We present a novel color fringe projection system to obtain absolute 3D shape and color of objects simultaneously. Optimum 3-frequency interferometry is used to produce time efficient analysis of the projected fringes by encoding three fringe sets of different pitch into the primary colors of a digital light projector and recording the information on a 3-chip color CCD camera. Phase shifting analysis is used to retrieve subwavelength phase information. Absolute phase across the field is calculated using the 3-frequency method independently at each pixel. Concurrent color data is also captured via the RGB channels of the CCD. Thus full-field absolute shape (XYZ) and color (RGB) can be obtained. In this paper we present the basis of the technique and preliminary results having addressed the issue of crosstalk between the color channels.

A conventional microscope produces a sharp image from just a single object-plane. This is often a limitation, notably in cell biology. We present a microscope attachment which records sharp images from several object-planes simultaneously. The key concept is to introduce a distorted diffraction grating into the optical system, establishing an order-dependent focussing power in order to generate several images, each arising from a different object-plane. We exploit this multiplane imaging not just for bio-imaging but also for nano-particle tracking, achieving approximately 10 nm z position resolution by parameterising the images with an image sharpness metric.

We describe a novel technique for measurement of absolute order of interference in multifrequency interferometry. An optimization criterion is introduced that leads to frequency selection formulations that are optimized with respect to the minimum number of frequencies required for achieving the maximum target dynamic range. The method is generalized to N frequencies and gives a definition of measurement reliability. We demonstrate the technique by means of coherent fringe projection for nonintrusive, full-field profilometry. Experimental data for three frequencies are presented.

The method of excess fractions (EF) is well established to resolve the fringe order ambiguity generated in interferometric detection. Despite this background, multiwavelength interferometric absolute long distance measurements have only been reported with varying degrees of success. In this paper we present a theoretical model that can predict the unambiguous measurement range in EF based on the selected measurement wavelengths and phase noise. It is shown that beat wavelength solutions are a subset of this theoretical model. The performance of EF, for a given phase noise, is shown to be equivalent to beat techniques but offers many alternative sets of measurement wavelengths and therefore EF offer significantly greater flexibility in experimental design.

BackgroundUnderstanding how mosquitoes respond to long lasting insecticide treated nets (LLINs) is fundamental to sustaining the effectiveness of this essential control tool. We report on studies with a tracking system to investigate behaviour of wild anophelines at an LLIN, in an experimental hut at a rural site in Mwanza, Tanzania.MethodsGroups of adult female mosquitoes (n = 10 per replicate) reared from larvae of a local population, identified as predominantly (95%) Anopheles arabiensis, were released in the hut. An infrared video tracking system recorded flight and net contact activity over 1 h as the mosquitoes attempted to reach a supine human volunteer within a bed net (either a deltamethrin-treated LLIN or an untreated control net). A range of activities, including flight path, position in relation to the bed net and duration of net contact, were quantified and compared between treatments.ResultsThe total time that female An. arabiensis spent in flight around LLINs was significantly lower than at untreated nets [F(1,10) = 9.26, p = 0.012], primarily due to a substantial reduction in the time mosquitoes spent in persistent ‘bouncing’ flight [F(1,10) = 18.48, p = 0.002]. Most activity occurred at the net roof but significantly less so with LLINs (56.8% of total) than untreated nets [85.0%; Χ2 (15) = 234.69, p < 0.001]. Activity levels at the bed net directly above the host torso were significantly higher with untreated nets (74.2%) than LLINs [38.4%; Χ2 (15) = 33.54, p = 0.004]. ‘Visiting’ and ‘bouncing’ rates were highest above the volunteer’s chest in untreated nets (39.9 and 50.4%, respectively) and LLINs [29.9 and 42.4%; Χ2 (13) = 89.91, p < 0.001; Χ2 (9) = 45.73, p < 0.001]. Highest resting rates were above the torso in untreated nets [77%; Χ2 (9) = 63.12, p < 0.001], but in LLINs only 33.2% of resting occurred here [Χ2 (9) = 27.59, p = 0.001], with resting times spread between the short vertical side of the net adjacent to the volunteer’s head (21.8%) and feet (16.2%). Duration of net contact by a single mosquito was estimated at 204–290 s on untreated nets and 46–82 s on LLINs. While latency to net contact was similar in both treatments, the reduction in activity over 60 min was significantly more rapid for LLINs [F(1,10) = 6.81, p = 0.026], reiterating an ‘attract and kill’ rather than a repellent mode of action.ConclusionsThe study has demonstrated the potential for detailed investigations of behaviour of wild mosquito populations under field conditions. The results validate the findings of earlier laboratory studies on mosquito activity at LLINs, and reinforce the key role of multiple brief contacts at the net roof as the critical LLIN mode of action.Electronic supplementary materialThe online version of this article (doi:10.1186/s12936-017-1909-6) contains supplementary material, which is available to authorized users.