Algae-derived biocrude oil is a possible renewable energy alternative to fossil fuel based crude oil. Outdoor cultivation in raceway ponds is estimated to provide a better return on energy invested than closed photobioreactor systems. However, in these open systems, algal crops are subjected to environmental variation in temperature and irradiance, as well as biotic invasions which can cause costly crop instabilities. In this paper, we used an experimental approach to investigate the ability of species richness to maximize and stabilize biocrude production in the face of weekly temperature fluctuations between 17 and 27 °C, relative to a constant-temperature control. We hypothesized that species richness would lead to higher mean biocrude production and greater stability of biocrude production over time in the variable temperature environment. Counter to our hypothesis, species richness tended to cause a decline in mean biocrude production, regardless of environmental temperature variation. However, biodiversity did have stabilizing effects on biocrude production over time in the variable temperature environment and not in the constant temperature environment. Altogether, our results suggest that when the most productive and stable monoculture is unknown, inoculating raceway ponds with a diverse mixture of algae will tend to ensure stable harvests over time.

Hydrothermal liquefaction (HTL) is a technology for converting algal biomass into biocrude oil and high-value products. To elucidate the underlying kinetics for this process, we conducted isothermal and non-isothermal reactions over a broad range of holding times (10s-60min), temperatures (100-400°C), and average heating rates (110-350°Cmin(-1)). Biocrude reached high yields (⩾37wt%) within 2min for heat-source set-point temperatures of 350°C or higher. We developed a microalgal HTL kinetic model valid from 10s to 60min, including significantly shorter timescales (10s-10min) than any previous model. The model predicts that up to 46wt% biocrude yields are achievable at 400°C and 1min, reaffirming the utility of short holding times and "fast" HTL. We highlight potential trade-offs between maximizing biocrude quantity and facilitating aqueous phase recovery, which may improve biocrude quality.

No abstract

For algal biofuels to become a commercially viable and sustainable means of decreasing greenhouse gas emissions, growers are going to need to design feedstocks that achieve at least three characteristics simultaneously as follows: attain high yields; produce high quality biomass; and remain stable through time. These three qualities have proven difficult to achieve simultaneously under the ideal conditions of the laboratory, much less under field conditions (e.g., outdoor culture ponds) where feedstocks are exposed to highly variable conditions and the crop is vulnerable to invasive species, disease, and grazers. Here, we show that principles from ecology can be used to improve the design of feedstocks and to optimize their potential for "multifunctionality." We performed a replicated experiment to test these predictions under outdoor conditions. Using 80 ponds of 1,100 L each, we tested the hypotheses that polycultures would outperform monocultures in terms of the following functions: biomass production, yield of biocrude from biomass, temporal stability, resisting population crashes, and resisting invasions by unwanted species. Overall, species richness improved stability, biocrude yield, and resistance to invasion. While this suggests that polycultures could outperform monocultures on average, invasion resistance was the only function where polycultures outperformed the best single species in the experiment. Due to tradeoffs among different functions that we measured, no species or polyculture was able to maximize all functions simultaneously. However, diversity did enhance the potential for multifunctionality-the most diverse polyculture performed more functions at higher levels than could any of the monocultures. These results are a key finding for ecological design of sustainable biofuel systems because they show that while a monoculture may be the optimal choice for maximizing short-term biomass production, polycultures can offer a more stable crop of the desired species over longer periods of time.

The aim of this study was to determine if polycultures of algae could enhance tolerance to aqueous-phase coproduct (ACP) from hydrothermal liquefaction (HTL) of algal biomass to produce biocrude. The growth of algal monocultures and polycultures was characterized across a range ACP concentrations and sources. All of the monocultures were either killed or inhibited by 2% ACP, but polycultures of the same species were viable at up to 10%. The addition of ACP increased the growth rate (up to 25%) and biomass production (53%) of polycultures, several of which were more productive in ACP than any monoculture was in the presence or absence of ACP. These results suggest that a cultivation process that applies biodiversity to nutrient recycling could produce more algae with less fertilizer consumption.