ResumoAs amostras de esmectita do estado do Pará, Amazônia, Brasil foram caracterizadas utilizando XRD, 27 Al MAS NMR, FTIR e análise textural por curvas isotérmicas de adsorção-dessorção de nitrogênio. Na produção das argilas pilarizadas foi usado como íon intercalante, o Al 13 (o íon de keggin), obtido pela reação das soluções AlC l3 6H 2 O/NaOH, com razão molar OH/Al=2. Foram adotadas as proporções (Al/Argila): 5, 10, 20 e 25 meq/g de argila, com intercalação em 25 o C, durante as 3 h e calcinada a 450 o C (temperatura adequada da calcinação). O resultado mostrou que o processo de pilarização aumentou o espaçamento basal da argila natural de 14,02 para 18,84 Å e a área superficial de 44,30 para 198,03 m 2 /g (Al/Argila=25meq/g de argila, pH=4). O material preparado com relação Al/Argila=25meq/g de argila mostrou a incorporação máxima de Al. A estabilidade térmica da argila natural foi melhorada pelo procedimento de pilarização. Palavras-chave: argila pilarizada, Al 13 , esmectita. AbstractSmectite-type clays from the state of Pará, Brazil, were characterized by XRD, 27 Al MAS NMR, FTIR and textural analysis by nitrogen adsorpition-desorption isotherms. In the production of pillared clays, the Al 13 ion (keggin's ion) was used. This ion was obtained by the reaction of AlC l3 6H 2 O/NaOH solutions with OH/Al=2 molar ratio and with Al/clay ratios of 5, 10, 15, 20, 25 meq/g of clay, intercalated at 25 o C during 3 h and calcined at 450 o C (adequate temperature for calcination). The results showed that the pillarization process increased the basal spaces of the natural clay from 14.02 to 18.84 Å and the surface area from 44.30 to 198.03 m 2 /g (Al/g of clay = 25 meq/g of clay, pH=4). Materials prepared with different Al/g clay ratio showed the maximum Al incorporation for Al/g of clay = 25 meq/g of clay. The thermal stability of the natural clay was improved by the pillaring procedure.
Recebido em 26/6/07; aceito em 10/8/07; publicado na web em 26/2/08 APPLICATION OF Zr/Ti-PILC IN THE ADSORPTION PROCESS OF Cu(II), Co(II) and Ni(II) USING ADSORPTION PHYSICO-CHEMICAL MODELS AND THERMODINAMICS OF THE PROCESS. The aim of this investigation is to study how Zr/Ti-PILC adsorbs metals. The physico-chemical proprieties of Zr/Ti-PILC have been optimized with pillarization processes and Cu(II), Ni(II) and Co(II) adsorption from aqueous solution has been carried out, with maximum adsorption values of 8.85, 8.30 and 7.78 x10 -1 mmol g -1 , respectively. The Langmuir, Freundlich and Temkin adsorption isotherm models have been applied to fit the experimental data with a linear regression process. The energetic effect caused by metal interaction was determined through calorimetric titration at the solid-liquid interface and gave a net thermal effect that enabled the calculation of the exothermic values and the equilibrium constant.Keywords: adsorption isotherms; metals; Zr/Ti -pillared clay. INTRODUÇÃOA adsorção de metais por superfícies minerais é um processo reconhecidamente importante que controla a biodisponibilidade dos metais em ambientes aquáticos [1][2][3][4][5][6][7][8][9] . O tratamento clássico de efluentes contendo metais envolve processos físico-químicos de precipitação, troca iônica, adsorção e extração por solventes, sendo mais utilizado o de precipitação, que é inadequado no tratamento de grandes volumes de efluentes, devido à baixa eficiência e elevados custos 10 . Neste caso, é mais recomendado o uso de recursos naturais sem tratamento prévio, como solos argilosos ferruginosos ricos em substân-cias húmicas 11 e, também, materiais naturais quimicamente modificados, como exemplos zeólitas naturais impregnadas com materiais