This study assesses the life-cycle environmental implications linked to the energy efficiency improvement by a nano-technological aerogel based panel insulation solution. A cradle to grave approach has been taken for the environmental evaluation of the product life-cycle, including its integration in an existing residential building for the evaluation of the building´s use phase. The model developed has been also assessed in the 5 European climate zones, evaluating the different performance due to the different weather conditions and the effect of increasing the thickness used. Also, an evaluation of the impacts achieved depending on the heating source used, together with the comparative analysis with other traditional insulation materials complete the paper.

Building renovation was declared a key point for sustainable development, however, the renovation rate of residential buildings in the European Union is insufficient to meet the climate and energy targets set. This paper analyses the main circular economy models used in the construction sector, as well as the situation of the building renovation market, to set a framework for circular economy models in building renovation. Of all the existing strategies in this sector, design, material recovery, building renovation and end-of-life actions would be the best, respectively. It also includes a market analysis consisting of a literature review covering PEST perspectives (political, economic, social and technical) and a SWOT analysis (strengths, weaknesses, opportunities and threats), concluding with a market gap analysis. The results of these analyses allow the development of a series of suggestions and strategies to be followed in order to solve the main barriers that hinder the implementation of the circular economy in the building´s renovation sector.

European tertiary sector represents about 13% of EU-28 final energy consumption. As an example, food retail stores sector amounts about 3% of EU members' electricity consumption. Furthermore, currently, fluorinated gases, which are the most used refrigerants for space conditioning and refrigeration systems, involve 2% of EU emissions, having risen since 1990 by 60%. Specifically, commercial refrigeration is responsible for 35% of EU-27 CO2-eq emissions related to refrigerants.

At urban level, the generation Municipal Solid Waste and Construction and Demolition Waste is mostly related to the life-cycle of buildings. An evaluation method based on Life Cycle Assessment methodology is presented in this paper to make an analysis of the environmental performance of different life-cycle building waste management strategies in tertiary buildings. As a case study, several waste management strategies considering a tertiary building located in the city of Zaragoza in Spain, are studied. The aim of the case study is to compare the environmental impacts, in terms of Global Warming Potential, of the scenarios proposed focusing on the waste minimisation and avoidance of landfilling of at least 10% for the Municipal Solid Waste generation during a building´s use stage, and Construction and Demolition Waste generated during its construction and end-of-life. In case of Municipal Solid Waste, the results show that when a recovery scenario includes energy recovery from the residual fraction of the mechanical-biological treatment plant in the form of Refuse Derived Fuel, greater benefits in terms of the Global Warming Potential are obtained than with current scenarios of landfill deposition of the residual fraction. On the other hand, in case of Construction and Demolition Waste, a similar situation can be observed in case of an increase of the recovery rates of metals.