Purpose In the long-term network operation, the power distribution network will be subjected to the effects of ultra-high voltage, strong electromagnetic interference and harsh natural environment on the power system, which will lead to the occurrence of different faults in the distribution network and directly affect the normal operation of the power grid. Design/methodology/approach The purpose of this study is to solve the problems of labor intensity, high risk and low efficiency of distribution network manual maintenance operation, this paper proposed a new configuration of the live working robot for distribution network maintenance, the robot is equipped with dual working arms through the mobile platform, which can realize the coordination movement, the autonomous reorganization and replacement of the end tools, respectively, so as the robot power distribution maintenance function such as stripping, trimming, wiring and the operation control problem of the distribution network-robot with small arms and in small operation space can be realized. Findings To effective elimination or reduce the adverse effects of the internal forces in the closed chain between the working object and manipulator under the typical task of the 10 kV distribution network, this paper has established the robot coordinated control dynamics model in the closed-chain between the dual-working object and proposed the dynamic distribution method of closed-chain internal force and the effectiveness has been proved by simulation experiments and 10 kV field operation. Originality/value The force-position hybrid control can realize the mutual compensation of force and position so as to effectively reduce the internal force in the closed chain. Finally, the engineering practicality of the method is verified by field operation experiment, the effective implementation of this control method greatly improves the robot working efficiency and the operation reliability, the promotion and application of the control method have great theoretical and practical value and maintenance management system, so as to achieve automation of electric.
This study focuses on the influences of a warm high-pressure meteorological system on aerosol pollutants, employing the simulations by the Models-3/CMAQ system and the observations collected during October [10][11][12] 2004, over the Pearl River Delta (PRD) region. The results show that the spatial distributions of air pollutants are generally circular near Guangzhou and Foshan, which are cities with high emissions rates. The primary pollutant is particulate matter (PM) over the PRD. MM5 shows reasonable performance for major meteorological variables (i.e., temperature, relative humidity, wind direction) with normalized mean biases (NMB) of 4.5-38.8% and for their time series. CMAQ can capture one peak of all air pollutant concentrations on October 11, but misses other peaks. The CMAQ model systematically underpredicts the mass concentrations of all air pollutants. Compared with chemical observations, SO 2 and O 3 are predicted well with a correlation coefficient of 0.70 and 0.65. PM 2.5 and NO are significantly underpredicted with an NMB of 43% and 90%, respectively. The process analysis results show that the emission, dry deposition, horizontal transport, and vertical transport are four main processes affecting air pollutants. The contributions of each physical process are different for the various pollutants. The most important process for PM 10 is dry deposition, and for NO x it is transport. The contributions of horizontal and vertical transport processes vary during the period, but these two processes mostly contribute to the removal of air pollutants at Guangzhou city, whose emissions are high. For this high-pressure case, the contributions of the various processes show high correlations in cities with the similar geographical attributes. According to the statistical results, cities in the PRD region are divided into four groups with different features. The contributions from local and nonlocal emission sources are discussed in different groups.Implications: The characteristics of aerosol pollution episodes are intensively studied in this work using the high-resolution modeling system MM5/SMOKE/CMAQ, with special efforts on examining the contributions of different physical and chemical processes to air concentrations for each city over the PRD region by a process analysis method, so as to provide a scientific basis for understanding the formation mechanism of regional aerosol pollution under the high-pressure system over PRD.
Power transmission line live working robots are important equipment and useful exploration to ensure the reliable operation of high-voltage lines and they are the development trend to realizing intelligent automation power system operation and maintenance management. At present, most robots adapt lithium battery power supply and can be hoisted on line. The robot online endurance operation time is closely related to the system energy consumption. When the robot electricity of battery is insufficient, it needs to be charged offline. In order to reduce the frequency of robot hoisted on and off line as much as possible and improve the robot battery life time after it has been online, this has become a key technology which needs to be solved urgently. It is of great theoretical significance and practical application value to promote the robot overall operation efficiency. Based on the above, this paper establishes double different types manipulator energy consumption models for high-voltage transmission line damper replacement operation and drainage plate maintenance operation, through analysis and synthesis, a general energy consumption model for different tasks have been abstracted and an objective function for optimizing the robot manipulator motion energy consumption have been constructed based on the robot dynamics, thereby, GA(genetic algorithm) has been adapted, through selecting appropriate algorithm parameters, the optimal manipulator energy consumption has been solved and then it can be substituted back to the manipulator energy consumption model so as to obtain the optimal joint energy consumption motion function, based on the optimal energy consumption results, the optimal robot energy consumption motion planning has been carried out, according to the MATLAB simulation results, the energy consumption of the optimized trajectory is significantly lower than before, which can effectively reduce the frequency the robot hoisted online and offline, so as to improve the robot operation overall efficiency, at the same time, the optimal energy consumption trajectory planning method has strong versatility for different operation tasks. Finally, based on the optimal energy consumption trajectory planning, the robot drainage board tightening and damper replacement operation experiments on 220 kV power lines which verified the effectiveness and engineering practicability of the proposed method.
