Abstract. Tree water uptake processes and ecohydrological travel times have gained more attention in recent ecohydrological studies. In situ measurement techniques for stable water isotopes offer great potential to investigate these processes but have not been applied much to tree xylem and soils so far. Here, we used in situ probes for stable water isotope measurements to monitor the isotopic signatures of soil and tree xylem water before and after two deuterium-labeled irrigation experiments. To show the potential of the method, we tested our measurement approach with 20-year-old trees of three different species (Pinus pinea, Alnus incana and Quercus suber). They were planted in large pots with homogeneous soil in order to have semi-controlled experimental conditions. Additional destructive sampling of soil and plant material allowed for a comparison between destructive (cryogenic vacuum extraction and direct water vapor equilibration) and in situ isotope measurements. Furthermore, isotope-tracer-based ecohydrological travel times were compared to travel times derived from sap flow measurements. The time to first arrival of the isotope tracer signals at 15 cm stem hight were ca. 17 h for all tree species and matched well with sap-flow-based travel times. However, at 150 cm stem height tracer-based travel times differed between tree species and ranged between 2.4 and 3.3 d. Sap-flow-based travel times at 150 cm stem hight were ca. 1.3 d longer than tracer-based travel times. The isotope signature of destructive and in situ isotope measurements differed notably, which suggests that the two types of techniques sampled water from different pools. In situ measurements of soil and xylem water were much more consistent between the three tree pots (on average standard deviations were smaller by 8.4 ‰ for δ2H and by 1.6 ‰ for δ18O for the in situ measurements) and also among the measurements from the same tree pot in comparison to the destructive methods (on average standard deviations were smaller by 7.8 ‰ and 1.6 ‰ for δ2H and δ18O, respectively). Our study demonstrates the potential of semi-controlled large-scale pot experiments and very frequent in situ isotope measurements for monitoring tree water uptake and ecohydrological travel times. It also shows that differences in sampling techniques or sensor types need to be considered when comparing results of different studies and within one study using different methods.

Since the end of the Little Ice Age around 1850, the total glacier area of the central European Alps has considerably decreased. In order to understand the changes in glacier coverage at various scales and to model past and future streamflow accurately, long-term and large-scale datasets of glacier outlines are needed. To fill the gap between the morphologically reconstructed glacier outlines from the moraine extent corresponding to the time period around 1850 and the first complete dataset of glacier areas in the Swiss Alps from aerial photographs in 1973, glacier areas from 80 sheets of a historical topographic map (the Siegfried map) were manually digitized for the publication years 1878-1918 (further called first period, with most sheets being published around 1900) and 1917-1944 (further called second period, with most sheets being published around 1935). The accuracy of the digitized glacier areas was then assessed through a two-step validation process: the data were (1) visually and (2) quantitatively compared to glacier area datasets of the years 1850, 1973, 2003, and 2010, which were derived from different sources, at the large scale, basin scale, and locally. The validation showed that at least 70 % of the digitized glaciers were comparable to the outlines from the other datasets and were therefore plausible. Furthermore, the inaccuracy of the manual digitization was found to be less than 5 %. The presented datasets of glacier outlines for the first and second periods are a valuable source of information for long-term glacier mass balance or hydrological modelling in glacierized basins. The uncertainty of the historical topographic maps should be considered during the interpretation of the results. The datasets can be downloaded from the FreiDok plus data repository (https

