Metal-intermetallic (aluminide) laminate (MIL) composites have been fabricated in air using dissimilar metal foils. Foils of varying Al thickness were reacted with foils of Ti-3Al-2.5V resulting in microstructures of well-bonded metal-intermetallic layered composites with either Ti or Al residual metal layers alternating with the Al 3 Ti intermetallic layers. The MIL composites exhibit a very high degree of microstructural design and control. Microstructure characterization by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffractometry (XRD) has been performed, and basic physical properties of the Ti-Al composites have been determined. The Ti-Al reaction has been studied by interrupting the reaction processing, in steps, to observe the microstructural changes. An oxide layer between the Ti and Al foils initially controls the reaction kinetics. After breakdown of the oxide layer, a two-phase Al ϩ Al 3 Ti layer (ϳ10 m thickness) is formed. After formation of the two-phase layer, liquid phases are continuously present, and Al 3 Ti spherules (ϳ10 m diameter) are formed through interfacial tension, solidify (in times of 2 to 4 s), and are expelled into the liquid. This mechanism allows for a continuous reaction interface and higher reaction rates. Both reaction regimes, diffusion through the oxide, and, subsequently, the intermetallic phase reaction mechanism result in linear kinetics.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.