magnéticos 12,13 e argilas modificadas por processo de pilarização ou intercalação. Tais materiais se enquadram no grupo de materiais porosos, desenvolvidos pela engenharia de materiais, com ampla aplicação em catálise heterogênea 14 e como adsorventes [15][16][17][18][19][20][21] .Com a evolução das pesquisas em busca de novos materiais que fossem utilizados como adsorventes, surgiram os materiais meso e microporosos, em particular as zeólitas ou peneiras moleculares, que atuam efetivamente com alto poder adsortivo, provocado por suas propriedades texturais. No decorrer do avanço das pesquisas surgiram as argilas pilarizadas com diversos polioxicátions, que produziram resultados satisfatórios em processos de adsorção. Vários metais pesados foram testados em meio líquido com adsorventes minerais quimicamente modificados, sendo que os resultados obtidos mostraram que as argilas pilarizadas são bastante eficientes em processos de adsorção 9-13 . Diversos estudos comprovam a eficiência das argilas em processos adsortivos e catalíticos, sendo que as argilas mais comumente empregadas em estudos de adsorção pertencem ao grupo da esmectita, principalmente a montmorilonita [14][15][16][17][18] .Estudos de adsorção de cobre realizados com amostras de esmectitas pilarizadas com pilare...
Amostras de esmectitas oriundas do estado do Pará, região amazônica, Brasil, foram usadas em processo de pilarização no presente estudo. As matrizes pilarizadas e natural foram caracterizadas usando DRX e analise textural usando isotermas de adsorção-desorção de nitrogênio. Os íons de intercalação (Al13, Ti, Zr) foram obtidos através de reações químicas com soluções de AlCl(3)6H2O/ NaOH, etoxido de titânio/HCl, acetato de zircônio / HCl. Os resultados obtidos com o processo de pilarização apresentaram aumento do espaçamento basal de 15,6 para 20, 64 Å e área superficial de 44 para 358 m²/g (Zr-PILC). A estabilidade térmica da argila natural foi melhorada com o processo de pilarização. O material resultante foi submetido a um processo catalítico de decomposição do óleo de andiroba em um reator de leito fixo a 673 ± 1 K. A atividade catalítica foi determinada pelo produto de decomposição resultante da reação química. Os parâmetros físico-químicos foram obtidos usando DRX, FTIR e análise textural. As argilas pilarizadas apresentaram alta acidez de Brønsted, com alta concentração de hidrocarbonetos aromáticos e baixa concentração de hidrocarbonetos alifáticos.
Amostra de esmectita pertencente a Serra de Maicuru (Estado do Pará, Norte do Brasil, região amazônica) foi pilarizada com Al13, A Argila pilarizada com alumínio (Al-PILC) foi caracterizada por DRX, MEV e EDS. Para a análise textural foram utilizadas isotermas de adsorção-desorção utilizando o nitrogênio. Este artigo é dirigido ao estudo da adsorção de metais pesados. A adsorção dos íons de Cu2+, Ni2+e Co2+ foi realizadas com a matriz Al-PILC em temperatura ambiente com soluções aquosas contendo os íons metálicos. Os modelos de adsorção adotados foram os de Langmuir, Freundlich e Temkin que foram aplicados aos valores obtidos experimentalmente com regressão linear. A equação de Langmuir foi o melhor modelo de linearização com r = 0,999. A equação de Freundlich apresentou limitações em altas concentrações, mas foram obtidos valores (Kf e n) bastante aceitáveis utilizando este modelo. Os parâmetros foram utilizados para calcular a quantidade de Nf em função de Cs.
2/g para 188,72 m 2 /g. A estabilidade térmica da argila natural foi otimizada com o processo de pilarização. Palavras-chave: titânio-argila pilarizada, intercalação, esmectita. Abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.