We report results on the first field-scale application of activated carbon (AC) amendment to contaminated sediment for in-situ stabilization of polychlorinated biphenyls (PCBs). The test was performed on a tidal mud flat at South Basin, adjacent to the former Hunters Point Naval Shipyard, San Francisco Bay, CA. The major goals of the field study were to (1) assess scale up of the AC mixing technology using two available, large-scale devices, (2) validate the effectiveness of the AC amendment at the field scale, and (3) identify possible adverse effects of the remediation technology. Also, the test allowed comparison among monitoring tools, evaluation of longer-term effectiveness of AC amendment, and identification of field-related factors that confound the performance of in-situ biological assessments. Following background pretreatment measurements, we successfully incorporated AC into sediment to a nominal 30 cm depth during a single mixing event, as confirmed by total organic carbon and black carbon contents in the designated test plots. The measured AC dose averaged 2.0-3.2 wt% and varied depending on sampling locations and mixing equipment. AC amendment did not impact sediment resuspension or PCB release into the water column over the treatment plots, nor adversely impactthe existing macro benthic community composition, richness, or diversity. The PCB bioaccumulation in marine clams was reduced when exposed to sediment treated with 2% AC in comparison to the control plot Field-deployed semi permeable membrane devices and polyethylene devices showed about 50% reduction in PCB uptake in AC-treated sediment and similar reduction in estimated pore-water PCB concentration. This reduction was evident even after 13-month post-treatment with then 7 months of continuous exposure, indicating AC treatment efficacy was retained for an extended period. Aqueous equilibrium PCB concentrations and PCB desorption showed an AC-dose response. Field-exposed AC after 18 months retained a strong stabilization capability to reduce aqueous equilibrium PCB concentrations by about 90%, which also supports the long-term effectiveness of AC in the field. Additional mixing during or after AC deployment, increasing AC dose, reducing AC-particle size, and sequential deployment of AC dose will likely improve AC-sediment contact and overall effectiveness. The reductions in PCB availability observed with slow mass transfer under field conditions calls for predictive models to assess the long-term trends in pore-water PCB concentrations and the benefits of alternative in-situ AC application and mixing strategies.
Metalloporphyrins are exceedingly useful building blocks for the design and synthesis of molecularly based solids. The use of hydrogen bonding or metal ion coordination provides a wide range of framework solids. Using various polyfunctionalized porphyrins, we have created porous solids that are thermally robust and that retain their internal porosity upon loss of solvates. Their pore dimensions are comparable to zeolites, and they show shape and size selectivity in sorption of guest molecules and in epoxidation of alkenes.
A robust microporous zinc(II) metalloporphyrin framework solid has been synthesized. The proposed structural model developed from X-ray single crystal data has an interpenetrated three-dimensional framework of zinc trans-biscarboxylate tetraarylporphyrins whose carboxylates coordinate the six edges of tetrahedral Zn(4)O(6+) clusters, maintaining a charge-neutral framework. This cubic framework has 74% free volume and 4 x 7 A pores. N(2) adsorption gives a type I isotherm with a surface area of 800 m(2)/g, which is greater than that of a typical zeolite. Experimental evidence indicates that the interpenetrated frameworks of the evacuated solid remain intact and retain a microporous structure. This is a versatile framework system: alteration of the metal in the porphyrin may create a catalytically active solid, and modification of the 10-, 20-substituents of the porphyrin can provide control over both the polarity and the size of the pores.
A review of the recent literature is presented which assesses the development of robust microporous porphyrin framework solids and their potential to perform selective sorption or heterogeneous shape- or size-selective catalysis. The review focuses only on those porphyrin solids whose porosity is robust, i.e. whose framework remains after the removal of solvates, as determined by thermal gravimetric analysis (TGA), X-ray powder diffraction (XRD), or gas adsorption studies. Eleven such robust porphyrin framework solids are presented.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.