Purpose In the multi-splitting transmission lines extreme power environment of ultra-high voltage and strong electromagnetic interference, to improve the trajectory tracking and stability control performance of the robot manipulator when conduct electric power operation, and effectively reduce the influence of disturbance factors on the robot motion control, this paper aims to presents a robust trajectory tracking motion control method for power cable robot manipulators based on sliding mode variable structure control theory. Design/methodology/approach Through the layering of aerial-online-ground robot three-dimensional control architecture, the robot joint motion dynamic model has been built, and the motion control model of the N-degrees of freedom robot system has also been obtained. On this basis, the state space expression of joint motion control under disturbance and uncertainty has been also derived, and the manipulator sliding mode variable structure trajectory tracking control model has also been established. The influence of the perturbation control parameters on the robot motion control can be compensated by the back propagation neural network learning, the stability of the controller has been analyzed by using Lyapunov theory. Findings The robot has been tested on a analog line in the lab, the effectiveness of sliding mode variable structure control is verified by trajectory tracking simulation experiments of different typical signals with different methods. The field operation experiment further verifies the engineering practicability of the control method. At the same time, the control method has the remarkable characteristics of sound versatility, strong adaptability and easy expansion. Originality/value Three-dimensional control architecture of underground-online-aerial robots has been proposed for industrial field applications in the ubiquitous power internet of things environment (UPIOT). Starting from the robot joint motion, the dynamic equation of the robot joint motion and the state space expression of the robot control system have been established. Based on this, a robot closed-loop trajectory tracking control system has been designed. A robust trajectory tracking motion control method for robots based on sliding mode variable structure theory has been proposed, and a sliding mode control model for the robot has been constructed. The uncertain parameters in the control model have been compensated by the neural network in real-time, and the sliding mode robust control law of the robot manipulator has been solved and obtained. A suitable Lyapunov function has been selected to prove the stability of the system. This method enhances the expansibility of the robot control system and shortens the development cycle of the controller. The trajectory tracking simulation experiment of the robot manipulator proves that the sliding mode variable structure control can effectively restrain the influence of disturbance and uncertainty on the robot motion stability, and meet the design requirements of the control system with fast response, high tracking accuracy and sound stability. Finally, the engineering practicability and superiority of sliding mode variable structure control have been further verified by field operation experiments.
Purpose The purpose of this study is to solve the key technical problems of the practical application of electric robots. The UHV multi-split transmission line power cable operation robot is an important equipment to ensure the reliable operation of high voltage lines and is a useful exploration to realize high-quality power transmission. As the robot system platform equipment mature and operation environment gradually become more complex, the double arm coordination motion control in extreme environment becomes one of the main bottleneck for its practical in power system. Design/methodology/approach This paper summarizes the key technologies related to power cable robots, and aims at key technical indicators such as operation reliability, operation efficiency and operation quality in the robot’s practical process. The dynamic evolution mechanism of the robot’s mechanical configuration, the multi-physics information fusion algorithm in extreme environments, the robot’s autonomous positioning and its error compensation control, the robot’s robust motion control in extreme environments and the dual-arm force-position hybrid coordination control and the dynamic distribution and elimination mechanism of internal forces in the closed chain between robots and operating objects, all the research methods and solutions of the key technologies are proposed, respectively. Findings Finally, a new control architecture for power cable robots in the background of the Ubiquitous Power Internet of Things is proposed so as to manage the operation and maintenance of electric power systems. The above key technologies are a new exploration of the operation and maintenance management of EHV (Extra High Voltage) multi-split transmission lines which have laid a solid theoretical foundation for the power cable robot. Originality/value High voltage transmission line is the main channel of power transmission. It is an important means to improve the integration of operation and maintenance management of power system to use robot instead of manual inspection and maintenance of power line, in the promotion and application of electric robot. The authors pay attention to the practicability, and the breakthrough of key technologies of robot is the premise of the practicability of robot. In this paper, the robot operation and control in multi-task and complex scenes are studied. The research and implementation of the main key technologies, such as the dynamic evolution mechanism of robot configuration, the coupling and fusion law of multi physical fields in the extreme electric power environment, the autonomous positioning control of manipulator, the robust control of robot in the super electromagnetic field environment and the cooperative operation control of multi manipulator, are discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.