This paper critically investigates the advantages and limitations of the current-transient methods used for the study of the deep levels in GaN-based high-electron mobility transistors (HEMTs), by evaluating how the procedures adopted for measurement and data analysis can influence the results of the investigation. The article is divided in two parts within Part I. 1) We analyze how the choice of the measurement and analysis parameters (such as the voltage levels used to induce the trapping phenomena and monitor the current transients, the duration of the filling pulses, and the method used for the extrapolation of the time constants of the capture/emission processes) can influence the results of the drain current transient investigation and can provide information on the location of the trap levels responsible for current collapse. 2) We present a database of defects described in more than 60 papers on GaN technology, which can be used to extract information on the nature and origin of the trap levels responsible for current collapse in AlGaN/GaN HEMTs. Within Part II, we investigate how self-heating can modify the results of drain current transient measurements on the basis of combined experimental activity and device simulation

This paper presents an extensive investigation of the properties of the trap with activation energy equal to 0.6 eV, which has been demonstrated to be responsible for current collapse (CC) in AlGaN/GaN HEMTs. The study was carried out on AlGaN/GaN HEMTs with increasing concentration of iron doping in the buffer. Based on pulsed characterization and drain current transient measurements, we demonstrate that for the samples under investigation: 1) increasing concentrations of Fe-doping in the buffer may induce a strong CC, which is related to the existence of a trap level located 0.63 eV below the conduction band energy and 2) this trap is physically located in the buffer layer, and is not related to the iron atoms but—more likely—to an intrinsic defect whose concentration depends on buffer doping. Moreover, we demonstrate that this level can be filled both under OFF-state conditions (by gate-leakage current) and under ON-state operation (when hot electrons can be injected to the buffer): for these reasons, it can significantly affect the switching properties of AlGaN/GaN HEMTs

Slow trapping phenomenon in AlGaN/GaN HEMTs has been extensively analyzed and described in this paper. Thanks to a detailed investigation, based on a combined pulsed and transient investigation of the current/voltage characteristics (carried out over on an 8-decade time scale), we report a detailed description of the properties of trap levels located in the gate-drain surface, and in the region under the gate of AlGaN/GaN HEMTs. More specifically, the following, relevant results have been identified: (i) the presence of surface trap states may determine a significant current collapse, and reduction of the peak transconductance. During a current transient measurement, the emission of electrons trapped at surface states proceeds through hopping, as demonstrated by means of temperature-dependent measurements. The activation energy of the de-trapping process is equal to 99 meV. (ii) The presence of a high density of defects under the gate may induce a significant shift in the threshold voltage, when devices are submitted to pulsed transconductance measurements. The traps responsible for this process have an activation energy of 0.63 eV, and are detected only on samples with high gate leakage, since gate current allows for a more effective charging/de-charging of the defects.

Despite the potential of GaN-based power transistors, these devices still suffer from certain parasitic and reliability issues that limit their static and dynamic performance and the maximum switching frequency. The aim of this paper is to review our most recent results on the parasitic mechanisms that affect the performance of GaN-on-Si HEMTs; more specifically, we describe the following relevant processes: (i) trapping of electrons in the buffer, which is induced by offstate operation; (ii) trapping of hot electrons, which is promoted by semi-on state operation; (iii) trapping of electrons in the gate insulator, which is favored by the exposure to positive gate bias. Moreover, we will describe one of the most critical reliability aspects of Metal-Insulator-Semiconductor HEMTs (MIS-HEMTs), namely time-dependent dielectric breakdown.

No abstract

No abstract

No abstract

No abstract