Designing 3D printed micro-architectures using electronic materials with well-understood electronic transport within such structures will potentially lead to accessible device fabrication for 'on-demand' applications. Here we show controlled nozzle-extrusion based 3D printing of a commercially available nano-composite of graphene/polylactic acid, enabling the fabrication of a tensile gauge functioning via the readjustment of the electron-tunneling barrier width between conductive graphene-centers. The electronic transport in the graphene/polymer 3D printed structure exhibited the Fowler Nordheim mechanism with a tunneling width of 0.79-0.95 nm and graphene centers having a carrier concentration of 2.66 × 10 12 /cm 2. Furthermore, a mechanical strain that increases the electrontunneling width between graphene nanostructures (~ 38 nm) by only 0.19 Ǻ reduces the electron flux by 1e/s/nm 2 (from 18.51 to 19.51 e/s/nm 2) through the polylactic acid junctions in the 3D-printed heterostructure. This corresponds to a sensitivity of 2.59 Ω/Ω%, which compares well with other tensile gauges. We envision that the proposed electron-tunneling model for conductive 3D-printed structures with thermal expansion and external strain will lead to an evolution in the design of nextgeneration of 'on-demand' printed electronic and electromechanical devices.
Solution co-deposition of two-dimensional (2D) nanosheets with chemical solutes yields nanosheet–molecular heterostructures. A feature of these macroscopic layered hybrids is their ability to release the intercalated molecular agent to express chemical functionality on their surfaces or in their near surroundings. Systematic design methods are needed to control this molecular release to match the demand for rate and lifetime in specific applications. We hypothesize that release kinetics are controlled by transport processes within the layered solids, which primarily involve confined molecular diffusion through nanochannels formed by intersheet van der Waals gaps. Here a variety of graphene oxide (GO)/molecular hybrids are fabricated and subject to transient experiments to characterize release kinetics, locations, and mechanisms. The measured release rate profiles can be successfully described by a numerical model of internal transport processes, and the results used to extract effective Z-directional diffusion coefficients for various film types. The diffusion coefficients are found to be 8 orders of magnitude lower than those in free solution due to nanochannel confinement and serpentine path effects, and this retardation underlies the ability of 2D materials to control and extend release over useful time scales. In-plane texturing of the heterostructured films by compressive wrinkling or crumpling is shown to be a useful design tool to control the release rate for a given film type and molecular intercalant. The potential of this approach is demonstrated through case studies on the controlled release of chemical virucidal agents.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.