The applications of lightweight planar parallel robotic manipulators are increasing enormously because of its various desirable characteristics such as low weight, lower inertia and higher stiffness. Higher accelerations and accuracies can be achieved in planar parallel manipulators. Also, shape memory alloy restoration technique (SMART)-based linear actuators are replacing huge and bulky linear actuators. This study presents the kinematic design of smart linearly actuated family of U-shape base planar parallel robotic manipulator. With the aid of solid modelling software, different available configurations were modelled and their workspace was analysed. The developed 3-DOF motion stages (18 unique configurations) were fabricated using fused deposition modelling process, and the top three configurations having higher workspace were further experimented. It is interesting to observe that the actual or experimental workspace of a particular manipulator configuration is further minimised from the predicted or feasible workspace. It is due to the presence of passive links, singularities, friction between the parts, heat dissipation, force distribution, stiffness, etc. The present study depicts the experimental workspace of the top three configurations, namely PPR-PRP-PRR, PRP-PPR-PRP and PRP-PPR-PRR. Since none of the experimental workspace observed is equal or higher than the model workspace, an efficiency loss in terms of workspace reduction was calculated to understand the acceptability of the configurations in different domains. Apart from the loss, the result disclosed that the actual workspace of all the manipulators was within the feasible workspace domain of mobile platform. The PPR-PRP-PRR manipulator was found to possess highest experimental workspace than other configurations. Note: P, P, and R refer to active prismatic, passive prismatic and passive revolute joints respectively.
The applications of light weight planar parallel robotic manipulators are increasing enormously because of their various desirable characteristics such as low weight, lower inertia, higher stiffness, energy efficiency etc. Higher accelerations and accuracies can be achieved using planar parallel manipulators (PPMs). Also, Shape Memory Alloy (SMA) based actuators are replacing huge and bulky actuators as SMA actuators provide higher work per unit mass as compared to other actuators and also undergoes silent actuation by simple actuation process. In the present study, three configurations (3PRP, PPR-2PRP and PRR-2PRP) of 3 degrees of freedom U-shaped base planar parallel robotic manipulator have been presented using SMA based smart actuators. The manipulator constitutes of one fixed base and one moving platform. The SMA spring acts as linear actuators mounted on the base which is connected to the end effector with the help of three limbs. A detailed experimental study was carried out to understand the workspace associated with each configuration. The movement of manipulators was investigated with the various combinations associated with the input SMA translation joints. And the study showed that the various configurations acquire different areas of workspace in the manipulator region. This study also shows the essence of SMA springs in PPMs for precise and accurate positioning of the end-effector and also its tracking ability for the development of future micro-motion stage. Note: P refers to Passive Prismatic Joint, R refers to Passive Revolute Joint and P refers to Active Prismatic Joint.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.