and flows in an asymmetrical compound channel with an abrupt floodplain contraction. For the 46 runs, the ISM predicts flow depth and mean velocity in the floodplain with a maximum relative error of 8% and 19%, respectively. The ISM also appears to be a useful theoretical tool to improve our understanding of physical processes governing compound channel flows.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.