An anisotropic thermally conductive film with tailorable microstructures and macroproperties is fabricated using a layer-by-layer (LbL) assembly of graphene oxide (GO) and nanofibrillated cellulose (NFC) on a flexible NFC substrate driven by hydrogen bonding interactions, followed by chemical reduction process. The resulting NFC/reduced graphene oxide (RGO) hybrid film reveals an orderly hierarchical structure in which the RGO nanosheets exhibit a high degree of orientation along the in-plane direction. The assembly cycles dramatically increase the in-plane thermal conductivity (λ) of the hybrid film to 12.6 W·m·K, while the cross-plane thermal conductivity (λ) shows a lower value of 0.042 W·m·K in the hybrid film with 40 assembly cycles. The thermal conductivity anisotropy reaches up to λ/λ = 279, which is substantially larger than that of similar polymeric nanocomposites, indicating that the LbL assembly on a flexible NFC substrate is an efficient technique for the preparation of polymeric nanocomposites with improved heat conducting property. Moreover, the layered hybrid film composed of 1D NFC and 2D RGO exhibits synergetic mechnical properties with outstanding flexibility and a high tensile strength (107 MPa). The combination of anisotropic thermal conductivity and superior mechanical performance may facilitate the applications in thermal management.

The nanofibrillated cellulose/graphene nanosheet hybrid films possessed significantly anisotropic thermal conductivities. The anisotropy originated from the alignment of graphene nanosheets, which can lead to different thermal resistances along the in-plane and through-plane directions.

Nanopapers containing cellulose nanofibrils (CNFs) are an emerging and sustainable class of high performance materials. The diversification and improvement of the mechanical and functional property space critically depend on integration of CNFs with rationally designed, tailor-made polymers following bioinspired nanocomposite designs. Here we combine for the first time CNFs with colloidal dispersions of vitrimer nanoparticles (VP) into mechanically coherent nanopaper materials. Vitrimers are permanently cross-linked polymer networks that undergo temperature-induced bond shuffling through an associative mechanism and which allow welding and reshaping on the macroscale. The choice of low glass transition, hydrophobic vitrimers derived from fatty acids and polydimethylsiloxane (PDMS), and achieving dynamic reshuffling of cross-links through transesterification reactions enables excellent compatibility and covalent attachment onto the CNF surfaces. Moreover, the resulting films are ductile, stretchable and offer high water resistance. The success of imparting the vitrimeric polymeric behavior into the nanocomposite, as well as the curing mechanism of the vitrimer, is highlighted through thorough analysis of structural and mechanical properties. The dynamic exchange chemistry of the vitrimers enables efficient welding of two nanocomposite parts as characterized by good bonding strength during single lap shear tests. In the future, we expect that the dynamic character of vitrimers becomes a promising option for the design of mechanically adaptive bioinspired nanocomposites and for shaping and reshaping such materials.

A generic, facile, and waterborne strategy is introduced to fabricate flexible, low‐cost nanocomposite films with room‐temperature phosphorescence (RTP) by incorporating waterborne RTP polymers into self‐assembled bioinspired polymer/nanoclay nanocomposites. The excellent oxygen barrier of the lamellar nanoclay structure suppresses the quenching effect from ambient oxygen (kq) and broadens the choice of polymer matrices towards lower glass transition temperature (Tg), while providing better mechanical properties and processability. Moreover, the oxygen permeation and diffusion inside the films can be fine‐tuned by varying the polymer/nanoclay ratio, enabling programmable retention times of the RTP signals, which is exploited for transient information storage and anti‐counterfeiting materials. Additionally, anti‐interception materials are showcased by tracing the interception‐induced oxygen history that interferes with the preset self‐erasing time. Merging bioinspired nanocomposite design with RTP materials contributes to overcoming the inherent limitations of molecular design of organic RTP compounds, and allows programmable temporal features to be added into RTP materials by controlled mesostructures. This will assist in paving the way for practical applications of RTP materials as novel anti‐counterfeiting materials.

Metrics & MoreArticle RecommendationsCONSPECTUS: Nature provides abundant inspiration and elegant paradigms for the development of smart materials that can actuate, morph, and move on demand. One remarkable capacity of living organisms is to adapt their shapes or positions in response to stimuli. Programmed deformations or movements in plant organs are mainly driven by water absorption/dehydration of cells, while versatile motions of mollusks are based on contraction/extension of muscles. Understanding the general principles of these morphing and motion behaviors can give rise to disruptive technologies for soft robotics, flexible electronics, biomedical devices, etc. As one kind of intelligent material, hydrogels with high similarity to soft biotissues and diverse responses to external stimuli are an ideal candidate to construct soft actuators and robots. The objective of this Account is to give an overview of the fundamental principles for controllable deformations and motions of hydrogels, with a focus on the structure designs and responsive functions of the corresponding soft actuators and robots. This field has been rapidly developed in recent years with a growing understanding of working principles in natural organisms and a substantial revolution of manufacturing technologies to devise bioinspired hydrogel systems with desired structures. Diverse morphing hydrogels and soft actuators/robots have been developed on the basis of several pioneering works, ranging from bending and folding deformations of bilayer hydrogels to self-shaping of non-Euclidean hydrogel surfaces, and from thermoactuated bilayer gel "hands" to electrodriven polyelectrolyte gel "worms". These morphing hydrogels have demonstrated active functions and versatile applications in biomedical and engineering fields.In this Account, we discuss recent progress in morphing hydrogels and highlight the design principles and relevant applications. First, we introduce the fundamentals of basic deformation modes, together with generic structure features, actuation strategies, and morphing mechanisms. The advantages of in-plane gradient structures are highlighted for programmable deformations by harnessing the out-of-plane buckling with bistability nature to obtain sophisticated three-dimensional configurations. Next, we give an overview of soft actuators and robots based on morphing hydrogels and focus on the working principles of the active systems with different structure designs. We discuss the advancements of hydrogel-based soft robots capable of swift locomotion with different gaits and emphasize the significances of structure control and dynamic actuation. Then we summarize versatile applications of hydrogel-based actuators and robots in biomedicines, cargo delivery, soft electronics, information encryption, and so forth. Some hydrogel robots with a built-in feedback loop and self-sensing system exhibit collaborative functions and advanced intelligence that are informative for the design of next-generation hydrogel machines. Finally, concluding ...

