Purpose The purpose of this study is to increase the wear resistance of Mg alloy by adding hard ceramic particles to it. The inclusion of hard ceramic particles further strengthen the Mg alloy, resulting in higher wear resistance. Mg alloys containing Zn, rare earth and Zr exhibit high specific strength and excellent creep resistance, making them suitable for aerospace components such as aircraft gearboxes and generator housings. Design/methodology/approach In the present study, composites have been produced in situ by using RZ5 mg alloy as matrix and TiC as reinforcement by self-propagating high-temperature synthesis technique. The abrasive wear behavior of RZ5 Mg alloy matrix reinforced with TiC particulates has also been examined. The pin-on-disc apparatus has been used for the tests. The abrasive paper is used as a counter body, and the results are obtained by changing sliding distance and applied load. Findings A notable enhancement in the wear resistance and mechanical properties of tested composite has been observed as compared to the RZ5 Mg alloy as a matrix. There is a uniform increment in the change in weight loss of RZ5-TiC composite with increasing sliding distance and applied load, but it decreases with increasing TiC content. The coefficient of friction (µ) also decreases uniformly with an increase in the reinforcement of TiC, but it decreases with an increase in applied load and sliding distance. The investigation of the worn composite, which determines dominant wear mechanisms as abrasion and plowing grooves on tested samples, has been done using field emission scanning electron microscopy. Originality/value The current manuscript provides a detailed abrasive wear analysis of RZ5-TiC composite by using different wear parameters. Specifically, extensive experimental data have been provided for RZ5-TiC composite. The effects of parameters such as applied load, sliding distance and Wt.% of TiC on the weight loss and coefficient of friction of the composites have been analyzed and discussed thoroughly.
Purpose The advancement in modern manufacturing technology generated the need to develop new materials for better wear resistance. The purpose of this paper is to use the Taguchi optimization approach to examine which wear parameter significantly affects weight loss and coefficient of friction for RZ5-TiC composite. It is a simple and efficient method to find performance of wear parameter using minimum experimental runs. Design/methodology/approach RZ5-TiC composites were prepared using RZ5 as matrix, reinforced with TiC through self-propagating high-temperature synthesis technique. In the present work, an attempt has been made to study the influence of wear parameters like applied load (AL), sliding distance (SD) and Wt.% of TiC (WTC) on responses like weight loss and coefficient of friction of RZ5/TiCp composites. The pin-on-disc apparatus used to conduct abrasive wear test. The wear process parameters are optimized for minimum wear based on L27 Taguchi orthogonal design. The Taguchi technique using design of experiments (DOE) is used to obtain the data. The ANOVA and an orthogonal array are used to examine the influence of wear parameters on responses. The purpose is to examine parametric significances which affect responses. Findings It observed that wear parameters have the significant influence on responses of RZ5/TiCp composites. The interaction of sliding distance/Wt.% of TiC is observed and found significant influence on both responses. The optimum level of the significant wear parameters is achieved based on the maximum S/N ratio for RZ5/TiCp composites. The optimal interaction for weight loss and coefficient of friction is AL1-SD1-WTC3 and AL3-SD1-WTC3, respectively. Finally, the confirmation test is conducted and the results are obtained within the confidence interval. Originality/value The current manuscript provides an optimization of wear parameters using Taguchi approach. The extensive experimental data are used for this purpose and effects of wear parameters on responses are analyzed from the presented results. The results obtained are useful in improving the wear resistance of the RZ5-TiC composite.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.