The manufacturing of technical catalysts generally involves a sequence of different process steps, of which co-precipitation is one of the most important. In this study, we investigate how continuous co-precipitation influences the properties of Cu/ZnO/ZrO2 (CZZ) catalysts and their application in the direct synthesis of dimethyl ether (DME) from CO2/CO/H2 feeds. We compare material characteristics investigated by means of XRF, XRD, N2 physisorption, H2-TPR, N2O-RFC, TEM and EDXS as well as the catalytic properties to those of CZZ catalysts prepared by a semi-batch co-precipitation method. Ultra-fast mixing in continuous co-precipitation results in high BET and copper surface areas as well as in improved metal dispersion. DME synthesis performed in combination with a ferrierite-type co-catalyst shows correspondingly improved productivity for CZZ catalysts prepared by the continuous co-precipitation method, using CO2-rich as well as CO-rich syngas feeds. Our continuous co-precipitation approach allows for improved material homogeneity due to faster and more homogeneous solid formation. The so-called “chemical memory” stamped during initial co-precipitation is kept through all process steps and is reflected in the final catalytic properties. Furthermore, our continuous co-precipitation approach may be easily scaled-up to industrial production rates by numbering-up. Hence, we believe that our approach represents a promising contribution to improve catalysts for direct DME synthesis.
Catalyst systems for the conversion of synthesis gas, which are tolerant to fluctuating CO/CO2 gas compositions, have great potential for process-technical applications, related to the expected changes in the synthesis gas supply.
Experimental kinetics studies and model-based optimization were performed for the direct synthesis of dimethyl ether (DME) in a wide range of process conditions, including various CuO/ZnO/ZrO2:H-FER 20 bed compositions. This,...
In order to enable science-and knowledge-based adaptation of catalyst materials to new demands, e.g., methanol synthesis from CO 2 , a modified method to prepare Cu/Zn-based catalysts based on the strict consecutive execution of co-precipitation and aging is investigated. By successfully stabilizing the initial co-precipitate, two mixing regimes are revealed: regarding slow mixing, the particle size of the co-precipitate decreases with increasing volume flow. By contrast, co-precipitation is no longer influenced by mixing for sufficiently high volume flows. While aging can be accelerated by forming smaller aggregates in the co-precipitation, the final state is found to be defined by thermodynamic equilibrium alone. Furthermore, the microstructure of the final catalyst was influenced and the performance in direct dimethyl ether synthesis was improved by adjusting the mixing in the co-precipitation. We believe that the approach could be scaled-up to industrial production rates and, hence, is promising to make methanol synthesis from CO 2 more effective and sustainable.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.