A strategy based on reticulating metal ions and organic carboxylate links into extended networks has been advanced to a point that allowed the design of porous structures in which pore size and functionality could be varied systematically. Metal-organic framework (MOF-5), a prototype of a new class of porous materials and one that is constructed from octahedral Zn-O-C clusters and benzene links, was used to demonstrate that its three-dimensional porous system can be functionalized with the organic groups -Br, -NH2, -OC3H7, -OC5H11, -C2H4, and -C4H4 and that its pore size can be expanded with the long molecular struts biphenyl, tetrahydropyrene, pyrene, and terphenyl. We synthesized an isoreticular series (one that has the same framework topology) of 16 highly crystalline materials whose open space represented up to 91.1% of the crystal volume, as well as homogeneous periodic pores that can be incrementally varied from 3.8 to 28.8 angstroms. One member of this series exhibited a high capacity for methane storage (240 cubic centimeters at standard temperature and pressure per gram at 36 atmospheres and ambient temperature), and others the lowest densities (0.41 to 0.21 gram per cubic centimeter) for a crystalline material at room temperature.
Metal-organic framework-5 (MOF-5) of composition Zn4O(BDC)3 (BDC = 1,4-benzenedicarboxylate) with a cubic three-dimensional extended porous structure adsorbed hydrogen up to 4.5 weight percent (17.2 hydrogen molecules per formula unit) at 78 kelvin and 1.0 weight percent at room temperature and pressure of 20 bar. Inelastic neutron scattering spectroscopy of the rotational transitions of the adsorbed hydrogen molecules indicates the presence of two well-defined binding sites (termed I and II), which we associate with hydrogen binding to zinc and the BDC linker, respectively. Preliminary studies on topologically similar isoreticular metal-organic framework-6 and -8 (IRMOF-6 and -8) having cyclobutylbenzene and naphthalene linkers, respectively, gave approximately double and quadruple (2.0 weight percent) the uptake found for MOF-5 at room temperature and 10 bar.
The basic structures for linking squares into polyhedra and networks (reticulation) are enumerated, and corresponding examples are described in which crystals were synthesized by linking paddle wheel (square) units into metal-organic frameworks (MOFs)-named MOF-102 to MOF-112.
Improving the oral absorption of compounds with low aqueous solubility is a common challenge that often requires an enabling technology. Frequently, oral absorption can be improved by formulating the compound as an amorphous solid dispersion (ASD). Upon dissolution, an ASD can reach a higher concentration of unbound drug than the crystalline form, and often generates a large number of sub-micrometer, rapidly dissolving drug-rich colloids. These drug-rich colloids have the potential to decrease the diffusional resistance across the unstirred water layer of the intestinal tract (UWL) by acting as rapidly diffusing shuttles for unbound drug. In a prior study utilizing a membrane flux assay, we demonstrated that, for itraconazole, increasing the concentration of drug-rich colloids increased membrane flux in vitro. In this study, we evaluate spray-dried amorphous solid dispersions (SDDs) of itraconazole with hydroxypropyl methylcellulose acetate succinate (HPMCAS) to study the impact of varying concentrations of drug-rich colloids on the oral absorption of itraconazole in rats, and to quantify their impact on in vitro flux as a function of bile salt concentration. When Sporanox and itraconazole/AFFINISOL High Productivity HPMCAS SDDs were dosed in rats, the maximum absorption rate for each formulation rank-ordered with membrane flux in vitro. The relative maximum absorption rate in vivo correlated well with the in vitro flux measured in 2% SIF (26.8 mM bile acid concentration), a representative bile acid concentration for rats. In vitro it was found that as the bile salt concentration increases, the importance of colloids for improving UWL permeability is diminished. We demonstrate that drug-containing micelles and colloids both contribute to aqueous boundary layer diffusion in proportion to their diffusion coefficient and drug loading. These data suggest that, for compounds with very low aqueous solubility and high epithelial permeability, designing amorphous formulations that produce colloids on dissolution may be a viable approach to improve oral bioavailability.