Cellulose nanofibrils (CNFs) are attractive, renewable building blocks for high-performance and lightweight nanocomposites of high sustainability. Following bioinspired design principles, meaning the organization of large fractions of reinforcing CNFs in a minority matrix of suitably designed polymers, promises the best mechanical performance. However, thus far, truly synergetic mechanical behavior in such nanocompositesas often found in biological load-bearing tissueswith a simultaneous increase of stiffness, toughness, and strength have remained elusive. Here we describe such a system realizing outstanding synergies in the relevant mechanical performance indicators by combining anionic TEMPO-oxidized CNFs with a self-cross-linkable PU resin. Strikingly, appropriate counterion selection, that is, an exchange of the commonly used sodium to the large tetrabutyl ammonium, turns out to be of key importance to tailor the interaction between the components in a suitable fashion. Ultimately, at only 10 wt % of PU, the cured nanocomposites achieve twice as high stiffness, yield strength, toughness, and strength than a pure CNF nanopaper, allowing the nanocomposites to reach close to 20 GPa in stiffness, 450 MPa in tensile strength at ca. 14% strain. The resulting materials are located in previously completely unoccupied territories in mechanical properties for waterborne CNF/polymer nanocomposites. The study shows that subtle engineering of interactions and attractive PUs containing various noncovalent interaction motifs provide unforeseen opportunities in reaching remarkable mechanical property areas in bioinspired nanocomposites which are promising in applications for future lightweight high-performance sustainable materials.

We demonstrate waterborne, unimolecularly dissolved vitrimer prepolymer systems that can be transferred into a vitrimer material using catalytic transesterification. The one-component prepolymer system can be processed via film casting and subsequent heat-induced cross-linking. A variation of the density of side chain hydroxy groups over ester and amide groups in the methacrylate/methacrylamide backbone, as well as of the Lewis acid catalyst loading, allow control of the extent of cross-linking and exchange rates. The increase of the amount of both catalyst and hydroxy groups leads to an acceleration of the relaxation times and a decrease of the activation energy of the transesterification reactions. The system features elastomeric properties, and the tensile properties are maintained after two recycling steps. Thus far, vitrimers have been limited largely to hydrophobic polymers; this system is a step forward toward waterborne, one-component materials, and we demonstrate its use in waterborne bioinspired nanocomposites.

Metrics & MoreArticle Recommendations CONSPECTUS: Bioinspired materials engineering impacts the design of advanced functional materials across many domains of sciences from wetting behavior to optical and mechanical materials. In all cases, the advances in understanding how biology uses hierarchical design to create failure and defect-tolerant materials with emergent properties lays the groundwork for engaging into these topics. Biological mechanical materials are particularly inspiring for their unique combinations of stiffness, strength, and toughness together with lightweightness, as assembled and grown in water from a limited set of building blocks at room temperature. Wood, nacre, crustacean cuticles, and spider silk serve as some examples, where the correct arrangement of constituents and balanced molecular energy dissipation mechanisms allows overcoming the shortcomings of the individual components and leads to synergistic materials performance beyond additive behavior. They constitute a paradigm for future structural materials engineering in the formation process, the use of sustainable building blocks and energy-efficient pathways, as well as in the property profiles that will in the long term allow for new classes of high-performance and lightweight structural materials needed to promote energy efficiency in mobile technologies. This Account summarizes our efforts of the past decade with respect to designing self-assembling bioinspired materials aiming for both mechanical high-performance structures and new types of multifunctional property profiles. The Account is set out to first give a definition of bioinspired nanocomposite materials and self-assembly therein, followed by an in-depth discussion on the understanding of mechanical performance and rational design to increase the mechanical performance. We place a particular emphasis on materials formed at high fractions of reinforcements and with tailor-made functional polymers using self-assembly to create highly ordered structures and elucidate in detail how the soft polymer phase needs to be designed in terms of thermomechanical properties and sacrificial supramolecular bonds. We focus on nanoscale reinforcements such as nanoclay and nanocellulose that lead to high contents of internal interfaces and intercalated polymer layers that experience nanoconfinement. Both aspects add fundamental challenges for macromolecular design of soft phases using precision polymer synthesis. We build upon those design criteria and further develop the concepts of adaptive bioinspired nanocomposites, whose properties are switchable from the outside using molecularly defined triggers with light. In a last section, we discuss how new types of functional properties, in particular flexible and transparent gas barrier materials or fire barrier materials, can be reached on the basis of the bioinspired nanocomposite design strategies. Additionally, we show new types of self-assembled photonic materials that can even be evolved into self-assembling lasers, hence moving the c...