No abstract

To handle the fast-growing demand for high data rate applications, the capacity of cellular networks should be reinforced. However, the available radio resources in cellular networks are scarce, and their formulation is expensive. The state-of-the art solution to this problem is a new local networking technology known as the device-to-device (D2D) communication. D2D communications have great capability in achieving outstanding performance by reusing the existing uplink cellular channel resources. In D2D communication, two devices in close proximity can communicate directly without traversing data traffic through the evolved-NodeB (eNB). This results in a reduced traffic load to the eNB, reduced end-to-end delay, and improved spectral efficiency and system performance. However, enabling D2D communication in an LTE-Advanced (LTE-A) cellular network causes severe interference to traditional cellular users and D2D pairs. To maintain the quality of service (QoS) of the cellular users and D2D pairs and reduce the interference, we propose a distance-based resource allocation and power control scheme using fractional frequency reuse (FFR) technique. We calculate the system outage probability, total throughput and spectrum efficiency for both cellular users and D2D pairs in terms of their signal-to-interference-plus-noise ratio (SINR). Our simulation results show that the proposed scheme reduces interference significantly and improves system performance compared to the random resource allocation (RRA) and resource allocation (RA) without sectorization scheme.

Device-to-device (D2D) communications can be adopted as a promising solution to attain high quality of service (QoS) for a network. However, D2D communications generates harmful interference when available resources are shared with traditional cellular users (CUs). In this paper, network architecture for the uplink resource management issue for D2D communications underlaying uplink cellular networks is proposed. We develop a fractional frequency reuse (FFR) technique to mitigate interference induced by D2D pairs (DPs) to CUs and mutual interference among DPs in a cell. Then, we formulate a sum throughput optimization problem to achieve the QoS requirements of the system. However, the computational complexity of the optimization problem is very high due to the exhaustive search for a global optimal solution. In order to reduce the complexity, we propose a greedy heuristic search algorithm for D2D communications so as to find a sub-optimal solution. Moreover, a binary power control scheme is proposed to enhance the system throughput by reducing overall interference. The performance of our proposed scheme is analyzed through extensive numerical analysis using Monte Carlo simulation. The results demonstrate that our proposed scheme provides significant improvement in system throughput with the lowest computational complexity.

Device-to-device (D2D) communication is affirmed as one of the dynamic techniques in improving the network throughput and capacity and reducing traffic load to the evolved Node B (eNB). In this paper, we propose a resource allocation and power control technique in which two-pairs of D2D users can simultaneously share same uplink cellular resource. In this case, interference between D2D users and cellular users is no longer insignificant so it must be properly handled. The proposed scheme considers fractional frequency reuse (FFR) scheme as a promising method that can relatively reduce the intra-cell interference. The main objective of the proposed scheme is to maximize the D2D communication throughput and overall system throughput by minimizing outage probability. Hence, we formulate an outage probability problem and overall system throughput optimization problem while guaranteeing minimum allowable signal-to-interference-plus-noise ratio (SINR). For fair distribution of cellular resources to multiple D2D pairs, we used Jain's fairness index (JFI) method. Simulation is conducted in MATLAB and our simulation results demonstrate that the proposed scheme achieves remarkable system performance as compared with existing methods.

No abstract

In the last few years, multicast device-to-device (D2D) cellular networks has become a highly attractive area of research. However, a particularly challenging class of issues in this area is data traffic, which increases due to increase in video and audio streaming applications. Therefore, there is need for smart spectrum management policies. In this paper, we consider a fractional frequency reuse (FFR) technique which divides the whole spectrum into multiple sections and allows reusing of spectrum resources between the conventional cellular users and multicast D2D users in a non-orthogonal scenario. Since conventional cellular users and multicast D2D users shared same resources simultaneously, they generate severe data traffic and high communication overhead. To overcome these issues, in this paper we propose Lagrange relaxation technique to solve the non-convex problem and combinatorial auction-based matching algorithm to select the most desirable resource reuse partners by fulfilling the quality of service (QoS) requirements for both the conventional cellular users and multicast D2D users. Then, we formulate an optimization problem to maximize the overall system performance with least computational complexity. We demonstrate that our method can exploit a higher data rate, spectrum efficiency, traffic offload rate, coverage probability, and lower computational complexity.

No abstract

In peer-to-peer (P2P) lending, borrowers would access loans with lower interest rates than what they usually got from traditional lenders. People can directly borrow from the P2P platform with the rules that make them easy to borrow loans and invest free funds into P2P, which can benefit both borrowers and lenders. However, the easy way to borrow loans comes with risks. One of the major issues is that borrowers may default on the loan taken. In such cases, they can get loans quickly from P2P online platforms without any bank interferences. Thus, the lender can calculate his risk for loan default. In this project, we consider the P2P lending data to predict the loan default reassuring the lender to continue providing loans in the future. In our analysis, we consider the Logistic Regression, Naive Bayes, Random Forest, K Nearest Neighbour, and Decision tree to classify loan data based on their likelihood of default. The simulation result in our algorithm provides a significant accuracy of 94.6%.