Based on the nonlinear of the photovoltaic device output power and the frequent changes in the work environment, a fuzzy controller with genetic algorithm was applied to maximum power point tracking (MPPT) of photovoltaic generation system. The problem of difference in the different interval of the maximum point was solved. It ensure that the system has a higher accuracy .By comparing the method of the fuzzy control and the method of fuzzy control with genetic algorithm through simulation , the result demonstrates the better control effect.
By study on the current domestic cutting technics of vertical-pull glass pipe, in this paper a new and practical design of automatic cutting robot is peoposed. Its motion process is introduced on the basis of performance requirement, and then the overall structure of automatic cutting robot for vertical-pull glass pipe is designed, especially the electro-hydraulic proportional control systems for frame rotation and fuselage lifting. Meanwhile the stability and respond speed of hydraulic systems is well analyzed with matlab software. The results of open-loop bode diagram of the frame rotation system and unit step response diagram of fuselage lifting system indicate that the automatic cutting robot has excellent system stability and respond speed. It can content the requirement of position accuracy, reduce the labor intensity with high productivity and liberate the workers from wicked environment.
The hydraulic cylinder is an actuator of hydraulic lifting system in the heavy tipper, which also plays an important role in unloading. Aiming at the existing multistage hydraulic cylinder design method's insufficiency, the CAD/CAE technology is introduced into the domains of multistage hydraulic cylinder design. In this paper push-forwarding five-stage hydraulic cylinder is designed, and virtual assembly is established based on three-dimensional digital model using PRO/E sofeware. The multistage hydraulic cylinder's load-supporting characteristics are analyzed by ANSYS. The result of finite element analysis shows that the stress on the top front part of three down hydraulic cylinder is biggest, those on the trunnion and the cylinder's bottom are also bigger. It is also proved that the multistage hydraulic cylinder designed with CAD/CAE technology can satisfy the requirements of intensity, rigidity and supporting stability.
A sort of two axes auto- tracking solar photovoltaic system based on Mitsubishi FA productions to solve the problem of low conversion efficiency in existing systems. It is discussed that how to design frames of input、control、execution 、functions and control strategies. The method of timing light intensity comparison is proposed to achieve automatic tracking of solar cells. This system can regulate automatically the horizontal angle and the vertical angle of the battery board by controlling circuits of sensors, plc, transducer and amplifier. Sound results are shown by tracking maximum conversion efficiency of this system.
The 650nm plastic optical fiber transmission system includes 650nm optical Ethernet switch, 650nm optical network card, 650nm optical wavelength converter, 650nm photoelectric converter and 650nm optical repeater. Polymer optical fiber is used as transmission medium, the use of photoelectric technology, network technology, embedded chip and software technology, and system integration. The system can replace the existing twisted-pair copper wire LAN system.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.