The electrochemical N2 reduction reaction (NRR) offers a direct pathway to produce NH3 from renewable energy. However, aqueous NRR suffers from both low Faradaic efficiency (FE) and low yield rate. The main reason is the more favored H+ reduction to H2 in aqueous electrolytes. Here we demonstrate a highly selective Ru/MoS2 NRR catalyst on which the MoS2 polymorphs can be controlled to suppress H+ reduction. A NRR FE as high as 17.6% and NH3 yield rate of 1.14 × 10–10 mol cm–2 s–1 are demonstrated at 50 °C. Theoretical evidence supports a hypothesis that the high NRR activity originates from the synergistic interplay between the Ru clusters as N2 binding sites and nearby isolated S-vacancies on the 2H-MoS2 as centers for hydrogenation; this supports formation of NH3 at the Ru/2H-MoS2 interface.

No abstract

Aberration-corrected transmission electron microscopy and high-angle annular dark field imaging was used to investigate the surface structures and internal defects of CeO2 nanoparticles (octahedra, rods, and cubes). Further, their catalytic reactivity in the water-gas shift (WGS) reaction and the exposed surface sites by using FTIR spectroscopy were tested. Rods and octahedra expose stable (111) surfaces whereas cubes have primarily (100) facets. Rods also had internal voids and surface steps. The exposed planes are consistent with observed reactivity patterns, and the normalized WGS reactivity of octahedra and rods were similar, but the cubes were more reactive. In situ FTIR spectroscopy showed that rods and octahedra exhibit similar spectra for -OH groups and that carbonates and formates formed upon exposure to CO whereas for cubes clear differences were observed. These results provide definitive information on the nature of the exposed surfaces in these CeO2 nanostructures and their influence on the WGS reactivity.

A suite of software tools (DiffTools) has been developed for DigitalMicrograph--a software platform widely used in transmission electron microscopy (TEM) laboratories world-wide. These tools include capabilities for calibration, center determination, rotational averaging with automatic peak location, pattern spot spacing and interspot angle determination, rotation and inset of a pattern into an image, pattern intensity inversion and enhancement, and calculation of basic crystallographic data. The implementation and application of these tools to experimental diffraction patterns is illustrated and measurement of d-spacings with an accuracy of 0.63% or better is demonstrated. These tools, which are freely available via the Internet, enable users to rapidly and efficiently process selected area electron diffraction patterns. This can be performed entirely within the DigitalMicrograph environment using familiar menu-based commands and user-friendly dialog-based scripts.

No abstract