Bioavailability-enhancing formulations are often used to overcome challenges of poor gastrointestinal solubility for drug substances developed for oral administration. Conventional in vitro dissolution tests often do not properly compare such formulations due to the many different drug species that may exist in solution. To overcome these limitations, we have designed a practical in vitro membrane flux test, that requires minimal active pharmaceutical ingredient (API) and is capable of rapidly screening many drug product intermediates. This test can be used to quickly compare performance of bioavailability-enhancing formulations with fundamental knowledge of the rate-limiting step(s) to membrane flux. Using this system, we demonstrate that the flux of amorphous itraconazole (logD = 5.7) is limited by aqueous boundary layer (ABL) diffusion and can be increased by adding drug-solubilizing micelles or drug-rich colloids. Conversely, the flux of crystalline ketoconazole at pH 5 (logD = 2.2) is membrane-limited, and adding solubilizing micelles does not increase flux. Under certain circumstances, the flux of ketoconazole may also be limited by dissolution rate. These cases highlight how a well-designed in vitro assay can provide critical insight for oral formulation development. Knowing whether flux is limited by membrane diffusion, ABL diffusion, or dissolution rate can help drive formulation development decisions. It may also be useful in predicting in vivo performance, dose linearity, food effects, and regional-dependent flux along the length of the gastrointestinal tract.
The successful synthesis and structural characterization of molecules that represent segments of extended solids is a valuable strategy for learning metric and stereochemical characteristics of those solids. This approach has been useful in cases in which the solids are particularly difficult to crystallize and thus their atomic connectivity and overall structures become difficult to deduce with X-ray diffraction techniques. One such class of materials is the covalently linked C(x)N(y) extended solids, where molecular analogues remain largely absent. In particular, structures of C(3)N(4) solids are controversial. This report illustrates the utility of a simple molecule, N(C(3)N(3))(3)Cl(6), in answering the question of whether triazine based C(3)N(4) phases are layered or instead they adopt 3D structures. Here, we present density functional calculations that clearly demonstrate the lower stability of graphitic C(3)N(4) relative to 3D analogues.
Two crystalline metal-organic frameworks formulated as Zn 6 (NDC) 5 (OH) 2 (DMF) 2 •4DMF, MOF-48, and Zn 7 (m-BDC) 6 (OH) 4 (H 2 O) 2 •6DMF•4H 2 O, MOF-49, (NDC = 1,4-naphthalenedicarboxylate; m-BDC = 1,3-benzenedicarboxylate) have been synthesized and fully characterized by single crystal X-ray diffraction studies, which reveal that the frameworks are constructed from pentagonal antiprismatic (MOF-48) and cuboctahedral (MOF-49) secondary building units respectively, however, both are reticulated into 3-D structures having the B network of CaB 6 .
Higher lipid solubility of lipophilic salt forms creates new product development opportunities for high-dose liquid-filled capsules. The purpose of this study is to determine if lipophilic salts of Biopharmaceutical Classification System (BCS) Class I amlodipine and BCS Class III fexofenadine, ranitidine, and metformin were better lipid formulation candidates than existing commercial salts. Lipophilic salts were prepared from lipophilic anions and commercial HCl or besylate salt forms, as verified by H-NMR. Thermal properties were assessed by differential scanning calorimetry and hot-stage microscopy. X-ray diffraction and polarized light microscopy were used to confirm the salt's physical form. All lipophilic salt forms were substantially more lipid-soluble (typically>10-fold) when compared to commercial salts. For example, amlodipine concentrations in lipidic excipients were limited to <5-10 mg/g when using the besylate salt but could be increased to >100 mg/g when using the docusate salt. Higher lipid solubility of the lipophilic salts of each drug translated to higher drug loadings in lipid formulations. In vitro tests showed that lipophilic salts solubilized in a lipid formulation resulted in dispersion behavior that was at least as rapid as the dissolution rates of conventional salts. This study confirmed the applicability of forming lipophilic salts of BCS I and III drugs to promote the utility of lipid-based delivery systems.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.