Five alumina-supported palladium catalysts have been prepared from a range of precursor compounds [palladium(II) nitrate, palladium(II) chloride, palladium(II) acetylacetonate, and tetraamminepalladium(II) tetraazidopalladate(II)] and at different metal loadings (1-7.3 wt %). Collectively, this series of catalysts provides a range of metal particle sizes (1.2-8.5 nm) that emphasize different morphological aspects of the palladium crystallites. The infrared spectra of chemisorbed CO applied under pulse-flow conditions reveal distinct groupings between metal crystallites dominated by low index planes and those that feature predominantly corner/edge atoms. Temperature-programmed infrared spectroscopy establishes that the linear CO band can be resolved into contributions from corner atoms and a combination of (111)(111) and (111)(100) particle edges. Propene hydrogenation has been used as a preliminary assessment of catalytic performance for the 1 wt % loaded catalysts, with the relative inactivity of the catalyst prepared from palladium(II) chloride attributed to a diminished hydrogen supply due to decoration of edge sites by chlorine originating from the preparative process. It is anticipated that refinements linking the vibrational spectrum of a probe molecule with surface structure and accessible adsorption sites for such a versatile catalytic substrate provide a platform against which structure/reactivity relationships can be usefully developed.

methyl chloride synthesis, the deactivation of methane reforming catalysts, and a model carbon monoxide oxidation catalyst.

The influence of metal particle size of monometallic and bimetallic supported catalysts (Au, Pd, Au-Pd)/C was studied using as a model reaction the liquid phase oxidation of glycerol. By tuning the metal particle size from 2 to 16 nm a progressive decrease of activity and simultaneously an increase in the selectivity to sodium glycerate was observed. Moreover, the influence of the temperature was studied and it was found that by increasing the temperature, only with a large particle size the formed glycerate was retained and not over-oxidized to tartronate.

No abstract

The surface acidity of an activated eta-alumina catalyst has been investigated by examining the interaction of pyridine with the catalyst by a combination of gravimetric and volumetric adsorption isotherms, infrared spectroscopy (diffuse reflectance and transmission), inelastic neutron scattering spectroscopy, temperature-programmed desorption spectroscopy, and gravimetric desorption experiments. From previous work, this surface was considered to contain three types of Lewis acid sites of increasing acidity: weak, medium, and strong. However, this multitechnique approach reveals the presence of an additional type of Lewis acid site. Although the traditional pyridine ring modes about 1580 cm(-1) are consistent with previous studies, temperature-programmed infrared spectroscopy of the surface hydroxyl groups and mass-selective temperature-programmed desorption experiments establish that the medium-strength Lewis acid category can be subdivided into two components. In this way, the surface structure of the activated catalyst is redefined as comprising (i) weak, (ii) medium-weak, (iii) medium-strong and (iv) strong Lewis acid sites. The (O-H) stretching mode of surface hydroxyl groups provides information on the local structure of the distinct sites, and schematic descriptions for these sites are proposed.