To develop novel biorefinery concepts, the use of bio-based catalysts and solvents must be aligned with the principles of green chemistry. In this context, biogenic 2,5-furandicarboxylic acid (FDCA) is a very promising yet underused molecule with high potential for application as an acid catalyst, combining feasibility and sustainability with efficient and straightforward recovery. In this study, FDCA was evaluated as a catalyst in the recently developed OrganoCat pretreatment, a biphasic lignocellulose fractionation system. The catalyst was investigated for the efficient fractionation of the three main components-lignin, cellulose and noncellulosic sugars-with particular focus on the lignin quality, on the effect on enzymatic hydrolysis of the cellulosic residue, and on the noncellulosic sugar extraction. To address recovery of FDCA from the OrganoCat system, a method was developed, leading to the recovery of >97 % of FDCA with a spectroscopic purity of >99 %, maintaining full activity in consecutive runs.

Background: Biomass recalcitrance towards pretreatment and further processing can be related to the compositional and structural features of the biomass. However, the exact role and relative importance to those structural attributes has still to be further evaluated. Herein, ten different types of biomass currently considered to be important raw materials for biorefineries were chosen to be processed by the recently developed, acid-catalyzed OrganoCat pretreatment to produce cellulose-enriched pulp, sugars, and lignin with different amounts and qualities. Using wet chemistry analysis and NMR spectroscopy, the generic factors of lignocellulose recalcitrance towards OrganoCat were determined. Results: The different materials were processed applying different conditions (e.g., type of acid catalyst and temperature), and fractions with different qualities were obtained. Raw materials and products were characterized in terms of their compositional and structural features. For the first time, generic correlation coefficients were calculated between the measured chemical and structural features and the different OrganoCat product yields and qualities. Especially lignin-related factors displayed a detrimental role for enzymatic pulp hydrolysis, as well as sugar and lignin yield exhibiting inverse correlation coefficients. Hemicellulose appeared to have less impact, not being as detrimental as lignin factors, but xylan-O-acetylation was inversely correlated with product yield and qualities. Conclusion: These results illustrate the role of generic features of lignocellulosic recalcitrance towards acidic pretreatments and fractionation, exemplified in the OrganoCat strategy. Discriminating between types of lignocellulosic biomass and highlighting important compositional variables, the improved understanding of how these parameters affect OrganoCat products will ameliorate bioeconomic concepts from agricultural production to chemical products. Herein, a methodological approach is proposed.

The conversion of lignocellulose into its building blocks and their further transformation into valuable platform chemicals (e. g., furfural) are key technologies to move towards the use of renewable resources. This paper explored the disentanglement of lignocellulose into hemicellulose‐derived sugars, cellulose, and lignin in a biphasic solvent system (water/2‐methyltetrahydrofuran) using phosphoric acid as recyclable catalyst. Integrated with the biomass fractionation, in a second step hemicellulose‐derived sugars (mainly xylose) were converted to furfural, which was in situ extracted into 2‐methyltetrahydrofuran with high selectivity (70 %) and yield (56 wt %). To further increase the economic feasibility of the process, a downstream and recycling strategy enabled recovery of phosphoric acid without loss of process efficiency over four consecutive cycles. This outlines a more efficient and sustainable use of phosphoric acid as catalyst, as its inherent costs can be significantly lowered.