Abstract. Recent advances in in situ measurement techniques for stable water isotopes offer new opportunities to improve the understanding of tree water uptake processes and ecohydrological travel times. In our semi–controlled experiment with 20–year–old trees of three different species (Pinus pinea, Alnus incana and Quercus suber) placed in large pots, we applied in situ probes for stable water isotope measurements to monitor the isotopic signatures of soil water and tree xylem before and after two deuterium labelled irrigations. Additional destructive sampling of soil and plant material complemented the in situ measurements and allowed for a comparison between destructive (cryogenic vacuum extraction and direct water vapour equilibration) and in situ isotope measurements. For the first labelling pulse, the tracer based travel time at a stem height of 15 cm was 0.7 days for all three tree species but at 150 cm height tracer based travel times ranged between 2.4 (for Alnus incana) and 3.3 days (for Quercus suber). The tracer based travel time from the root zone to 15 cm stem height was similar to the sap flow based travel times (i. e., for all trees 0.7 days). However, sap flow based travel times were 1.3 days (for Alnus incana) longer than tracer based travel times at 150 cm stem height. In terms of different between tree species, we found similar tracer movement in Pinus pinea and Alnus incanca while in Quercus suber tracer travel times were longer which is likely due to lower water uptake rates of Quercus suber. The comparison of destructive and in situ isotope measurement techniques suggests notable differences in the sampled water pools. In situ measurements of soil and xylem water were much more consistent between the three tree pots (on average standard deviations were by 8.4 ‰ smaller for δ2H and by 1.6 ‰ for δ18O for the in situ measurements) but also among the measurements from the same tree pot in comparison to the destructive methods (on average standard deviations were by 7.8 ‰ and 1.6 ‰ smaller for δ2H and δ18O, respectively). Our study demonstrates the potential of semi-controlled large scale pot experiments and high-frequent in situ isotope measurements for monitoring tree water uptake and ecohydrological travel times. It also shows that differences in sampling techniques or sensor types need to be considered, when comparing results of different studies and within one study using different methods.

Microplastics are a ubiquitous contaminant of natural waters, and a lot of field monitoring is currently performed. However, what is missing so far is a general understanding how emissions of microplastics are linked to environmental exposure, especially on larger geographic scales such as countries. Here we coupled a high-resolution microplastic release model with a fate model in rivers and lakes and parameterized it for Switzerland on a country scale to predict masses of microplastics in each river section for seven different polymers. The results show that catchment characteristics, for example, distribution of releases within the catchment, location and size of lakes or river connections, are as important as polymer properties such as density. There is no simple linear function of microplastic retention within a catchment in dependency of river length to the outlet. Instead, we found that different catchments cover a wide range of retained fractions for microplastics. Consequently, we argue that the availability and use of spatially distributed release data and performing modelling on high spatial resolution is of importance when estimating concentrations of microplastics in large areas such as countries.

No abstract

Abstract. Since the end of the Little Ice Age around 1850, the total glacier area of the Central European Alps has considerably decreased. In order to understand the changes in glacier coverage at various scales and to model past and future streamflow accurately, long-term and large-scale datasets of glacier outlines are needed. To fill the gap between the morphologically reconstructed glacier outlines from the moraine extent corresponding to the time period around 1850 and 10 the first complete dataset of glacier areas in the Swiss Alps from aerial photographs in 1973, glacier area from 80 sheets of a historical topographic map, so-called Siegfried map, were manually digitized for the publication years 1878-1918 (further called first period, with most sheets being published around 1900) and 1917-1944 (further called second period, with most sheets being published around 1935). The accuracy of the digitized glacier areas was then assessed through a two-step validation process: the data was (1) visually and (2) quantitatively compared to glacier area datasets of the years 1850, 1973, 15 2003, and 2010, which were derived from different sources. The validation showed that at least 70 % of the digitized glaciers were comparable to the outlines from the other datasets and were therefore plausible. Furthermore, the accuracy of the manual digitization was found to be lower than 5 %. The presented datasets of glacier outlines for the first and second periods were found to be valuable source of information for long-term glacier mass balance or hydrological modelling in glacierized basins if the uncertainty of the historical topographic maps is considered in the interpretation of the results. The 20 datasets can be downloaded from the FreiDok plus data repository (https://freidok.uni-freiburg.

