Eight aromatic imine liquid crystalline (LC) diepoxides with dimeric architecture from readily available commercial reagents were synthesized and characterized by spectroscopic techniques. We characterized their liquid crystalline mesophases by differential scanning calorimetry (DSC), hot‐stage polarized‐light optical microscopy (POM) and wide‐angle X‐ray diffraction (WAXS). The mesomorphism of the products was related to their structure, which varies in the length of the central spacer. Odd‐membered spacer mesogens lead to the formation of smectic C mesophases, whereas even‐membered samples of this series lead to the formation of smectic A and/or nematic mesophases. By relating the calculated molecular parameters to the layer spacings obtained by WAXS, we deduced the organization of the mesogens in the smectic phases, since the dimeric compounds present a variety of possible arrangements. Liquid crystal thermosets (LCTs) were obtained from these monomers by isothermal curing with equimolar amounts of 2,4‐diaminotoluene (DAT). The curing process was studied by calorimetry and their thermal stability was evaluated by thermogravimetry (TGA). Most monomers produced nematic‐like networks, but in one case a smectic C mesophase was also locked.

We used readily available commercial reagents and well‐known procedures to synthesize a series of aromatic imine mesogenic diglycidylester compounds with dimeric architectures. The compounds obtained were characterized by spectroscopic techniques. Their liquid‐crystalline behavior was examined by differential scanning calorimetry, hot‐stage polarized optical microscopy (POM), and wide‐angle X‐ray scattering (WAXS) and related to the different structures that varied in the length of the central spacer. All the compounds exhibited nematic mesophases with the exception of the dimer with a three‐methylene central spacer that did not reveal liquid‐crystalline character. We investigated the crosslinking of the synthesized compounds and obtained liquid‐crystalline thermosets (LCTs) with several primary aromatic diamines in stoichiometric ratios or a tertiary amine as a catalyst. The curing processes were measured by calorimetry, and the thermal stability of the LCTs was evaluated by thermogravimetry. The ordered character of the LCTs was confirmed by POM and WAXS. Finally, the mechanical characterization of the LCTs obtained was examined by dynamic mechanical thermal analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4344–4356, 2002

Liquid‐crystalline thermosets (LCTs) were prepared by the curing of difunctional liquid‐crystalline dimeric epoxy monomers with imine moieties in the mesogenic core and central spacers of different lengths. Tertiary amines were used as catalysts in different proportions. The locked mesophases of the LCTs were characterized by polarized optical microscopy and wide‐angle X‐ray scattering and identified as smectic‐C, regardless of their smectic‐A or smectic‐C initial state. The influence of a 7.1‐T magnetic field on the macroscopic orientation of these materials was studied by dynamic mechanical analysis, and the orientation parameter was determined by IR dichroism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3916–3926, 2002

Liquid crystalline thermosets (LCTs) were prepared by curing difunctional LC dimeric epoxy monomers with imine moieties in the mesogenic core and central spacers of different length. Primary diamines or tertiary amines were used as curing agents obtaining materials with different characteristics. The results obtained were related to the mesogen structure, since dipolar moments in the mesogenic cores affect the ability to form ordered networks.

We studied the curing processes of several series of dimeric liquid‐crystalline epoxyimine monomers with 2,4‐toluene diisocyanate (TDI) alone or with added catalytic proportions of 4‐(N,N‐dimethylamino)pyridine. We obtained isotropic materials or liquid‐crystalline thermosets with different degrees of order, which depended on the structures of the monomers. To fix ordered networks, we had to do the curing in two steps when TDI was used alone as the curing agent. However, when a tertiary amine was added in catalytic proportions, the ordered networks were fixed in just one step. In this way, we were able to fix both nematic and smectic mesophases. The significance of the polarization of the mesogen for obtaining liquid‐crystalline thermosets was demonstrated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2521–2530, 2003