We developed an inter-chip optical link using direct optical wire (DOW) bonding by open-to-air polymerization. An arch-shaped wire was drawn from a tip in a similar way to a metal wire, but the wire was formed from a polymer solution that solidified in the air during wiring. The DOW bonding was examined for silicon photonic chips where grating couplers are integrated for input/output coupling. Cone-shaped studs were formed at the ends of the wire, and their geometry was optimized using finite-difference time-domain simulation to give a mode conversion function. Although the polymer wire had a multimode scale of 7 µm, the wire bonding between the grating couplers showed a relatively low insertion loss of 5.8 dB at a wavelength of 1590 nm compared to a conventional connection using single-mode fiber blocks. It also showed a larger wavelength tolerance within the range of ∼1520–1590 nm. DOW bonding between a grating coupler and a single-mode fiber were also examined to verify the feasibility of out-of-plane connection with edge-coupling devices. The grating-to-fiber wire link also exhibited a large wavelength tolerance.
Bismuth-substituted yttrium iron garnet (Bi:YIG) films were prepared by using spin coating processes with metal-organic-decomposition-method-based solutions on crystalline silicon (Si) substrates, and their magneto-optic properties at the 1550-nm wavelength region were investigated by performing various thermal treatments. The maximum Verdet constant of the Bi1Y2Fe5O12 film on the Si substrate with a middle buffer layer of Bi2Y1 Fe5 O12 was measured to be 1 072 038°/T/m at 1550-nm wavelength in the unsaturated linear magnetization region by accounting for the negative Verdet constant of the silicon substrate. The optimum thermal treatment condition was observed at the maximum annealing temperature of 700 °C and the annealing speed of 3 °C/min. These spin coating enabled processes may be included to the conventional complementary metal-oxide semiconductor fabrication processes to demonstrate integrated optical waveguide-type isolators on silicon-on-insulator wafers.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.