<p>Water isotope tracing techniques in combination with laser-based isotopic analyses have advanced our understanding of plant water uptake patterns providing opportunities to carry out observational studies at high spatio-temporal resolution. Studying these highly dynamic processes at the interface between soils and trees can be challenging under natural field conditions, as available water resources are difficult to control. On the other hand, the results of small pot experiments in the greenhouse using tree seedlings are often difficult to transfer to mature trees. Here, we setup a controlled outdoor large pot experiment with three different, 4-6 meter high and 20 year old trees: <em>Pinus pinea, Alnus <span>spaethii</span> and Quercus suber.</em> We took advantage of stable water isotope techniques by tracing plant water uptake from the root zone through the xylem via isotopically labelled irrigation water. We combined ecohydrological observations of sapflow, photosynthesis, soil moisture and temperature and soil matrix potential with high resolution measurements of water stable isotopes in soils and trees to understand how soil water is used by different tree species. We monitored the isotopic composition of soil and xylem water in high temporal resolution with in-situ isotope probes installed at different depths in the soil and different heights in the tree stem. We further compared the water isotopic composition of our in-situ monitoring setup with destructive sampling methods for soil and plant water (vapour equilibration method and cryogenic extraction).</p><p>Our results from the continuous monitoring showed a distinct difference in the xylem sap isotopic signature between<em> Quercus</em> on the one hand and <em>Alnus</em> and <em>Pinus</em> on the other hand. This is likely due to different water use strategies of these tree species. The tree xylem isotopic signature of <em>Alnus</em> and <em>Pinus</em> responded to the isotopic label within one day and six days at 15 cm and 150 cm stem height, respectively. The peak isotopic signature in the tree xylem due to the label application was similar to the isotopic signature of the soil in 30 cm (for <em>Alnus</em>) and 15 cm (for <em>Pinus</em>). <em>Quercus</em> showed a delayed and much slower increase in the xylem isotopic signature in response to the label and the highest values were significantly lower than the corresponding soil isotopic signatures. Our methodological comparison showed that the isotopic signature of the destructive samples (from both methods) had a larger spread and this spread tended to become larger with subsequent labeling. Destructive soil samples showed a wider isotopic variation than destructive xylem samples. The in-situ isotope measurements in comparison showed a relative constant small to medium spread for soil and xylem isotopic measurements. Our in-situ isotope probes therefore seem to be a potential alternative or supplement to destructive sampling offering much higher temporal resolution. The continuation of the labeling experiments in 2020 will allow us to further study tree-species specific water uptake strategies, which will become important under future climatic conditions in terms of development of adaptation strategies for sustainable forest management.</p>

<p>Stable water isotopes are promising tracers to study soil-tree interactions and root water uptake. Traditionally, destructive sampling techniques are applied to measure the isotopic signature in soils and plant tissues but these methods are limited in their temporal resolution. For calculating ecohydrological travel times from soil water to transpiration, high frequent isotope measurements are required. Recently, in-situ water isotope probes have been successfully applied in beech trees to yield high-frequent isotope measurements under field conditions but the complexity and heterogeneity of natural field conditions can make a systematical method testing difficult. Here, we test whether the new probes are capable of capturing tree species-specific differences in root water uptake and associated travel times.<br>We test this in a controlled experiment using large pots with three 4-6 meter high and 20 year old coniferous and deciduous trees: <em>Pinus pinea</em>, <em>Alnus</em> <em>x spaethii</em> and <em>Quercus</em> <em>suber</em> that are expected to have different water uptake strategies. We applied deuterated irrigation water to the homogeneous soils in the pots and traced the water flux from the soils through the trees with in-situ isotope probes in high temporal resolution.<br>This contribution presents preliminary results on ecohydrological travel times in relation to environmental parameters such as sap flow, photosynthetic activity, matrix potential, soil water content, water vapor pressure deficit and solar radiation.<br>Our in-situ isotope probes were capable to capture the breakthrough of the isotope tracer in all trees. The calculated travel times were shorter for the Pinus and Alnus compared to the Quercus which suggests differences in root water uptake. Detailed results from such controlled experiments are fundamental for testing new measurement techniques such as the in-situ isotope probes. Such results are important to better interpret results measured under natural and therefore more complex and heterogeneous field conditions.</p>