This work presents an innovative honeycomb cell geometry design with enhanced in-plane energy absorption under quasi-static lateral loads. Numerical and experimental compression tests results under axial and lateral loads are analyzed. The proposed cell geometry was designed to overcome the limitations posed by standard hexagonal honeycombs, which show relatively low stiffness and energy absorption under loads that have a significant lateral component. To achieve this, the new cell geometry was designed with internal diagonal walls to support the external walls, increasing its stiffness and impact energy absorption in comparison with the hexagonal cell. 3D-printed unit-cell specimens made from ABS thermoplastic material were subjected to experimental quasi-static compression tests, in both lateral and axial directions. Energy absorption was compared to that of the standard hexagonal cell, with the same mass and height. Finite element models were developed and validated using experimental data. Results show that the innovative geometry absorbs approximately 15% more energy under lateral compression, while maintaining the same level of energy absorption of the standard hexagonal cell in the axial direction. The present study demonstrates that the proposed cell geometry has the potential to substitute the standard hexagonal honeycomb in applications where significant lateral loads are present.
A major obstacle to obtaining cost-effective experimental data on the fatigue life of sandwich panels is the prohibitive amount of time and cost required to carry out millions of cycles. On the other hand, vibration techniques applied to sandwich geometries fail to match the stress patterns that are obtained from standard flexural fatigue tests. To overcome such limitations, a vibration-based fatigue technique is proposed, which entails the use of sandwich specimens whose geometries are optimized to reproduce the stress distribution observed during three point bend loading while vibrating at the first resonant frequency. The proposed vibration technique was experimentally validated. The results, compared with the average number of cycles to failure at different stress ratios obtained via the Three-Point Bending test, showed high levels of accuracy. The proposed method is robust and time effective and indicates the possibility of attaining fatigue lifetime prediction of a wide class of composite elements, such as sandwich panels.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.